Lace Alumatone - Help

Niels Andrews · Post by **Niels Andrews** » 13 Oct 2012 4:25 am

I started working on one of my guitars this morning. One thing was change the pick up. I see my supersustain has two wires and my Alumatone has four, anybody have any ideas?
Thanks,
Niels

Stephen Cowell · Post by **Stephen Cowell** » 13 Oct 2012 4:48 am

http://www.lacemusic.com/pdf/13.pdf

Jon Light (deceased) · Post by **Jon Light (deceased)** » 13 Oct 2012 4:53 am

My Alumitones only have 2 leads but via a quick search---if you are looking at 1 white, 1 green and 2 orange wires, tie the white & green together to ground, tie the 2 oranges together to hot.
If that's not what you've got, what have you got?

http://www.lacemusic.com/pdf/12.pdf

Niels Andrews · Post by **Niels Andrews** » 13 Oct 2012 4:58 am

You guys are what make this forum so great. I have the information I need to proceed. Better than Google, our own ask the expert.
Thanks

Ken Metcalf · Post by **Ken Metcalf** » 13 Oct 2012 5:15 am

The old Alumatones are 3 wire and the newer ones have a coil tap type thing... 4 wires

Niels Andrews · Post by **Niels Andrews** » 21 Oct 2012 4:13 pm

Finished with install. Happy all the way around.