Patch Cords-any suggestions
Moderator: Dave Mudgett
-
Craig Villalon
- Posts: 72
- Joined: 22 Jul 1999 12:01 am
- Location: Charlottesville Va.
- State/Province: -
- Country: United States
Patch Cords-any suggestions
I have been using five patch cords in my setup with my derby and nashville 1000. It has been suggested that I consider using a good quality cable...I have been using guitar patch cords purchased at a local guitar shop...any recommendations?
I have noticed that some people use a really thin guage cord and others seem to be using the regular guitar type chord...any opionions on this equipment? Should i get custom cables cut to precise lenths..i know that i should not have a lot of extra cable in the loop and i have plenty.
Craig
I have noticed that some people use a really thin guage cord and others seem to be using the regular guitar type chord...any opionions on this equipment? Should i get custom cables cut to precise lenths..i know that i should not have a lot of extra cable in the loop and i have plenty.
Craig
-
VERNON PRIDDY
- Posts: 301
- Joined: 4 Apr 2000 12:01 am
- Location: ELIZABETHTOWN; KY. USA
- State/Province: -
- Country: United States
-
Jon Light (deceased)
- Posts: 14336
- Joined: 4 Aug 1998 11:00 pm
- Location: Saugerties, NY
- State/Province: -
- Country: United States
Craig---get yourself a nice length of GeorgeL cable and as many plugs as you need. Make the cables yourself. I do not exaggerate when I say that all you do is cut the wire to length, stick it in the back of the plug and tighten a screw. Done. This is the thin wire you have seen. It doesn't lay as nice as more pliable cords but it works great, holds up just fine, sounds excellent, can be made precisely to your needs, and is sort of the steel industry standard. Any one of our steel accessory dealers sells the wire by the foot.
-
chas smith R.I.P.
- Posts: 5043
- Joined: 28 Feb 2001 1:01 am
- Location: Encino, CA, USA
- State/Province: -
- Country: United States
-
KENNY KRUPNICK
- Posts: 3622
- Joined: 16 Jul 2000 12:01 am
- Location: Columbus, Ohio
- State/Province: Ohio
- Country: United States
-
Ron Randall
- Posts: 2179
- Joined: 13 Jan 2002 1:01 am
- Location: Dallas, Texas, USA
- State/Province: Texas
- Country: United States
-
Emmett Roch
- Posts: 547
- Joined: 3 Jun 2000 12:01 am
- Location: Texas Hill Country
- State/Province: Texas
- Country: United States
-
Bobby Bowman
- Posts: 2304
- Joined: 30 Dec 1999 1:01 am
- Location: Cypress, Texas, USA, R.I.P.
- State/Province: -
- Country: United States
-
Eric West
- Posts: 5747
- Joined: 25 Apr 2002 12:01 am
- Location: Portland, Oregon, USA, R.I.P.
- State/Province: -
- Country: United States
No doubt about it, the thin "George L" type.
I get mine from Sierra here in Portland.
Get a 30 footer for long runs a couple 10's a couple 6's and a couple 3's. The 90 degree fittings work a good as the straight ones. A bit of fingernail polish keeps the ends from unscrewing on the 90 deg fittings.
I've been questioned for years on the merits of the thin cable, and once in the studio we tested several different ones for "noise" and buzz receptivity. The thin ones beat the others hands down. I'm told that it's from less suare inch area of "shielding" which tends to pick up interference. I dunno, but I know they are quieter than any thick ones I've tested.
I know they're the best. You can fix them in a minute, and you know that you can trust them.
EJL
I get mine from Sierra here in Portland.
Get a 30 footer for long runs a couple 10's a couple 6's and a couple 3's. The 90 degree fittings work a good as the straight ones. A bit of fingernail polish keeps the ends from unscrewing on the 90 deg fittings.
I've been questioned for years on the merits of the thin cable, and once in the studio we tested several different ones for "noise" and buzz receptivity. The thin ones beat the others hands down. I'm told that it's from less suare inch area of "shielding" which tends to pick up interference. I dunno, but I know they are quieter than any thick ones I've tested.
I know they're the best. You can fix them in a minute, and you know that you can trust them.
EJL
-
James Winwood
- Posts: 161
- Joined: 29 Oct 2000 12:01 am
- Location: New York, New York
- State/Province: New York
- Country: United States
I've tried many cables- standard, monster george l's. I wholeheartedly recommend Two-Rock guitar cables. Nothing comes close to my ear. They are pricey...but they are like taking a bunch of invisible wet blankets off your amplifier. I have recently gone to an all Two-Rock rig. It's ecstaticly satisfying to say the least.
-
Craig Villalon
- Posts: 72
- Joined: 22 Jul 1999 12:01 am
- Location: Charlottesville Va.
- State/Province: -
- Country: United States
-
b0b
- Posts: 29079
- Joined: 4 Aug 1998 11:00 pm
- Location: Cloverdale, CA, USA
- State/Province: -
- Country: United States
