Anapeg Guitars
Moderator: Dave Mudgett
-
Matt Chase
- Posts: 73
- Joined: 17 Jan 2007 5:22 pm
- Location: Queensland, Australia
Anapeg Guitars
Through all of my lurking on this forum, I keep reading the name 'Anapeg', and the awe it seems to inspire in steel players.
Then I read somewhere that they were made in Australia, and thought: "That's odd!"
Then I read in a post that they were made in Brisbane (where I live) and thought: "That's very odd!"
Then I looked up the Anapeg address on a map, and bugger me if it isn't on my side of town and about 50 metres from a good friend's house. I've driven past it hundreds of times oblivious to the magic at work inside.
With the pedal steel industry being so USA-centric, this is very strange. It would be like you guys finding out that Steve Irwin grew up in Nashville, or that Vegemite (vile stuff that it is) is made in Wisconsin.
I'm immensely proud of my fellow Brisbane-ite, and I hope one day to be good enough (and patient enough, and rich enough!) to buy one of his guitars.
Matt
Then I read somewhere that they were made in Australia, and thought: "That's odd!"
Then I read in a post that they were made in Brisbane (where I live) and thought: "That's very odd!"
Then I looked up the Anapeg address on a map, and bugger me if it isn't on my side of town and about 50 metres from a good friend's house. I've driven past it hundreds of times oblivious to the magic at work inside.
With the pedal steel industry being so USA-centric, this is very strange. It would be like you guys finding out that Steve Irwin grew up in Nashville, or that Vegemite (vile stuff that it is) is made in Wisconsin.
I'm immensely proud of my fellow Brisbane-ite, and I hope one day to be good enough (and patient enough, and rich enough!) to buy one of his guitars.
Matt
-
Jim Cohen
- Posts: 21844
- Joined: 18 Nov 1999 1:01 am
- Location: Philadelphia, PA
-
Paddy Long
- Posts: 5554
- Joined: 19 Aug 2003 12:01 am
- Location: Christchurch, New Zealand
-
Frederic Mabrut
- Posts: 424
- Joined: 7 Jun 2006 12:01 am
- Location: Olloix, France
I've recently seen in a post by Peter Johanisse from the French Forum a video of Tom Brumley playing one of these famous steel guitars.
Here is the link to the video:
http://www.youtube.com/watch?v=Nv7ZNVNkFPw
Fred
Here is the link to the video:
http://www.youtube.com/watch?v=Nv7ZNVNkFPw
Fred
-
Stu Schulman
- Posts: 6523
- Joined: 15 Oct 1998 12:01 am
- Location: Ulster Park New Yawk (deceased)
Matt..Yes take some photos and post them..Stu
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
-
Matt Chase
- Posts: 73
- Joined: 17 Jan 2007 5:22 pm
- Location: Queensland, Australia
Because I'm completely new to the instrument, I might wait until I at least know the names of all the parts and have a bit of an idea about how the mechanism works.
I can just picture it:
Me (snapping photos furiously): "Wow, great guitar Noel"
Noel: "Actually, that's my Triton router bench. The guitars are over here..."
I can just picture it:
Me (snapping photos furiously): "Wow, great guitar Noel"
Noel: "Actually, that's my Triton router bench. The guitars are over here..."
-
Jeremy Threlfall
- Posts: 1386
- Joined: 3 Aug 2006 12:01 am
- Location: now in Western Australia
-
A. J. Schobert
- Posts: 1172
- Joined: 13 Mar 2006 1:01 am
- Location: Cincinnati, Ohio,
-
A. J. Schobert
- Posts: 1172
- Joined: 13 Mar 2006 1:01 am
- Location: Cincinnati, Ohio,
-
Jeremy Threlfall
- Posts: 1386
- Joined: 3 Aug 2006 12:01 am
- Location: now in Western Australia
-
Matt Chase
- Posts: 73
- Joined: 17 Jan 2007 5:22 pm
- Location: Queensland, Australia
-
Ivan Posa
- Posts: 560
- Joined: 25 Nov 2002 1:01 am
- Location: Hamilton, New Zealand
Matt, go and see Noel, he is top shelf and will make you welcome. I have just had a call from him and my "Peggy" is being shipped to me this next Monday. It has been over 5 years in the making but Noel wouldnt let her go until he was 100 per cent happy. It is an extended E9 tuning with plenty of pulls and the RKL had some leveage issues Noel wasnt happy with, but these have been resolved. I will post pics and tuning info once I have posession of this magnificent instrument. I will be at the Brissy convention this year as will my buddy Paddy Long. Do make the effort to be there as it is a lot of fun to catch up with many good pals who all love Steel Guitar.
-
Matt Chase
- Posts: 73
- Joined: 17 Jan 2007 5:22 pm
- Location: Queensland, Australia
-
Darvin Willhoite
- Posts: 5783
- Joined: 4 Aug 1998 11:00 pm
- Location: Roxton, Tx. USA
I tried some of that Vegamite when I was in OZ too, and I agree. YECHHH. Almost as bad, is an Aussie burger with "the lot", which includes beetroot, and a fried egg. I never could get used to that. But, I got hooked on those Cadbury's white chocolate candy bars, I haven't found them anywhere else in the world.
Last edited by Darvin Willhoite on 2 Feb 2007 6:55 am, edited 1 time in total.
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro.
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro.
-
Roger Rettig
- Posts: 11162
- Joined: 4 Aug 2000 12:01 am
- Location: Naples, FL
Vegemite is, as you say, pretty nasty stuff...
Marmite, however, is nectar for the Gods!
Vegemite is a poor attempt at recreating Marmite's epicurean perfection. As an Englishman exiled to Florida, I'm constantly pleading with my friends that one pound jars of this vital foodstuff be dispatched to me from the Old Country.
Marmite belongs alongside John Betjeman, Morris Minors, Vincent motorcycles and the 'RT' bus as a landmark in British life and culture!
RR
(Edited to replace 'Routemaster' ('RM') with a TRULY iconic London double-decker - the AEC 'RT'.....)
Marmite, however, is nectar for the Gods!
Vegemite is a poor attempt at recreating Marmite's epicurean perfection. As an Englishman exiled to Florida, I'm constantly pleading with my friends that one pound jars of this vital foodstuff be dispatched to me from the Old Country.
Marmite belongs alongside John Betjeman, Morris Minors, Vincent motorcycles and the 'RT' bus as a landmark in British life and culture!
RR
(Edited to replace 'Routemaster' ('RM') with a TRULY iconic London double-decker - the AEC 'RT'.....)
Last edited by Roger Rettig on 2 Feb 2007 5:40 am, edited 1 time in total.
-
Jim Cohen
- Posts: 21844
- Joined: 18 Nov 1999 1:01 am
- Location: Philadelphia, PA
-
Matt Chase
- Posts: 73
- Joined: 17 Jan 2007 5:22 pm
- Location: Queensland, Australia
From all accounts, Vegemite began life in the early 20th century as the black ooze left over from brewing beer. Humans had been brewing beer for thousands of years before that. I think it says something that none of them decided to eat the stuff.
About the Aussie burger, unfortunately that is real (unlike most other goods labelled 'Aussie' in the US). As a beetroot hater, I still get caught out in roadside cafes. I've had to dissect many burgers to remove beetroot slices and squeeze the pink juice out of the bread.
About the Aussie burger, unfortunately that is real (unlike most other goods labelled 'Aussie' in the US). As a beetroot hater, I still get caught out in roadside cafes. I've had to dissect many burgers to remove beetroot slices and squeeze the pink juice out of the bread.
-
Paddy Long
- Posts: 5554
- Joined: 19 Aug 2003 12:01 am
- Location: Christchurch, New Zealand
The secret to Vegemite is not to spread it on too thick !@ Anyone who can stomach peanut butter should love Vegemite...I have it on my toast for breakfast every morning -- I feel it makes my fast licks faster, and my Black Zum sound even smoother!
And as for the Aussie/Kiwi burger -- they are a quantum leap ahead of those piles of paper mache' McDungalds make !! A real burger has got egg, bacon, pineapple, beetroot and lettuce as well as real beef ! :-}
And as for the Aussie/Kiwi burger -- they are a quantum leap ahead of those piles of paper mache' McDungalds make !! A real burger has got egg, bacon, pineapple, beetroot and lettuce as well as real beef ! :-}
-
Stu Schulman
- Posts: 6523
- Joined: 15 Oct 1998 12:01 am
- Location: Ulster Park New Yawk (deceased)
Tell me about "Bay Bugs"...Stu
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
-
Ken Byng
- Posts: 4329
- Joined: 19 Feb 2001 1:01 am
- Location: Southampton, England
-
Damien Odell
- Posts: 327
- Joined: 13 Oct 2004 12:01 am
- Location: Springwood, New South Wales, Australia
Another vote for beetroot here.....it's not a burger without a runny egg and beetroot.
I've been waiting nearly 2 years for my new BMI - but that's nothing on the Anapeg waiting list. Like many players I would one day love to buy an Anapeg. I have heard Graham Griffith from Sydney play his and it has a very smooth rich tone.
I've been waiting nearly 2 years for my new BMI - but that's nothing on the Anapeg waiting list. Like many players I would one day love to buy an Anapeg. I have heard Graham Griffith from Sydney play his and it has a very smooth rich tone.
-
Jeremy Threlfall
- Posts: 1386
- Joined: 3 Aug 2006 12:01 am
- Location: now in Western Australia
-
Paul Redmond
- Posts: 1167
- Joined: 3 Apr 2006 12:01 am
- Location: Illinois, USA
Real HAMburgers should be made of HAM. . .the meat of the pig. Grill a lean pork patty over coals of river birch or hickory, lightly toast two thick slices of oatmeal bread or better, sourdough bread. 'Nuke' a 1/4" slice of yellow onion in the microwave and put it right away over the patty. Immediately lay on a thin slice of baby Swiss cheese so it will melt down over the onion. Add cross-cut slices of lettuce, coat the top slice of toast with peppercorn ranch dressing. Wash this down with a cold bottle of Heileman's "Special Export" beer or, better yet, "Point" beer (you guys/gals in WI know what I'm talking about). Want 'fries' with that? Of course! Cut a yellow potato into 'slabs' lengthwise (skin still attached), then slice the slabs into 'steak fries'. Grill over the same coals until browned and tender and dip into hot dog chili instead of catsup. Now THAT'S a HAMburger deLuxe!!! Enjoy!!! It's a little more work than going thru the drive-up window, but well worth the wait!!! And, according to ebb, the Anapeg's are well worth the wait also. Sorry for digressing, b0b. I just had to share this secret with the world!!!
PRR
PRR
-
Roger Rettig
- Posts: 11162
- Joined: 4 Aug 2000 12:01 am
- Location: Naples, FL