Sho Bud Volume Pedal Question

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Dave Mudgett

Guest

Sho Bud Volume Pedal Question

Post by Guest »

I have an old Sho Bud volume pedal and a new Goodrich pedal. The Goodrich pedal does not modify the tone of the steel guitar at all, but the Sho Bud pedal has a big impact on the tone -- it seems to flatten the highs quite a bit. Is this common to Sho Bud pedals or is it just mine?
User avatar
Jackie Anderson
Posts: 520
Joined: 17 Jun 2002 12:01 am
Location: Scarborough, ME
State/Province: -
Country: United States

Post by Jackie Anderson »

That seems to be common to "pot" pedals in general (you will probably get an explanation for it in "Electronics" after this gets moved there). Adding a Matchbox, Little Izzy, MicroAmp or any of a number of other devices between steel and volume pedal pretty much eliminates the problem.
Guest

Post by Guest »

But, the Goodrich is a pot pedal, isn't it? And my Sho Bud pedal really changes the tone a lot, not just slightly.
Chick Donner
Posts: 707
Joined: 4 Aug 1998 11:00 pm
Location: North Ridgeville, OH USA
State/Province: -
Country: United States

Post by Chick Donner »

That problem can be fixed with the addition of the "Myrick" mod.
User avatar
Jim Smith
Posts: 7949
Joined: 4 Aug 1998 11:00 pm
Location: Midlothian, TX, USA
State/Province: -
Country: United States

Post by Jim Smith »

Try plugging into the Sho-Bud pedal in reverse - in at the back and out at the front. Maybe someone wired the pot backwards. If this fixes it, swap those wires at the pot, or just remember to always plug in that way. A pot is a pot and shouldn't make the drastic difference you're describing.
User avatar
Erv Niehaus
Posts: 27213
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA
State/Province: -
Country: United States

Post by Erv Niehaus »

I've got Goodrich, Emmons & Sho~Bud volume pedals and I can't tell a lick of difference between any of them.
Erv
User avatar
Jackie Anderson
Posts: 520
Joined: 17 Jun 2002 12:01 am
Location: Scarborough, ME
State/Province: -
Country: United States

Post by Jackie Anderson »

Some of the oldest and, I believe, the newest Goodrich pedals are not actually pot pedals. In between they made a model which used a pot but also a preamp that reportedly eliminated the tone change problem. It's also possible that someone wired the pot in your Sho-Bud pedal so that it makes the problem worse, but the "correct" wiring is still going to tend to cause that tone change, without a preamp or other active circuit between the pickup and the pedal. Again, there are a number of devices to choose from, and those Sho-Bud pedals sure are handsome, aren't they?