Tried adjusting the height on my Dekley D-10
and found that the pickup won't raise when the screws are turned counter-clockwise. Any
of you ever experince this with a Dekley? Need to know where i might find those springs. The pickup ont E-9 is farther away form the strings than the C neck and i'd like to have them equidistance if possible.
Thanks TJH
Dekley Pickup Adjustment Springs
Moderator: Dave Mudgett
-
thurlon hopper
- Posts: 432
- Joined: 15 Apr 2000 12:01 am
- Location: Elizabethtown Pa. USA
- State/Province: -
- Country: United States
-
Dan Beller-McKenna
- Posts: 3221
- Joined: 3 Apr 2005 1:01 am
- Location: Durham, New Hampshire, USA
- State/Province: New Hampshire
- Country: United States
Hi Thurlon,
when I acquired my Dekley S-10 last spring, I found that the springs under the pickup were pretty well shot. I went to the hardware store, bought a variety of springs most closely matching the thickness of the ones that came with the guitar, and tried a couple until I found one with the propper tension. A bit oif a hassle moving the rods out of the way but otherwise a fairly simple operation: even I didn't botch it.
Dan
when I acquired my Dekley S-10 last spring, I found that the springs under the pickup were pretty well shot. I went to the hardware store, bought a variety of springs most closely matching the thickness of the ones that came with the guitar, and tried a couple until I found one with the propper tension. A bit oif a hassle moving the rods out of the way but otherwise a fairly simple operation: even I didn't botch it.
Dan