Sticky Pick Grip Stuff??
Moderator: Dave Mudgett
-
Bob Snelgrove
- Posts: 3453
- Joined: 4 Aug 1998 11:00 pm
- Location: san jose, ca
- State/Province: California
- Country: United States
Sticky Pick Grip Stuff??
What do you guys use to keep your picks on besides spit?!
bob
bob
-
Tim Russell
- Posts: 958
- Joined: 12 Apr 2015 7:45 am
- Location: Pennsylvania, USA
- State/Province: Pennsylvania
- Country: United States
-
Bob Snelgrove
- Posts: 3453
- Joined: 4 Aug 1998 11:00 pm
- Location: san jose, ca
- State/Province: California
- Country: United States
Lee,Tim Russell wrote:That stuff the ladies use at the bank when counting out money...I don't use it personally, but it looks like it works well for them, and I've seen it mentioned on other guitar forums.
LEE Sortkwik Fingertip Moistener -
My wife has some of that and it actually is worse than nothing!
Thanks anyway
bob
https://www.youtube.com/watch?v=KRwye98siA4
https://www.youtube.com/watch?v=vZlAdlrRYj0
http://www.reverbnation.com/bobsnelgrove
1978 Crawford Emmons P/P
1976 Tommy White P/P
1986 Franklin D-10
https://www.youtube.com/watch?v=vZlAdlrRYj0
http://www.reverbnation.com/bobsnelgrove
1978 Crawford Emmons P/P
1976 Tommy White P/P
1986 Franklin D-10
-
Jeff Metz Jr.
- Posts: 1783
- Joined: 2 Mar 2011 1:46 pm
- Location: York, Pennsylvania, USA
- State/Province: Pennsylvania
- Country: United States
I just consider slipping picks as part of the instrument. I always see picker pushing their picks back on while playing. Otherwise maybe some Gorilla snot?
http://www.musiciansfriend.com/accessor ... Type%5EPLA
http://www.musiciansfriend.com/accessor ... Type%5EPLA
Mullen G2 SD10 , Lil Izzy Buffer, Goodrich 120 volume pedal, Boss DD-7, Peterson Strobo flip, Peavey Nashville 112
-
Lane Gray
- Posts: 13684
- Joined: 4 Aug 1998 11:00 pm
- Location: Topeka, KS
- State/Province: -
- Country: United States
A gentle beneficial tackiness is achieved with a good layer of nail polish, preferably clear (once, at a gig, I borrowed a bright red on break time).
It not only gives a bit of grip, it protects your fingers from the effects of two of the metals in the fingerpicks: the copper turns your fingers green and the zinc dries the skin.
It not only gives a bit of grip, it protects your fingers from the effects of two of the metals in the fingerpicks: the copper turns your fingers green and the zinc dries the skin.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
More amps than guitars, and not many effects
-
Bob Snelgrove
- Posts: 3453
- Joined: 4 Aug 1998 11:00 pm
- Location: san jose, ca
- State/Province: California
- Country: United States
On your nails, picks, or fingers??Lane Gray wrote:A gentle beneficial tackiness is achieved with a good layer of nail polish, preferably clear (once, at a gig, I borrowed a bright red on break time).
It not only gives a bit of grip, it protects your fingers from the effects of two of the metals in the fingerpicks: the copper turns your fingers green and the zinc dries the skin.
bob
-
Bob Moore
- Posts: 455
- Joined: 1 Dec 2006 1:01 am
- Location: N. Rose, New York
- State/Province: New York
- Country: United States
-
Jack Stoner
- Posts: 22147
- Joined: 3 Dec 1999 1:01 am
- Location: Kansas City, MO
- State/Province: Kansas
- Country: United States
I use a product called "Stick N Pik" however the company is no longer around. If you can find some its in a small tube like lip moisturizer and a tube will last a long time (the tube I have is about two years old and still has about 2/3 left). Its non toxic and does not make a mess like Gorilla Snot.
-
Jerry Overstreet
- Posts: 14878
- Joined: 11 Jul 2000 12:01 am
- Location: Louisville
- State/Province: Kentucky
- Country: United States
Pro Grip's Non Slip is less than $4 from elderly.
Gorilla Snot's Pick Honey. Used to be something called PixSTix or something like that too. Most guitar supply stores have some type of grip aid.
If you got a pine tree anywhere around you, harvest some of that tar, but you have to be careful about getting it in places you don't want it. It's free and abundant in most areas.
Gorilla Snot's Pick Honey. Used to be something called PixSTix or something like that too. Most guitar supply stores have some type of grip aid.
If you got a pine tree anywhere around you, harvest some of that tar, but you have to be careful about getting it in places you don't want it. It's free and abundant in most areas.
-
Lane Gray
- Posts: 13684
- Joined: 4 Aug 1998 11:00 pm
- Location: Topeka, KS
- State/Province: -
- Country: United States
On the inside of the fingerpicks. Give them a good thick layer.Bob Snelgrove wrote:On your nails, picks, or fingers??Lane Gray wrote:A gentle beneficial tackiness is achieved with a good layer of nail polish, preferably clear (once, at a gig, I borrowed a bright red on break time).
It not only gives a bit of grip, it protects your fingers from the effects of two of the metals in the fingerpicks: the copper turns your fingers green and the zinc dries the skin.
bob
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
More amps than guitars, and not many effects
-
Kevin Mincke
- Posts: 3102
- Joined: 27 Dec 1998 1:01 am
- Location: Farmington, MN (Twin Cities-South Metro) USA
- State/Province: -
- Country: United States
http://bb.steelguitarforum.com/viewtopi ... c&start=25
Someone was offering picks for sale sometime back with a dipped red type material
Someone was offering picks for sale sometime back with a dipped red type material
Last edited by Kevin Mincke on 5 Jul 2017 7:54 am, edited 1 time in total.
-
Wesley Medlen
- Posts: 937
- Joined: 14 Jul 2009 2:31 pm
- Location: LaCygne,Ks
- State/Province: -
- Country: United States
-
Bob Snelgrove
- Posts: 3453
- Joined: 4 Aug 1998 11:00 pm
- Location: san jose, ca
- State/Province: California
- Country: United States
-
Jeff Harbour
- Posts: 640
- Joined: 27 Mar 2007 8:04 am
- Location: Western Ohio, USA
- State/Province: Ohio
- Country: United States
-
Larry Hamilton
- Posts: 1319
- Joined: 20 Aug 2003 12:01 am
- Location: Amarillo,Tx
- State/Province: -
- Country: United States
-
Scott Denniston
- Posts: 880
- Joined: 19 Jan 2004 1:01 am
- Location: Hahns Peak, Colorado, USA
- State/Province: Colorado
- Country: United States
-
Bob Snelgrove
- Posts: 3453
- Joined: 4 Aug 1998 11:00 pm
- Location: san jose, ca
- State/Province: California
- Country: United States
-
Jerry Overstreet
- Posts: 14878
- Joined: 11 Jul 2000 12:01 am
- Location: Louisville
- State/Province: Kentucky
- Country: United States
-
Tim Russell
- Posts: 958
- Joined: 12 Apr 2015 7:45 am
- Location: Pennsylvania, USA
- State/Province: Pennsylvania
- Country: United States
Wow! It finally hit me!
I knew there was a thread (probably more than one) I saw on here in the past regarding this issue with picks. In the previous threads the discussion was about using that "plastic-dip" coating that you can get from hardware stores, applying it to the bands of the pick. Heat-shrink tubing was also mentioned.
Since I do not have any of that plastic-dip stuff on hand, I decided to try the heat shrink. It works great! I sleeved the entire band, but I'm going to experiment; I believe a small sized piece, maybe 1/4" on the bottom or side of the band may be sufficient.
It feels a little "odd", since I'm used to "bareback", lol - but after playing 10 min. or so, I can see myself getting used to the feel. And maybe it only feels odd because I have the tubing applied to the ends of the band, where it has an odd feel on my fingernails.
If I trimmed that part away, and only have it on the sides of the band, I think it would feel more comfortable. One thing I can tell you is, they no longer slip!
This pic is from a previous thread - these are not my picks.

I knew there was a thread (probably more than one) I saw on here in the past regarding this issue with picks. In the previous threads the discussion was about using that "plastic-dip" coating that you can get from hardware stores, applying it to the bands of the pick. Heat-shrink tubing was also mentioned.
Since I do not have any of that plastic-dip stuff on hand, I decided to try the heat shrink. It works great! I sleeved the entire band, but I'm going to experiment; I believe a small sized piece, maybe 1/4" on the bottom or side of the band may be sufficient.
It feels a little "odd", since I'm used to "bareback", lol - but after playing 10 min. or so, I can see myself getting used to the feel. And maybe it only feels odd because I have the tubing applied to the ends of the band, where it has an odd feel on my fingernails.
If I trimmed that part away, and only have it on the sides of the band, I think it would feel more comfortable. One thing I can tell you is, they no longer slip!
This pic is from a previous thread - these are not my picks.

Sierra Crown D-10
-
Bob Snelgrove
- Posts: 3453
- Joined: 4 Aug 1998 11:00 pm
- Location: san jose, ca
- State/Province: California
- Country: United States
Tim Russell wrote:Wow! It finally hit me!
I knew there was a thread (probably more than one) I saw on here in the past regarding this issue with picks. In the previous threads the discussion was about using that "plastic-dip" coating that you can get from hardware stores, applying it to the bands of the pick. Heat-shrink tubing was also mentioned.
Since I do not have any of that plastic-dip stuff on hand, I decided to try the heat shrink. It works great! I sleeved the entire band, but I'm going to experiment; I believe a small sized piece, maybe 1/4" on the bottom or side of the band may be sufficient.
It feels a little "odd", since I'm used to "bareback", lol - but after playing 10 min. or so, I can see myself getting used to the feel. And maybe it only feels odd because I have the tubing applied to the ends of the band, where it has an odd feel on my fingernails.
If I trimmed that part away, and only have it on the sides of the band, I think it would feel more comfortable. One thing I can tell you is, they no longer slip!
This pic is from a previous thread - these are not my picks.
What size shrink wrap?
bob
-
Tim Russell
- Posts: 958
- Joined: 12 Apr 2015 7:45 am
- Location: Pennsylvania, USA
- State/Province: Pennsylvania
- Country: United States
Bob,
I have smaller hands, skinny fingers, so my picks are "mediums", I think. For mine, I used a 19/64". Maybe others can chime in if they wear larger picks and have used heat shrink tube.
I have been using Pro Piks lately, and they are my favorite so far.
They are kind of like Dunlops, but the bands are flat, not curved. The curved band on the Dunlops have a tendency to get caught in the strings when I pick, and Nationals, the bands are too narrow for my liking.
So, it may be that a smaller tube would fit Nationals. I suggest taking your picks to the hardware store, Home Depot, and ask if you can try on a few shrink tubes for the best size.
I have smaller hands, skinny fingers, so my picks are "mediums", I think. For mine, I used a 19/64". Maybe others can chime in if they wear larger picks and have used heat shrink tube.
I have been using Pro Piks lately, and they are my favorite so far.
They are kind of like Dunlops, but the bands are flat, not curved. The curved band on the Dunlops have a tendency to get caught in the strings when I pick, and Nationals, the bands are too narrow for my liking.
So, it may be that a smaller tube would fit Nationals. I suggest taking your picks to the hardware store, Home Depot, and ask if you can try on a few shrink tubes for the best size.
Sierra Crown D-10
-
Bob Snelgrove
- Posts: 3453
- Joined: 4 Aug 1998 11:00 pm
- Location: san jose, ca
- State/Province: California
- Country: United States
Thanks, TimTim Russell wrote:Bob,
I have smaller hands, skinny fingers, so my picks are "mediums", I think. For mine, I used a 19/64". Maybe others can chime in if they wear larger picks and have used heat shrink tube.
I have been using Pro Piks lately, and they are my favorite so far.
They are kind of like Dunlops, but the bands are flat, not curved. The curved band on the Dunlops have a tendency to get caught in the strings when I pick, and Nationals, the bands are too narrow for my liking.
So, it may be that a smaller tube would fit Nationals. I suggest taking your picks to the hardware store, Home Depot, and ask if you can try on a few shrink tubes for the best size.
So, you have to stretch it first before shrinking?
bob
-
Jerry Overstreet
- Posts: 14878
- Joined: 11 Jul 2000 12:01 am
- Location: Louisville
- State/Province: Kentucky
- Country: United States
What I have here is just under 1/2"..about 12.5mm close as I can get. I put it on the same picks as in Tim's photo. That size slips over the bands easily and shrinks down nicely.
I believe I got this stuff in a cheap shrink wrap assortment pack from either Harbor Freight or Parts-Express...can't remember and neither site shows this particular size now, but I know it's out there somewhere.
This method that we pretty much stole from Doug Rolfe works pretty good against slippage but I personally don't like the feel.
Matter of fact I think Doug still sells the picks already done and he does a nice job on them.
I believe I got this stuff in a cheap shrink wrap assortment pack from either Harbor Freight or Parts-Express...can't remember and neither site shows this particular size now, but I know it's out there somewhere.
This method that we pretty much stole from Doug Rolfe works pretty good against slippage but I personally don't like the feel.
Matter of fact I think Doug still sells the picks already done and he does a nice job on them.
-
Tim Russell
- Posts: 958
- Joined: 12 Apr 2015 7:45 am
- Location: Pennsylvania, USA
- State/Province: Pennsylvania
- Country: United States
Thanks for the input, Jerry.
Initially, I was thinking of going with Lane's suggestion of coating the picks with nail polish, as I didn't really want to have to apply something to my fingers. An extra step, something extra to carry around...
So then the heat shrink idea came to me, remembering the threads I had seen in the past. Anyway, here is what I have determined. You only need a 1/4" of the tubing, applied to the middle of the bands, as shown in the pictures.
The extra tubing, as I initially used, covering to the end of the band, is too much - it makes for a really odd sensation on my fingernails, lol. As Jerry mentioned, I have an assortment pack from Harbor Freight too, and he obviously has larger fingers than I do, as 1/2" tube is a fair amount larger than the 19/64" that I used.
That said, this stuff shrinks an unbelievable amount, so 1/2" would probably work on all picks, I would guess.
Make sure to hold the pick with needle nose pliers, as it gets quite warm during the shrinking process!


Initially, I was thinking of going with Lane's suggestion of coating the picks with nail polish, as I didn't really want to have to apply something to my fingers. An extra step, something extra to carry around...
So then the heat shrink idea came to me, remembering the threads I had seen in the past. Anyway, here is what I have determined. You only need a 1/4" of the tubing, applied to the middle of the bands, as shown in the pictures.
The extra tubing, as I initially used, covering to the end of the band, is too much - it makes for a really odd sensation on my fingernails, lol. As Jerry mentioned, I have an assortment pack from Harbor Freight too, and he obviously has larger fingers than I do, as 1/2" tube is a fair amount larger than the 19/64" that I used.
That said, this stuff shrinks an unbelievable amount, so 1/2" would probably work on all picks, I would guess.
Make sure to hold the pick with needle nose pliers, as it gets quite warm during the shrinking process!


Sierra Crown D-10

