Can anyone please give me the inside and outside dimensions of or the older type MSA cross shafts nylon bushes?
Cheers Jimmy.
Older MSA nylon cross shafts bushes size inside and outside.
Moderator: Dave Mudgett
-
Jimmy Gibson
- Posts: 892
- Joined: 13 Nov 2002 1:01 am
- Location: Cornwall, England
-
Donny Hinson
- Posts: 21650
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
Re: Older MSA nylon cross shafts bushes size inside and outside.
They're a standard 3/8" ID and 1/2" OD bushing.
Actual dimensions measure about .379" ID and .500 OD on a new bushing.
The flange diameter is .625" or 5/8".
(Generally, there's a little bit of slop on the ID of manufactured bushings. But if you get 3/8" bushings and the ID is a little tight for the cross shaft, they can be opened up slightly by using a small piece of rolled-up fine sandpaper.)
Actual dimensions measure about .379" ID and .500 OD on a new bushing.
The flange diameter is .625" or 5/8".
(Generally, there's a little bit of slop on the ID of manufactured bushings. But if you get 3/8" bushings and the ID is a little tight for the cross shaft, they can be opened up slightly by using a small piece of rolled-up fine sandpaper.)
-
Michael Yahl
- Posts: 895
- Joined: 21 Jun 2010 1:39 pm
- Location: Troy, Texas!
- Contact:
Re: Older MSA nylon cross shafts bushes size inside and outside.
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG Parts, LLC
http://www.psgparts.com/
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG Parts, LLC
http://www.psgparts.com/
-
Jimmy Gibson
- Posts: 892
- Joined: 13 Nov 2002 1:01 am
- Location: Cornwall, England
Re: Older MSA nylon cross shafts bushes size inside and outside.
Thanks guys, very much appreciated. Jimmy.