TN Tri Cities Steel Guitar Jam Nov 10/Edited for new venue
Moderator: Dave Mudgett
-
Pete Taylor
- Posts: 41
- Joined: 14 May 2007 12:02 pm
- Location: Elizabethton, Tennessee, USA
- State/Province: Tennessee
- Country: United States
Hey guys, I just found out that Larry Miller fell from a ladder and broke his back and foot. Larry came to the last two jams with his wife just to listen but was looking forward to the next to bring his steel to play. Larry is a great craftsman building his own cases and seats.He will be in rehab for several weeks.Please remember him in your prayers as he is a good man in a need of our prayers for his recovery. Thanks guys see you soon.
-
Tony Dingus
- Posts: 3744
- Joined: 24 May 2002 12:01 am
- Location: Kingsport, Tennessee, USA
- State/Province: Tennessee
- Country: United States
-
Tony Dingus
- Posts: 3744
- Joined: 24 May 2002 12:01 am
- Location: Kingsport, Tennessee, USA
- State/Province: Tennessee
- Country: United States
-
Tony Dingus
- Posts: 3744
- Joined: 24 May 2002 12:01 am
- Location: Kingsport, Tennessee, USA
- State/Province: Tennessee
- Country: United States
Here's some directions to the VFW. If you're on I-81, take exit 57B to I-26 West/US23 North. Then go around 8 mile, take Exit 1,turn left at the end of ramp. Go around 6 mile, turn left on Silver Lake Rd, go 0.3 mile, turn left on VFW Rd. If you want to use map quest, use this address, 247 Silver Lake Rd Church Hill, Tn. That's the Church Hill Health dept address which is at the corner on VFW Rd. I hope that will help you out. Looking forward to a good day of picking and fellowship. Almost 2 weeks to go.
Tony
Tony
-
Ray Anderson
- Posts: 845
- Joined: 8 Mar 2011 7:58 pm
- Location: Jenkins, Kentucky USA
- State/Province: Kentucky
- Country: United States
-
Mike Archer
- Posts: 6390
- Joined: 2 Apr 2004 1:01 am
- Location: church hill tn
- State/Province: -
- Country: United States
Larry Miller
wow im sorry to hear that Larry Miller had a bad
fall and got hurt
Larry Ill keep you in my prayers buddy get well soon Mike
fall and got hurt
Larry Ill keep you in my prayers buddy get well soon Mike
Mullen g2 d-10
Quilter 112
Tele/ fender deluxe
Quilter 112
Tele/ fender deluxe
-
Fred Nolen
- Posts: 203
- Joined: 1 Jul 2005 12:01 am
- Location: Mohawk, Tennessee, USA
- State/Province: Tennessee
- Country: United States
Address
Hey Tony, I'm gonna try to make this one. Could you get me an address for the Ol' Garmin? I hope to steal some new licks to steel - I'm borin' myself, and my wife, to death with my old ones.
Ol' Fred
Ol' Fred
-
Tony Dingus
- Posts: 3744
- Joined: 24 May 2002 12:01 am
- Location: Kingsport, Tennessee, USA
- State/Province: Tennessee
- Country: United States
-
Tony Dingus
- Posts: 3744
- Joined: 24 May 2002 12:01 am
- Location: Kingsport, Tennessee, USA
- State/Province: Tennessee
- Country: United States
-
Tony Dingus
- Posts: 3744
- Joined: 24 May 2002 12:01 am
- Location: Kingsport, Tennessee, USA
- State/Province: Tennessee
- Country: United States
-
Tony Dingus
- Posts: 3744
- Joined: 24 May 2002 12:01 am
- Location: Kingsport, Tennessee, USA
- State/Province: Tennessee
- Country: United States
-
Landon Roberson
- Posts: 238
- Joined: 15 Jan 2011 8:50 am
- Location: Church Hill, Tennessee, USA
- State/Province: Tennessee
- Country: United States
-
Sam White R.I.P.
- Posts: 6039
- Joined: 20 Apr 2001 12:01 am
- Location: Coventry, RI 02816
- State/Province: -
- Country: United States
I won't be making it this time Tony & Mike can't afford the Gasoline.Things are kind of tight right now.
Sam White
Sam White
Dynalap lap 8 String Lap Steel Fender frontman 25B speaker changed Boss TU-12H Tuner.Founder and supporter of the Rhode Island Steel Guitar Association Founder of the New England Steel Guitar Association and the Greeneville TN Steel Jams and now founder of the North Carolina Steel Guitar Jams. Honorary member of the Rhode Island Steel Guitar Association,Member of The New England Steel Guitar Association.
Member of the Florida Steel Guitar Club,and member of Mid Atlantic Steel Guitar Association
Member of the Florida Steel Guitar Club,and member of Mid Atlantic Steel Guitar Association
-
Tony Dingus
- Posts: 3744
- Joined: 24 May 2002 12:01 am
- Location: Kingsport, Tennessee, USA
- State/Province: Tennessee
- Country: United States
-
Mike Archer
- Posts: 6390
- Joined: 2 Apr 2004 1:01 am
- Location: church hill tn
- State/Province: -
- Country: United States
the jam
we understand Sam you will be missed
bro....times are tough right now
I hope they get better for us all
Tony is there going to be a band this time you think?
im gettin my tracks together just in case not
looking forward to it guys!!!
Mike
bro....times are tough right now
I hope they get better for us all
Tony is there going to be a band this time you think?
im gettin my tracks together just in case not
looking forward to it guys!!!
Mike
Mullen g2 d-10
Quilter 112
Tele/ fender deluxe
Quilter 112
Tele/ fender deluxe
-
Tom Keller
- Posts: 680
- Joined: 13 Nov 2001 1:01 am
- Location: Greeneville, TN, USA
- State/Province: Tennessee
- Country: United States
-
Tony Dingus
- Posts: 3744
- Joined: 24 May 2002 12:01 am
- Location: Kingsport, Tennessee, USA
- State/Province: Tennessee
- Country: United States
-
Steve Leonard
- Posts: 499
- Joined: 27 Feb 2001 1:01 am
- Location: Bristol,VA.,U.S.A
- State/Province: -
- Country: United States
-
Kermit Monk
- Posts: 136
- Joined: 18 Apr 2011 12:46 pm
- Location: Greeneville, TN
- State/Province: Tennessee
- Country: United States
Mike....You asked if there was going to be a band this time....I am bringing my tele. Tony asked Pop Turner to play drums and I think he was going to ask Danny Fields about playing bass. Gary Skelton is bringing a PA...Don't know if we consider that a band, but there will be some backup noise anyway
I am leaving my steel at home this time.(I can hear a big sigh of relief coming through the computer)
.... Dave and I have a show Sat. night and my car will be full with PA equipment.
I am leaving my steel at home this time.(I can hear a big sigh of relief coming through the computer)
mudstand.com
ZB Custom SD-11 (4 & 7)
Mullen SD-11 (4 & 7)
ZB Custom SD-11 (4 & 7)
Mullen SD-11 (4 & 7)
-
Tony Dingus
- Posts: 3744
- Joined: 24 May 2002 12:01 am
- Location: Kingsport, Tennessee, USA
- State/Province: Tennessee
- Country: United States
-
Mike Archer
- Posts: 6390
- Joined: 2 Apr 2004 1:01 am
- Location: church hill tn
- State/Province: -
- Country: United States
band
hey Kermit I would say thats a great band bro
is Dave coming to the jam?
by the way Tony the question was asked me
whats the cost to get in the jam this time?
forgot to ask sooner
see yall there Mike
is Dave coming to the jam?
by the way Tony the question was asked me
whats the cost to get in the jam this time?
forgot to ask sooner
see yall there Mike
Mullen g2 d-10
Quilter 112
Tele/ fender deluxe
Quilter 112
Tele/ fender deluxe
-
Kermit Monk
- Posts: 136
- Joined: 18 Apr 2011 12:46 pm
- Location: Greeneville, TN
- State/Province: Tennessee
- Country: United States
Dave is coming, but he said it would be after lunch and he may not even set his steel up.
Years ago, the machine shop I worked for hired a new guy. He clocked in wearing a big field jacket. All day long he didn't even do enough work to take off his heavy jacket. At the end of the day the shop foreman said "You didn't do much work today.." The guy responded "I was saving myself in case you asked me to work overtime."
Dave is saving himself for overtime....
I think with the appropriate amount of arm twisting we can get him to setup that ol cheap John Hughey steel.
Years ago, the machine shop I worked for hired a new guy. He clocked in wearing a big field jacket. All day long he didn't even do enough work to take off his heavy jacket. At the end of the day the shop foreman said "You didn't do much work today.." The guy responded "I was saving myself in case you asked me to work overtime."
Dave is saving himself for overtime....
I think with the appropriate amount of arm twisting we can get him to setup that ol cheap John Hughey steel.
mudstand.com
ZB Custom SD-11 (4 & 7)
Mullen SD-11 (4 & 7)
ZB Custom SD-11 (4 & 7)
Mullen SD-11 (4 & 7)
-
Mike Archer
- Posts: 6390
- Joined: 2 Apr 2004 1:01 am
- Location: church hill tn
- State/Province: -
- Country: United States
well I never.....
Daves like me hes a little hard to get going but always comes through hehehehe
im to old to cut the mustard but I still like to mess around them patches....
well I cant bend anymore but I can
always look..... Mike
im to old to cut the mustard but I still like to mess around them patches....
well I cant bend anymore but I can
always look..... Mike
Mullen g2 d-10
Quilter 112
Tele/ fender deluxe
Quilter 112
Tele/ fender deluxe
-
David Martin
- Posts: 252
- Joined: 11 Sep 2000 12:01 am
- Location: Kingsport, TN 37660 USA
- State/Province: -
- Country: United States
Steel Jam
Hey guys, I really appreciate you opening for me. You may want to put a couple of extra men in the parking lot for crowd control. I WILL be there - have the crowd warmed up and the Lone Star cold.
-
Tony Dingus
- Posts: 3744
- Joined: 24 May 2002 12:01 am
- Location: Kingsport, Tennessee, USA
- State/Province: Tennessee
- Country: United States