Acoustic Guitar Simulator

Musical topics not directly related to steel guitar

Moderator: Dave Mudgett

Post Reply
User avatar
Lee Baucum
Posts: 10650
Joined: 11 Apr 1999 12:01 am
Location: McAllen, Texas (Extreme South) The Final Frontier

Acoustic Guitar Simulator

Post by Lee Baucum »

A friend of mine injured a couple of fingers on his left hand a few years ago. They are as healed as much as they will; but, it's getting harder and harder for him to play his acoustic guitars.

I'm wondering if maybe he should switch over to a solid body electric guitar, with lighter strings/action, and use an acoustic guitar simulator.

I was just looking at a simulator made by NUX. It is way over complicated for this guy.

Any thoughts?

By the way, this is strictly for chord strumming.

~Lee
User avatar
Lee Baucum
Posts: 10650
Joined: 11 Apr 1999 12:01 am
Location: McAllen, Texas (Extreme South) The Final Frontier

Post by Lee Baucum »

Perhaps there are acoustic/ electric guitars with an electric guitar neck?
User avatar
Mike Auman
Posts: 371
Joined: 16 Apr 2020 8:36 pm
Location: North Texas, USA

Post by Mike Auman »

It's not so much the neck as the action, since acoustic guitars often have higher actions than electrics.
For a left hand injury, there are some possible ways to make his current acoustic guitars easier to fret:

1. Tune down one fret and put a capo on the 1st fret. Some acoustic guitars have an excessively high nut to prevent buzz, requiring more finger strength unless you add a capo.
2. Have a luthier set up the guitar for the lowest possible action, including nut height, saddle height, neck relief, and string gauge.
3. Replace the nut with a Zero Glide nut, which is a zero-fret, giving you the same lower action as a capo. Best done by a luthier for acoustic guitars, there are different models and sizes for different guitar brands. Neck relief may need to be adjusted, but not usually.
Long-time guitar player, currently being schooled by a lap steel.
User avatar
Chris Templeton
Posts: 3096
Joined: 25 Sep 2012 4:20 pm
Location: The Green Mountain State

Post by Chris Templeton »

Nylon string guitar?
Excel 3/4 Pedal With An 8 String Hawaiian Neck, Sierra Tapper (10 string with a raised fretboard to fret with fingers), Single neck Fessenden 3/5
"The Tapper" : https://christophertempleton.bandcamp.c ... the-tapper
Soundcloud Playlist: https://soundcloud.com/bluespruce8:
User avatar
Darvin Willhoite
Posts: 5778
Joined: 4 Aug 1998 11:00 pm
Location: Roxton, Tx. USA

Post by Darvin Willhoite »

I have a Godin Multiac steel string acoustic electric. It has a thin chambered body and plays as good as most electrics. It has a nice acoustic electric sound. They pop up pretty often on Ebay and Reverb.
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro.
User avatar
John Larson
Posts: 632
Joined: 8 Jul 2020 10:00 am
Location: Pennsyltucky, USA

Post by John Larson »

Taylor T5
Rejoice in the Lord, O ye righteous; praise is meet for the upright. Give praise to the Lord with the harp, chant unto Him with the ten-stringed psaltery. Sing unto Him a new song, chant well unto Him with jubilation. For the word of the Lord is true, and all His works are in faithfulness. The Lord loveth mercy and judgement; the earth is full of the mercy of the Lord.
- Psalm 33:1-5
User avatar
Darvin Willhoite
Posts: 5778
Joined: 4 Aug 1998 11:00 pm
Location: Roxton, Tx. USA

Post by Darvin Willhoite »

I’ve had two Taylor T5’s and I never could get an acoustic sound I liked, the Godin gave me that sound right out of the box. I’ve had a couple of Taylor acoustics with the new, three knob preamp (I forget what they call it) and I never cared for them either. I like Taylor’s old Fishman preamp/EQ system much better.
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro.
User avatar
Walter Killam
Posts: 516
Joined: 9 May 2006 12:01 am
Location: Nebraska, USA
Contact:

Try a Zager

Post by Walter Killam »

I love my Zager ZAD50 ez play guitar. It doesn't project like a Martin, but with decent pickup installed all I have to do is turn up the volume.

In addendum, I use a boss acoustic simulator on my pedalboard, in conjunction with splitting the neck coil, and trying to remember to play like an acoustic rhythm guitar it does a passable job, but it's not the same as my Zager, I can tell it's a simulator.

YMMV
Mostly junque with a few knick-knacks that I really can't do without!
Post Reply