MSA serial number question

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Dave Mudgett

Jerry Touval
Posts: 56
Joined: 3 May 2003 12:01 am
Location: Great Falls, Virginia, USA
State/Province: Virginia
Country: United States

MSA serial number question

Post by Jerry Touval »

Would appreciate any help on learning the birthyear of my MSA Classic, serial number 1C957. I got it way back in 2003 from Billy Cooper but intellectual incuriosity kept me from checking out its origin until the pandemic locked me down at home. Thanks for any info you can provide!

Jerry
User avatar
Mike Perlowin RIP
Posts: 15171
Joined: 4 Aug 1998 11:00 pm
Location: Los Angeles CA
State/Province: -
Country: United States

Post by Mike Perlowin RIP »

Can you post some pictures?
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
Jerry Touval
Posts: 56
Joined: 3 May 2003 12:01 am
Location: Great Falls, Virginia, USA
State/Province: Virginia
Country: United States

Post by Jerry Touval »

Here are a few:

Image
Image
Image
Donny Hinson
Posts: 21830
Joined: 16 Feb 1999 1:01 am
Location: Glen Burnie, Md. U.S.A.
State/Province: -
Country: United States

Post by Donny Hinson »

I'd guess it to be a 1974 model. :mrgreen:
User avatar
Mike Perlowin RIP
Posts: 15171
Joined: 4 Aug 1998 11:00 pm
Location: Los Angeles CA
State/Province: -
Country: United States

Post by Mike Perlowin RIP »

It was definitely made between 1970 and 1975.
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
Jerry Touval
Posts: 56
Joined: 3 May 2003 12:01 am
Location: Great Falls, Virginia, USA
State/Province: Virginia
Country: United States

Post by Jerry Touval »

Thanks guys. I was figuring it was early 70's. If there's any info as to the specific year, it would be much appreciated!

Jerry
Donny Hinson
Posts: 21830
Joined: 16 Feb 1999 1:01 am
Location: Glen Burnie, Md. U.S.A.
State/Province: -
Country: United States

Post by Donny Hinson »

Mike Perlowin wrote:It was definitely made between 1970 and 1975.
That's a "Micro" model, and I don't think they were even made in 1970 or 1971.

,
User avatar
Mike Perlowin RIP
Posts: 15171
Joined: 4 Aug 1998 11:00 pm
Location: Los Angeles CA
State/Province: -
Country: United States

Post by Mike Perlowin RIP »

You night be right Donny.

One thing's for certain, those old MSAs have held up well, and are still are still perfectly usable, after 45+ years.
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
Jerry Touval
Posts: 56
Joined: 3 May 2003 12:01 am
Location: Great Falls, Virginia, USA
State/Province: Virginia
Country: United States

Post by Jerry Touval »

Donny – What defines a micro model? I did a Google search and came up empty. How do you identify a micro and what years were they made?

Mike – My MSA is in tip top condition and remains gig worthy despite the pandemic!


Jerry
User avatar
Mike Perlowin RIP
Posts: 15171
Joined: 4 Aug 1998 11:00 pm
Location: Los Angeles CA
State/Province: -
Country: United States

Post by Mike Perlowin RIP »

I could be mistaken, but I believe MSA teamed up with anther company called Micro inc.
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
User avatar
Mike Perlowin RIP
Posts: 15171
Joined: 4 Aug 1998 11:00 pm
Location: Los Angeles CA
State/Province: -
Country: United States

Post by Mike Perlowin RIP »

Jerry that guitar will still be gig-worthy 100 years from now.

If, heaven forbid, there is a nuclear war, the only things that will survive will be those old MSAs and the insects.
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
Bobby D. Jones
Posts: 3312
Joined: 17 May 2010 9:27 am
Location: West Virginia, USA
State/Province: West Virginia
Country: United States

Post by Bobby D. Jones »

I have a MSA Classic White drift wood.S10 4X4 Serial Number 1C2921. I bought it Used in about 1997 or 98. I contacted Mr. Anderson or who got the records of MSA and they sent back, Born July 9th, 1974. Here is a picture of the guitar. Very close relative. 12 flat Key head with 10 tuners installed.
Image

Image
User avatar
Jeff Harbour
Posts: 640
Joined: 27 Mar 2007 8:04 am
Location: Western Ohio, USA
State/Province: Ohio
Country: United States

Post by Jeff Harbour »

Jerry,

You should contact David Wright or Kyle Bennett (of the modern MSA). Last I checked one of those two has all of Maurice's old record books.
Jerry Touval
Posts: 56
Joined: 3 May 2003 12:01 am
Location: Great Falls, Virginia, USA
State/Province: Virginia
Country: United States

Post by Jerry Touval »

Bobby - Nice looking instrument. Your serial number is about 2,000 later than mine, so I'm still figuring on an early 70's birthdate for mine.

Jerry
Jerry Touval
Posts: 56
Joined: 3 May 2003 12:01 am
Location: Great Falls, Virginia, USA
State/Province: Virginia
Country: United States

Post by Jerry Touval »

Jeff – thanks for the info. I had written an email to Kyle a little while back. Hopefully will get a response. In the meantime, I can try contacting David.

Jerry
User avatar
Jerry Overstreet
Posts: 14876
Joined: 11 Jul 2000 12:01 am
Location: Louisville
State/Province: Kentucky
Country: United States

Post by Jerry Overstreet »

Donny knows these older MSA serial numbers pretty well and has been doing a good job of dating MSA guitars around here for several years. I'm willing to bet he's very, very close.
Jerry Touval
Posts: 56
Joined: 3 May 2003 12:01 am
Location: Great Falls, Virginia, USA
State/Province: Virginia
Country: United States

Post by Jerry Touval »

Sounds good to me! Thanks Donny (and thanks Jerry for orienting me).

Jerry
User avatar
Matthew Murdoch
Posts: 23
Joined: 25 Aug 2020 10:56 am
Location: SE Idaho, USA
State/Province: Idaho
Country: United States

Post by Matthew Murdoch »

Yep. Check with Kyle at MSA. He just dated mine 1C6974 as 4/1/1982
1982 MSA green lacquer “Universal” adapted to extended E9
User avatar
David Wright
Posts: 5363
Joined: 4 Aug 1998 11:00 pm
Location: Pilot Point ,Tx USA.
State/Province: -
Country: United States

Post by David Wright »

June 27, 1973
Jerry Touval
Posts: 56
Joined: 3 May 2003 12:01 am
Location: Great Falls, Virginia, USA
State/Province: Virginia
Country: United States

Post by Jerry Touval »

Thanks a million David! Really appreciate the info.

Jerry
Jeffery Mercer
Posts: 522
Joined: 1 Jul 2019 10:00 am
Location: Born in Portsmouth Oh. Dec. 10th 1954 Reside in City of Mentor, in Northeast Oh.
State/Province: -
Country: United States

Need Information on my MSA Pedal Steel ?

Post by Jeffery Mercer »

Image
Image
PLEASE HELP IF YOU CAN…
Would like any information that’s available on my newly acquired MSA Pedal Steel Guitar Please…SERIAL # is SC160
Thanks to all the members of this Wonderful Community!
You all make this Forum the Absolute Very Best Forum on The entire Internet World…in my Opinion!
God Bless Everyone of You!
“Brother Jeff Mercer”
Jeffery S Mercer
Jeffery Mercer
Posts: 522
Joined: 1 Jul 2019 10:00 am
Location: Born in Portsmouth Oh. Dec. 10th 1954 Reside in City of Mentor, in Northeast Oh.
State/Province: -
Country: United States

Ttt

Post by Jeffery Mercer »

TTT
Jeffery S Mercer
User avatar
David Wright
Posts: 5363
Joined: 4 Aug 1998 11:00 pm
Location: Pilot Point ,Tx USA.
State/Province: -
Country: United States

Post by David Wright »

March 1 1974
Jeffery Mercer
Posts: 522
Joined: 1 Jul 2019 10:00 am
Location: Born in Portsmouth Oh. Dec. 10th 1954 Reside in City of Mentor, in Northeast Oh.
State/Province: -
Country: United States

Information

Post by Jeffery Mercer »

Anymore Information on this steel my brother?
Jeffery S Mercer
User avatar
David Wright
Posts: 5363
Joined: 4 Aug 1998 11:00 pm
Location: Pilot Point ,Tx USA.
State/Province: -
Country: United States

Post by David Wright »

That's all we know........