Rosin For Volume Pedal?

Bruce Etter · Post by **Bruce Etter** » 30 Nov 2002 6:36 pm

I recently replaced a volume pot, along with a new string. Someone told me about a rosin product to use to improve the grip of the nylon cord (to prevent slippage). I think that they called the product "Rosinette". Does this sound familiar to anyone? I was told I could probably buy it at Radio Shack. The clerk at Radio Shack had never heard of it. If someone could help me with what product to use, I would really appreciate it!

------------------
1975 Emmons D-10 Push/Pull

Eric West · Post by **Eric West** » 30 Nov 2002 8:58 pm

If you are using an Ernie Ball, Here's what I did with mine to stop that problem.

I replaced the set screw with a round headed screw, partially ground for extra clearance but not too much to interfere with the slot, wrapped a nylon bootlace around the pulley and took a wrap on the screw. threaded it through the eyes and melted a knot on each end. It's worked for over 18 years like that.

I also ditched the "tone pot". AB EJ Extra life pots last between 3 and 5 years. No noise.

Glenn Austin · Post by **Glenn Austin** » 30 Nov 2002 11:48 pm

You can buy Rosinite spray on the Emmons website.

Bruce Etter · Post by **Bruce Etter** » 1 Dec 2002 5:11 am

Thanks for your help! I just ordered the rosinite from the Emmons website.

------------------
1975 Emmons D-10 Push/Pull

Donny Hinson · Post by **Donny Hinson** » 1 Dec 2002 7:35 am

I have always wax coated the strings by "sawing" them through a candle. It cuts down slippage and fraying, and doubles or triples the life of the string.