file system error 608

Joe Delaronde · Post by **Joe Delaronde** » 26 Jul 2002 7:27 am

I get the "file system error 608" every now and again. I have to re-boot to restore the CD program which recognizes that there is a Cd in the drive. What gives. It's annoying as H***!
Thanks in advance.
Joe

Jim Smith · Post by **Jim Smith** » 26 Jul 2002 7:33 am

I found only a few references to your problem on Usenet. The only suggestions offered were: <BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR><SMALL>3 things to try.

1) Boot into Safe Mode
Open Device Manager
Remove all CDROM devices
Reboot.

2) Check the CDROM maker's web site for firmware update for your model.

3) Open "My Computer"
Right click on your CDROM drive
click "Eject"</SMALL><HR></BLOCKQUOTE>

Joe Delaronde · Post by **Joe Delaronde** » 26 Jul 2002 8:16 am

We'll try 'em all!
Thanks, Jim

Joe

Wayne Brown · Post by **Wayne Brown** » 27 Jul 2002 3:06 am

hey joe i'll get lori to look into it for you today ok
later bud

wayne

Mark Ardito · Post by **Mark Ardito** » 27 Jul 2002 6:08 am

Joe,

I would go into Device Manager and remove your CD-ROM from the list. Then reboot. Windows will recognize a new device (your cd-rom which you just removed) and it will install the drivers again. I would try that first. Post back here if it didnt work.

Mark