Need a Fender pickup cover--help!!!

Bill Hatcher · Post by **Bill Hatcher** » 2 Nov 2003 11:21 am

I need a pickup cover for a Fender 8 string steel that has the wide "Jazzmaster" looking pickup. These pickups were on the later 50s and early 60s Fender 400 and 1000 guitars.
I am trying to get a guitar back on the air. Any other un-needed 400,1000 parts that you might have in a box somewhere would be welcomed!!

Click on the blue "email" link and let me know what you have and what you want for it. Many thanks, Bill

Bill Hatcher · Post by **Bill Hatcher** » 2 Nov 2003 2:45 pm

Also need a roller bridge for the same guitar. Thanks.

Bill Hatcher · Post by **Bill Hatcher** » 4 Nov 2003 6:23 pm

Bump. Still need these.

Dave Ristrim · Post by **Dave Ristrim** » 5 Nov 2003 4:57 am

Bill, I have a rusty old 800 I may part out. If anything is usable I will let you know. One of the necks was converted to a ten string so it only has one 8 string p/u with cover, one 8 string roller nut etc. I am not sure what to do with it. I may sell the whole thing as is.
Dave Ristrim

Erv Niehaus · Post by **Erv Niehaus** » 5 Nov 2003 6:54 am

As long as you're looking, I need a bridge cover for an 8 string Fender Stringmaster.
Your help would be appreciated!!!

Erv

Bill Hatcher · Post by **Bill Hatcher** » 5 Nov 2003 9:54 am

Dave. Check your email please sir.

C. Brattain · Post by **C. Brattain** » 5 Nov 2003 11:07 am

As long as we are into bridge covers I need two bridge covers for 26" scale Fender 8 String, String Master. This bridge cover is put on with two small screws, Chuck