how do you make a PSG cry or wine
Moderator: Dave Mudgett
-
Jerry Recktenwald
- Posts: 175
- Joined: 22 May 2011 8:52 pm
- Location: Louisville KY
- State/Province: -
- Country: United States
how do you make a PSG cry or wine
On slow country songs the steel guitar makes a winy or crying sound. I am probably not calling the effect by the right name.
-
Lane Gray
- Posts: 13684
- Joined: 4 Aug 1998 11:00 pm
- Location: Topeka, KS
- State/Province: -
- Country: United States
You're probably talking about the combination of a mild vibrato and sustain.
The problem with the vibrato is that, unless it's subtle, it sounds like hell, but you can never learn a skill and start with subtle.
For the sustain part, turn your amp UP. My amps are all quiet powerful, and they're all turned up to 5, 6 or 7.
The problem with the vibrato is that, unless it's subtle, it sounds like hell, but you can never learn a skill and start with subtle.
For the sustain part, turn your amp UP. My amps are all quiet powerful, and they're all turned up to 5, 6 or 7.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
More amps than guitars, and not many effects
-
Mike Perlowin RIP
- Posts: 15171
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA
- State/Province: -
- Country: United States
There is a technique called bar shiver. The way I do it is to loosen my grip on the bar a little between my thumb and middle finger, and sort of toss it back and forth between then, while I'm sliding the bar from one fret to another, then tightening the grip up again when the desired fret is reached.
It's very easy to lose control of the bar while doing this. You have to work at it. The key word here is (drum roll please) PRACTICE, PRACTICE, and MORE PRACTICE.
It's very easy to lose control of the bar while doing this. You have to work at it. The key word here is (drum roll please) PRACTICE, PRACTICE, and MORE PRACTICE.
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
-
Lane Gray
- Posts: 13684
- Joined: 4 Aug 1998 11:00 pm
- Location: Topeka, KS
- State/Province: -
- Country: United States
-
Jeff Metz Jr.
- Posts: 1783
- Joined: 2 Mar 2011 1:46 pm
- Location: York, Pennsylvania, USA
- State/Province: Pennsylvania
- Country: United States
-
Jerry Recktenwald
- Posts: 175
- Joined: 22 May 2011 8:52 pm
- Location: Louisville KY
- State/Province: -
- Country: United States
-
Don R Brown
- Posts: 2965
- Joined: 27 Dec 2011 9:20 am
- Location: Rochester, New York, USA
- State/Province: New York
- Country: United States
-
Lane Gray
- Posts: 13684
- Joined: 4 Aug 1998 11:00 pm
- Location: Topeka, KS
- State/Province: -
- Country: United States
-
Don R Brown
- Posts: 2965
- Joined: 27 Dec 2011 9:20 am
- Location: Rochester, New York, USA
- State/Province: New York
- Country: United States
-
Ian Rae
- Posts: 6182
- Joined: 10 Oct 2013 11:49 am
- Location: Redditch, England
- State/Province: -
- Country: United Kingdom
Jerry, you don't say how long you've been playing. After a few years I am beginning to get some authentic noises out of the thing.
Singers and fiddle players can squeeze up to a note, but we can do it twofold with the bar and the pedals. Experiment with each and then combine them to excruciating effect. When Don says "have fun" he means go way over the top and then retreat to something half-tasteful.
Singers and fiddle players can squeeze up to a note, but we can do it twofold with the bar and the pedals. Experiment with each and then combine them to excruciating effect. When Don says "have fun" he means go way over the top and then retreat to something half-tasteful.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
-
Dale Rivard
- Posts: 416
- Joined: 22 Jan 2006 1:01 am
- Location: Ontario, Canada
- State/Province: -
- Country: United States
-
Brett Day
- Posts: 5451
- Joined: 17 Jun 2000 12:01 am
- Location: Pickens, SC
- State/Province: -
- Country: United States
I can do the crying or whining sound at the twenty-second or twenty-third fret on strings three and five(high strings) and do a little bit of vibrato. I can also do a crying sound on the third high string past the twenty-fourth fret towards the pickup and then, the whining sound can be done near the seventh or eighth frets with the A and B pedals down-sometimes it'll be strings four, five, and six, and moving the bar to the second or third frets while picking strings eight and ten, or sometimes strings eight, nine, and ten
-
Herb Steiner
- Posts: 12636
- Joined: 4 Aug 1998 11:00 pm
- Location: Briarcliff TX 78669, pop. 2,064
- State/Province: -
- Country: United States
Some of y'all are missing the point. It's not done at any specific point on the fretboard, though it requires left hand knowledge of both slow and fast vibrato, rolled more often than sliding, combined with a very subtle volume pedal technique.
The steel "cries" and "whines" because it's imitating the plaintive sound of the human voice, so the guitarist has to replicate the sounds of a singer "crying" or "moaning." When the player internalizes the lyrics and meaning of the song and plays his guitar with the same inflections that a vocalist would do, the crying steel guitar sound will occur naturally.
The technique that is required is to get both hands to control the instrument, just like a singer's technique is to control his voice. This takes some time, but it will come.
The steel "cries" and "whines" because it's imitating the plaintive sound of the human voice, so the guitarist has to replicate the sounds of a singer "crying" or "moaning." When the player internalizes the lyrics and meaning of the song and plays his guitar with the same inflections that a vocalist would do, the crying steel guitar sound will occur naturally.
The technique that is required is to get both hands to control the instrument, just like a singer's technique is to control his voice. This takes some time, but it will come.
My rig: Infinity and Telonics.
Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
-
Ian Rae
- Posts: 6182
- Joined: 10 Oct 2013 11:49 am
- Location: Redditch, England
- State/Province: -
- Country: United Kingdom
Herb has put very well what I failed to say in my post. You need to learn enough control of the instrument to be able to imitate what you hear vocalists (and expressive instruments) doing without analysing it.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
-
Lane Gray
- Posts: 13684
- Joined: 4 Aug 1998 11:00 pm
- Location: Topeka, KS
- State/Province: -
- Country: United States
Well said, Herb.
Jerry, if you can point to some passages where you'll find the variety of cry that moves you, we can tell you where to find the notes, and how to execute it.
But your steel won't cry in your hands until the following stuff happens in your learning:
1) You learn where to find the notes in your head without thinking about where they are. Practice those stupid frustrating harmonized scales.
2) you can play passages you like with feeling: the good ones among us are actors without words.
3) you can heat stuff in your head and then play it with feeling.
We can help you with shortcuts, but in the words of the Osborne Brothers, they're only stepping stones. Fortunately most of us enjoy laying stepping stones. We'll try to help
Jerry, if you can point to some passages where you'll find the variety of cry that moves you, we can tell you where to find the notes, and how to execute it.
But your steel won't cry in your hands until the following stuff happens in your learning:
1) You learn where to find the notes in your head without thinking about where they are. Practice those stupid frustrating harmonized scales.
2) you can play passages you like with feeling: the good ones among us are actors without words.
3) you can heat stuff in your head and then play it with feeling.
We can help you with shortcuts, but in the words of the Osborne Brothers, they're only stepping stones. Fortunately most of us enjoy laying stepping stones. We'll try to help
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
More amps than guitars, and not many effects
-
Steve Hinson
- Posts: 3988
- Joined: 4 Aug 1998 11:00 pm
- Location: Hendersonville Tn USA
- State/Province: Tennessee
- Country: United States
...do this...
Get some Conway Twitty records...whatever that guy did...do that.
You'll never sound just like him(nobody ever has)...
A great place to start,though...
Steve
Brand X
You'll never sound just like him(nobody ever has)...
A great place to start,though...
Steve
Brand X
-
Jerry Recktenwald
- Posts: 175
- Joined: 22 May 2011 8:52 pm
- Location: Louisville KY
- State/Province: -
- Country: United States
Well first I have the Mel Bay DVD for pedal steel. My problem O play regular guitar and know where my notes are form the first fret all the way up the neck.I play lead and like to play back up while some one sings.Now I need to know my notes on all of the strings so that I can play lead and fill in using the steel.I have been playing some what by ear but also using my knowledge of scales key;s. Where can I find the scale in E major something that I can print out not a video. so that I can look at put it together in my mind and understand. Then apply to all of the other key's In our band they say Jerry doesn't need the music just tell him what key it's in . But of course I have had my PSG sense this past Christmas I'll get just like I got the C6 lap steel. Lance the songs that I had in mind are Please release me After all this time Crazy Willie Nelson Your cheated heart I don't know if it's problem I believe that I trying to play the steel [ lead] like I play the regular guitar. Oh Lance where can I print out the harmony scales? Once again I want to thank everyone for your help!
-
Jerry Recktenwald
- Posts: 175
- Joined: 22 May 2011 8:52 pm
- Location: Louisville KY
- State/Province: -
- Country: United States
-
Jerry Recktenwald
- Posts: 175
- Joined: 22 May 2011 8:52 pm
- Location: Louisville KY
- State/Province: -
- Country: United States
https://www.youtube.com/watch?v=DAOGFMAIglo forgot to past!
-
Lane Gray
- Posts: 13684
- Joined: 4 Aug 1998 11:00 pm
- Location: Topeka, KS
- State/Province: -
- Country: United States
-
Jim Fogarty
- Posts: 1577
- Joined: 14 Dec 1999 1:01 am
- Location: Phila, Pa, USA
- State/Province: -
- Country: United States
-
Mike Perlowin RIP
- Posts: 15171
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA
- State/Province: -
- Country: United States
I'm not sure how to make a steel guitar wine, but I don't think this is the right way.
https://www.youtube.com/watch?v=fUxjOS3g6Uc
https://www.youtube.com/watch?v=fUxjOS3g6Uc
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
-
Mitch Ellis
- Posts: 715
- Joined: 22 May 2006 12:01 am
- Location: Collins, Mississippi USA
- State/Province: Mississippi
- Country: United States
Re: ...do this...
Good advice. When I read the topic of this thread, "that guy" is the ONLY steel player that came to mind. I think the plaque reads something like " The undisputed master of bar shiver and high registry intonation." The great John Hughey. So...yes. Whatever that guy did, do that.Steve Hinson wrote:Get some Conway Twitty records...whatever that guy did...do that.
You'll never sound just like him(nobody ever has)...
A great place to start,though...
Steve
Brand X
Mitch
-
Rich Upright
- Posts: 1189
- Joined: 30 Sep 2014 9:55 am
- Location: Florida, USA
- State/Province: Florida
- Country: United States
-
Bill Miller
- Posts: 1436
- Joined: 19 Mar 2003 1:01 am
- Location: Gaspe, Quebec, Canada
- State/Province: -
- Country: United States
John Hughey and Dickey Overbey are fine examples of injecting a lot of emotion into your playing. Both were masters.
I find volume pedal technique is a really big part of getting that moaning or whining sound. Pick hard with the volume off and as the strings are sustaining squeeze the volume on and off gently to milk out the sound you hear in your head.
I like the moaning sound you can get in the lower register just as well as the crying sound produced way up the neck.
I find volume pedal technique is a really big part of getting that moaning or whining sound. Pick hard with the volume off and as the strings are sustaining squeeze the volume on and off gently to milk out the sound you hear in your head.
I like the moaning sound you can get in the lower register just as well as the crying sound produced way up the neck.