Fender Twin

Amplifiers, effects, pickups, electronic components, wiring, etc.

Moderator: Dave Mudgett

Gary Hamblin
Posts: 614
Joined: 9 Apr 2010 1:00 pm
Location: Callao, VA
State/Province: -
Country: United States

Fender Twin

Post by Gary Hamblin »

I just acquired a early seventies Twin and was wondering if anyone on the forum uses one for steel and what they think and if I need to make any changes.Thanks Gary.
JCH/SD10 ,ZUM,D10 ,Rosewood Emmons Push Pull,T8 Fender Stringmaster.Nashville and Session 400,Walker Stereo Steel,Boss Katana 100 and John Hughey's Vegas 400.Hilton Pro Delay,Telonics Volume Pedal, Steelers Choice Seat,Live Steel Strings.
Len Ryder
Posts: 264
Joined: 26 Aug 2000 12:01 am
Location: Penticton B.C.
State/Province: -
Country: United States

Post by Len Ryder »

I used one for many years. Heavy, but a great amp. Never once had any problems. Get the settings that are pleasing for you and you'll love it!!
User avatar
Ricky Davis
Posts: 11558
Joined: 4 Aug 1998 11:00 pm
Location: Rocky Top Ranch, Bertram, Texas USA and Liberty Hill, Tx
State/Province: Texas
Country: United States

Post by Ricky Davis »

Yes I cut this lastest CD with Fender Twin>
https://www.youtube.com/playlist?list=P ... uFTaHdIro1
Along with the past 15 years and same Fender Twin on close to 100 CD's and 6 Movie sound tracks(all richard linklater movies) and huge number of commercials, TV and Radio...
So YES I use a fender twin on stage and on all these recordings.
OH and so does Lloyd Green.
And it's not heavy if you split it up like this pic below.
Image
Oh and those cabinets(also Lloyd green has some identical to mine) were made by Rick Johnson.
My Speakers are JBL K-130
My Twin is a 1970 Silverface; but RE-point to point BlackFace wiring and components...but keeping the 100w. of silverface power; but the power tubes are the very expensive Military JanPhillips 6L6's.
Ricky
Ricky Davis
Email Ricky: sshawaiian2362@gmail.com
Jason King
Posts: 446
Joined: 16 Feb 2014 9:38 pm
Location: Missouri, USA
State/Province: Missouri
Country: United States

Post by Jason King »

I had Rick build Jacob some cabs for his 78 ultralinear twin, and with a 15in black widow it's not hard to pack and sounds great. Ricks work is first class.
Image
Harry Dove
Posts: 290
Joined: 5 Sep 1998 12:01 am
Location: Michigan, USA
State/Province: Michigan
Country: United States

Post by Harry Dove »

Ricky, it looks like you might be running an original Bud pickup. When I bought my LDG the pickup was shot so I put a L710 in it. So far I haven't found quite the tone I'm looking for. When I dial out the muddiness from the mids and lows the highs have a little too much bite and sound a little thin. I'm also using a Fender Twin. The only effects I'm using are a Carbon Copy and an RV3. The setup sounded perfect with my old Emmons. However, the Bud sounds like it could be more what I want if I can get it dialed in. I prefer the crisp sound of the Bud. I'm wondering if this pickup is going to get me there.
Skip Edwards
Posts: 3107
Joined: 1 Dec 1998 1:01 am
Location: LA,CA
State/Province: -
Country: United States

Post by Skip Edwards »

FWIW, Lloyd Green has a 710 in his LDG.
User avatar
Bill L. Wilson
Posts: 934
Joined: 14 Aug 2012 12:31 pm
Location: Oklahoma, USA
State/Province: Oklahoma
Country: United States

I Like'em.

Post by Bill L. Wilson »

I like my Twin, specially for guitar and steel. I did blow one of these D-130F's last week, but replaced them with D-140F's this week. I did a little tube swapping this week because of some distortion even with the D-140's. Everything seems to be Ok, distortion gone, but a set of new tubes is in order as I used old ones for the swap.
Image
User avatar
Ricky Davis
Posts: 11558
Joined: 4 Aug 1998 11:00 pm
Location: Rocky Top Ranch, Bertram, Texas USA and Liberty Hill, Tx
State/Province: Texas
Country: United States

Post by Ricky Davis »

Those look GREAT Jason...good going man.
Bill what a great set up...Love that white tolex.
Harry; Skip is right, Lloyd has the first made Bill Lawrence 710 in his. Do you have those first made ones or newly made 710? for a humbucker yes the original 705 or 710 are a right match. BUUUUT...ha...I have to have single coil and my original Sho-Bud pickup was actually rewound with coil tap by Harry Jackson..it is KILLER man. But yes original Sho-bud pick ups are very responsive; they DO NOT sound like there is a blanket thrown over them..if ya know what I mean? BUUUT..ha...me and Jerry Wallace tested and retested THE TrueTone pickup that would be the perfect response for the Sho-Bud original sound and that is a TrueTone wound to 17,500 ohms....(coil tap and he hates doing that but if you ask him nicely; tap is 11,500 ohms).
If you can't find a original sho-bud pickup that hasn't been kicked down the street for 40 years....get a TRUETONE and you will never look back.
Ricky
Ricky Davis
Email Ricky: sshawaiian2362@gmail.com
Dale Foreman
Posts: 1002
Joined: 8 Nov 2015 3:46 pm
Location: Crowley Louisiana, USA
State/Province: Louisiana
Country: United States

Twin

Post by Dale Foreman »

Image

I did the same thing with my 75. Rick Johnson is da man!
Rittenberry Prestige(2)
David Zornes
Posts: 469
Joined: 4 Feb 2012 8:18 am
Location: Ohio, USA
State/Province: Ohio
Country: United States

Fender twin g

Post by David Zornes »

The hotter the tubes are, the sweeter the tone.
User avatar
Tim Whitlock
Posts: 2045
Joined: 3 Jan 2001 1:01 am
Location: Colorado, USA
State/Province: Colorado
Country: United States

Post by Tim Whitlock »

Here is my custom built Twin Reverb. Tweed tonestack in the Normal channel, 1/2 power switch, multi-ohm transformer and Altec 418b speaker. I recovered it in brown tolex and had a custom faceplate built. Altecs or JBLs are a must for me in a Twin.


Image
Harry Dove
Posts: 290
Joined: 5 Sep 1998 12:01 am
Location: Michigan, USA
State/Province: Michigan
Country: United States

Post by Harry Dove »

Thanks Ricky, mine is one of the new ones and if just doesn't quite have that sound.
User avatar
Ricky Davis
Posts: 11558
Joined: 4 Aug 1998 11:00 pm
Location: Rocky Top Ranch, Bertram, Texas USA and Liberty Hill, Tx
State/Province: Texas
Country: United States

Post by Ricky Davis »

Yes Harry; the new is NOT anywhere like the original ones...or anything for that matter...ha.. If you HAVE to have a humbucker; find a old 705 or 710...or go single coil with that TrueTone I just suggested.
Ricky
Ricky Davis
Email Ricky: sshawaiian2362@gmail.com
Edward Rhea
Posts: 1179
Joined: 14 Mar 2013 6:36 pm
Location: Medford Oklahoma, USA
State/Province: Oklahoma
Country: United States

Post by Edward Rhea »

Fender Twin & that TruTone, in a round front Sho~Bud = AMAZING!!
Image
“TONESNOB”
User avatar
Jim Sliff
Posts: 7060
Joined: 22 Jun 2005 12:01 am
Location: Lawndale California, USA
State/Province: California
Country: United States

Post by Jim Sliff »

Did you check to see if the amp has been serviced any time in the last 10 years? If not it needs to get in to a tech for a checkup asap, and the filter caps (at minimum) will need to be replaced. If they're over 12-15 years old they're beyond their service life, can fail without any warning (or visual clues) and damage major components.

Close to 90% of the used Fender silverface amps I encounter that were bought used have not been properly serviced, even if they sound great. Quite a few end up here because of blown caps - some have needed transformer replacement.

It's worth checking out and definitely should be done if you didn't receive written documentation of service.
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional
Gary Hamblin
Posts: 614
Joined: 9 Apr 2010 1:00 pm
Location: Callao, VA
State/Province: -
Country: United States

Twin

Post by Gary Hamblin »

Thanks,Gary
JCH/SD10 ,ZUM,D10 ,Rosewood Emmons Push Pull,T8 Fender Stringmaster.Nashville and Session 400,Walker Stereo Steel,Boss Katana 100 and John Hughey's Vegas 400.Hilton Pro Delay,Telonics Volume Pedal, Steelers Choice Seat,Live Steel Strings.
User avatar
Josh Braun
Posts: 134
Joined: 26 Mar 2013 7:53 am
Location: Minneapolis, Minnesota, USA
State/Province: Minnesota
Country: United States

Post by Josh Braun »

Since we're talking twins...

Anyone try any of the new(ish) neo speakers in a twin?

E.g., the Travis Toy speaker, or some of the more guitar centric ones (Eminence Lil Texas).

If so, what did you think?
Steven Paris
Posts: 917
Joined: 4 Nov 2012 8:49 am
Location: Payson
State/Province: Arizona
Country: United States

Post by Steven Paris »

Gerald Weber, in his book "Desktop Reference of Hip Vintage Guitar Amps" (pg.165), recommends a Silver to Blackface conversion for 70s Twin Reverb amplifiers:
1) Rewire bias supply and add 2x220KΩ resistors
2) Replace 5 resistors and 1 cap in the P.I.
3) Remove 4 small capacitors
4) Replace 2 resistors in the power supply
This should be done by a good amp tech; but the results supposedly are stunning. CBS really DID screw up Leo's designs!!
Emmons & Peavey
Steven Paris
Posts: 917
Joined: 4 Nov 2012 8:49 am
Location: Payson
State/Province: Arizona
Country: United States

Post by Steven Paris »

Ricky Davis wrote:Yes I cut this lastest CD with Fender Twin>
https://www.youtube.com/playlist?list=P ... uFTaHdIro1
My Speakers are JBL K-130 My Twin is a 1970 Silverface; but RE-point to point BlackFace wiring and components...but keeping the 100w. of silverface power; but the power tubes are the very expensive Military JanPhillips 6L6's.
Ricky
Absolutely LOVE your work!! Thanks for sharing! (I listened to the whole album!)
Emmons & Peavey
User avatar
Tom Wolverton
Posts: 2922
Joined: 8 May 2008 3:52 pm
Location: Carpinteria, CA
State/Province: California
Country: United States

DB sounds spectacular thru a silverface TR with a K-130

Post by Tom Wolverton »

A Twin Reverb and a Sho-Bud. A really great tone match.

Image
To write with a broken pencil is pointless.
Buell Wisner
Posts: 141
Joined: 21 Jun 2014 1:18 pm
Location: Georgia, USA
State/Province: Georgia
Country: United States

Post by Buell Wisner »

Josh Braun wrote:Since we're talking twins...

Anyone try any of the new(ish) neo speakers in a twin?

E.g., the Travis Toy speaker, or some of the more guitar centric ones (Eminence Lil Texas).

If so, what did you think?
I rehoused my Twin in a Rick Johnson 1x15 combo cab with a Telonics speaker.

It sounds great to me.
User avatar
Dave Meis
Posts: 1144
Joined: 8 Jan 2015 7:46 pm
Location: Olympic Peninsula, Washington, USA
State/Province: Washington
Country: United States

Post by Dave Meis »

Buell Wisner wrote:
Josh Braun wrote:Since we're talking twins...

Anyone try any of the new(ish) neo speakers in a twin?

E.g., the Travis Toy speaker, or some of the more guitar centric ones (Eminence Lil Texas).

If so, what did you think?
I rehoused my Twin in a Rick Johnson 1x15 combo cab with a Telonics speaker.

It sounds great to me.
I also re-housed my twin in an RJ combo cab with a SICA 15", and I love it!
User avatar
Jim Sliff
Posts: 7060
Joined: 22 Jun 2005 12:01 am
Location: Lawndale California, USA
State/Province: California
Country: United States

Post by Jim Sliff »

The blackface conversion, except for rewiring the bias adjustment - useful only if you service your own amps - is not always the best thing for steel. It warms the amp up but also reduces headroom. If you play anyplace where you can turn it up past 4 or 5 it may not sound clean enough for you.
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional