Wiring pickup to 3 way switch

Bobby Harris · Post by **Bobby Harris** » 8 Feb 2022 1:46 am

Could anybody help me on wiring up a pickup on a 3 way switch this pickup up was in my rustler steel it was hooked up to a 3 way switch it worked fine it worked like a 3 way switch on a telecaster I put a new pickup in it I didn’t diagram the wires before I cut them I can’t get it wired back up right it has 4 wires one is a brown wire I know it is a ground the other wires is. Green yellow and blue any info would be apprieated thanks so much

John Sims · Post by **John Sims** » 10 Feb 2022 9:09 am

Will this help? I will also PM you some PDF files with different switch configs

D Schubert · Post by **D Schubert** » 10 Feb 2022 10:22 am

It would be helpful if you could share, what were the three functions or settings when the switch was working?

Jeff Highland · Post by **Jeff Highland** » 10 Feb 2022 2:58 pm

Unfortunately wire colors are not standardised between manufacturers, You need to specify the brand of pickup