What brands have a distinctive tone?
Moderator: Dave Mudgett
-
Carson Leighton
- Posts: 592
- Joined: 4 Aug 1998 11:00 pm
- Location: N.B. Canada
- State/Province: -
- Country: United States
What brands have a distinctive tone?
Most of us that have been playing for quite a while can usually pick out an Emmons or Sho~Bud sound. With so many other brands of guitars out there, which one's have a distinctive sound? I'm not familiar with a lot of the other newer guitars and their tone.....Carson
-
ebb
- Posts: 1480
- Joined: 4 Aug 1998 11:00 pm
- Location: nj
- State/Province: -
- Country: United States
-
Joerg Hennig
- Posts: 1046
- Joined: 17 May 2001 12:01 am
- Location: Bavaria, Germany
- State/Province: -
- Country: United States
-
Donny Hinson
- Posts: 21830
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
- State/Province: -
- Country: United States
They all might sound just a little different, but they <u>all</u> sound good. That's the important part. I've <u>yet</u> to play a steel I couldn't get a good sound (tone?) from. From what I read on the Forum, though, others aren't as lucky. Sidelight---Most blues and jazz players get a simply awful tone from their 6-stringers, but they're happy with it. I just write it all off as their "personal preference", and feel that most players who are unhappy with their "sound" are really just unhappy with their own playing.
Here's a "challenge" for 'ya. Got a steel with a "bad sound"? Bring it around sometime. Bring a tape recorder, too. I'll <u>show</u> you how to make it sound good!
Here's a "challenge" for 'ya. Got a steel with a "bad sound"? Bring it around sometime. Bring a tape recorder, too. I'll <u>show</u> you how to make it sound good!

-
Ray Montee (RIP)
- Posts: 9506
- Joined: 7 Jul 1999 12:01 am
- Location: Portland, Oregon (deceased)
- State/Province: Oregon
- Country: United States
-
Derek Duplessie
- Posts: 305
- Joined: 13 Feb 2001 1:01 am
- Location: La Jolla CA USA
- State/Province: -
- Country: United States
-
Eric West
- Posts: 5747
- Joined: 25 Apr 2002 12:01 am
- Location: Portland, Oregon, USA, R.I.P.
- State/Province: -
- Country: United States
Ray. Next time Doug is at Jubitz I think we'd both like to hear that Bigsby fired up. Us Young'uns haven't heard many if any of them.
You know it's funny. Larry Behm and I were just talking about that, and DAnny SHields' name came up.
Larry noted how Danny had a unique knowledge of just how the pickups were wound, engineered with magnet size and placement. He was the one who wound the pickups for Sierra at one point, and he did a couple of mine.
His area of course was more pickups than "cabinets" or course, but he could reportedly tell a bigsby from an msa, emmons, or SHo Bud.
Me, I'm not sure I can.
My favorite has always been the old Sho Bud, thin sound. Lots of "body noise".
I'm looking forward to getting the new Lloyd Green CD to see if his "sound" has changed from what I remember.
I'd say Sho Bud, Dekley, and ZBseemed to have a similar sound, seperate from the others, and thinner by characteristic. ZBs and some SHoBuds had tap switches that would guarantee high end.
The others, I'm not that sure about.

Gotta run.
EJL
You know it's funny. Larry Behm and I were just talking about that, and DAnny SHields' name came up.
Larry noted how Danny had a unique knowledge of just how the pickups were wound, engineered with magnet size and placement. He was the one who wound the pickups for Sierra at one point, and he did a couple of mine.
His area of course was more pickups than "cabinets" or course, but he could reportedly tell a bigsby from an msa, emmons, or SHo Bud.
Me, I'm not sure I can.
My favorite has always been the old Sho Bud, thin sound. Lots of "body noise".
I'm looking forward to getting the new Lloyd Green CD to see if his "sound" has changed from what I remember.
I'd say Sho Bud, Dekley, and ZBseemed to have a similar sound, seperate from the others, and thinner by characteristic. ZBs and some SHoBuds had tap switches that would guarantee high end.
The others, I'm not that sure about.

Gotta run.
EJL
-
Jeff A. Smith
- Posts: 807
- Joined: 14 Feb 2001 1:01 am
- Location: Angola,Ind. U.S.A.
- State/Province: -
- Country: United States
Old MSA's have their own sound. Many don't care for it, but there's no denying they're different.<SMALL>With so many other brands of guitars out there, which one's have a distinctive sound?</SMALL>
My brother recently bought a CD by L.T. Zinn, on which he is playing an MSA. I simply cannot imagine that anybody would say that L.T. isn't getting a beautiful tone on this CD. And yet it is still identifiably an MSA. It isn't trying to be a Sho-Bud, Emmons, or anything else. Anybody wanting to hear what an old MSA can do in the right hands, besides what Reece, Mike Perlowin, and Curly Chalker have done, check out the gospel CD by L.T. Zinn.
Beautiful and unique tone.
-
Carl West
- Posts: 429
- Joined: 28 Aug 2001 12:01 am
- Location: La Habra, CA, USA (deceased)
- State/Province: -
- Country: United States
I played Fender for years. Depending on the pickups, if one had the means to change them helped. I finally went back to the originals on the 2000 model.
My Emmons has a great sound but I'm inclined to agree with David that the sound is there on many, you just have to find what your looking for.
Carl West
My Emmons has a great sound but I'm inclined to agree with David that the sound is there on many, you just have to find what your looking for.
Carl West
-
Carl West
- Posts: 429
- Joined: 28 Aug 2001 12:01 am
- Location: La Habra, CA, USA (deceased)
- State/Province: -
- Country: United States
-
Jody Carver
- Posts: 7968
- Joined: 3 Jan 2001 1:01 am
- Location: KNIGHT OF FENDER TWEED
- State/Province: -
- Country: United States
-
Ray Montee (RIP)
- Posts: 9506
- Joined: 7 Jul 1999 12:01 am
- Location: Portland, Oregon (deceased)
- State/Province: Oregon
- Country: United States
Well now Eric..........I suppose I could do that, altho' it's too wide to fit in the rear of my van. I'll try to figure something out for a rainy day in the future.
Danny Sheilds came to my place just prior to his passing. He measured the Bigsby pickup dimensions and examined and measured some more. Never heard anything after that.
Danny Sheilds came to my place just prior to his passing. He measured the Bigsby pickup dimensions and examined and measured some more. Never heard anything after that.
-
Eric West
- Posts: 5747
- Joined: 25 Apr 2002 12:01 am
- Location: Portland, Oregon, USA, R.I.P.
- State/Province: -
- Country: United States
I heard that whatever Bigsby's formulas were were the "cat's pajamas" when it came to clarity/signal strength, and he was peobably going to try and duplicate it.
I wish to heck I could find my SB E9 that he wound for me. I really liked it, and it might give ideas to those currently winding them. I'm still looking.
EJL
I wish to heck I could find my SB E9 that he wound for me. I really liked it, and it might give ideas to those currently winding them. I'm still looking.
EJL
-
Donny Hinson
- Posts: 21830
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
- State/Province: -
- Country: United States
What Jody says is significant. Many people say that Fender pedal steels do have a most "distinctive" sound. I think that most steels can have a distinctive sound, but they don't always. It has to do with the player, and the amp, as well. Many players bought Emmons pedal steels to get Buddy's sound, and some were quite disappointed! Same goes for ZB...they don't always give you the sound that Tom Brumley had on Buck's records.
There's much more in the equation than just the brand of the guitar.
Brands have characteristics, but those characteristics vary tremendously, depending on the player and the amp. Dig out some old records, and give 'em a listen...
Listen to some of Ralph Mooney's early playing. Now listen to Jimmy Day's "Steel And Strings". Then listen to some of Sneaky Pete Kleinow's stuff. Then, put on an old Buck Owens record with Jay McDonald. Finally, listen to Curly Chalker's "Big Hits On Big Steel".
Okay, now...what did you hear?
Did they all sound alike?
Did they all sound even <u>remotely</u> alike?
Have you learned anything about the "tone" of particular steels? Well, I certainly hope so!
You see, you've got a surprise coming.
It may be something you've probably never realized, or even thought about!
All these wonderful, yet vastly different sounds were played...
...on a Fender pedal steel!!!
And now, you know...the rest of the story.
(And why everyone who plays an Emmons doesn't sound like Buddy!) <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Donny Hinson on 25 August 2003 at 11:21 AM.]</p></FONT>
There's much more in the equation than just the brand of the guitar.
Brands have characteristics, but those characteristics vary tremendously, depending on the player and the amp. Dig out some old records, and give 'em a listen...
Listen to some of Ralph Mooney's early playing. Now listen to Jimmy Day's "Steel And Strings". Then listen to some of Sneaky Pete Kleinow's stuff. Then, put on an old Buck Owens record with Jay McDonald. Finally, listen to Curly Chalker's "Big Hits On Big Steel".
Okay, now...what did you hear?
Did they all sound alike?
Did they all sound even <u>remotely</u> alike?
Have you learned anything about the "tone" of particular steels? Well, I certainly hope so!
You see, you've got a surprise coming.
It may be something you've probably never realized, or even thought about!
All these wonderful, yet vastly different sounds were played...
...on a Fender pedal steel!!!
And now, you know...the rest of the story.
(And why everyone who plays an Emmons doesn't sound like Buddy!) <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Donny Hinson on 25 August 2003 at 11:21 AM.]</p></FONT>
-
Larry Bell
- Posts: 5550
- Joined: 4 Aug 1998 11:00 pm
- Location: Englewood, Florida
- State/Province: Florida
- Country: United States
Nor does everyone who plays a FENDER
Four Wheel Drive was recorded on a Fender.
------------------
<small>Larry Bell - email: larry@larrybell.org - gigs - Home Page
2003 Fessenden S/D-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro, Standel and Peavey Amps
Four Wheel Drive was recorded on a Fender.
------------------
<small>Larry Bell - email: larry@larrybell.org - gigs - Home Page
2003 Fessenden S/D-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro, Standel and Peavey Amps
-
ebb
- Posts: 1480
- Joined: 4 Aug 1998 11:00 pm
- Location: nj
- State/Province: -
- Country: United States
with all due respect to dh.
i definitley can hear the fender connection for mooney,mcdonald and sneaky. there are some dissenting opinions on day's steel and strings and chalker's big hits from herb steiner and tommy white who identify these guitars as sho~buds. but i wouldn't be suprised if chalker was playing a sierra artist. he definitely makes hinson's point <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by ebb on 25 August 2003 at 06:56 PM.]</p></FONT>
i definitley can hear the fender connection for mooney,mcdonald and sneaky. there are some dissenting opinions on day's steel and strings and chalker's big hits from herb steiner and tommy white who identify these guitars as sho~buds. but i wouldn't be suprised if chalker was playing a sierra artist. he definitely makes hinson's point <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by ebb on 25 August 2003 at 06:56 PM.]</p></FONT>
-
Jody Carver
- Posts: 7968
- Joined: 3 Jan 2001 1:01 am
- Location: KNIGHT OF FENDER TWEED
- State/Province: -
- Country: United States
-
Bobby Lee
- Site Admin
- Posts: 14863
- Joined: 4 Aug 1998 11:00 pm
- Location: Cloverdale, California, USA
- State/Province: -
- Country: United States
Ed Bierly wrote:
------------------
<font size="1"><img align=right src="http://b0b.com/Hotb0b.gif" width="96 height="96">Bobby Lee - email: quasar@b0b.com - gigs - CDs, Open Hearts
Sierra Session 12 (E9), Williams 400X (Emaj9, D6), Sierra Olympic 12 (C6add9),
Sierra Laptop 8 (D13), Fender Stringmaster (E13, A6),
Roland Handsonic, Line 6 Variax</font>
I thought that the Sierra Artist was a recent model, invented after Curly left us. Was there another, earlier Sierra Artist model?<SMALL>but i wouldn't be suprised if chalker was playing a sierra artist.</SMALL>
------------------
<font size="1"><img align=right src="http://b0b.com/Hotb0b.gif" width="96 height="96">Bobby Lee - email: quasar@b0b.com - gigs - CDs, Open Hearts
Sierra Session 12 (E9), Williams 400X (Emaj9, D6), Sierra Olympic 12 (C6add9),
Sierra Laptop 8 (D13), Fender Stringmaster (E13, A6),
Roland Handsonic, Line 6 Variax</font>
-
ebb
- Posts: 1480
- Joined: 4 Aug 1998 11:00 pm
- Location: nj
- State/Province: -
- Country: United States
-
Kevin Hatton
- Posts: 8233
- Joined: 3 Jan 2002 1:01 am
- Location: Buffalo, N.Y.
- State/Province: -
- Country: United States
-
Craig Holden
- Posts: 194
- Joined: 4 Aug 1998 11:00 pm
- Location: Austin, Texas
- State/Province: Texas
- Country: United States
I have and play a '58 Fender 1000 and have compared it side by side to a '68 Emmons and a '70 Professional. The Fender's tone and timbre is very different, I suppose in part due to the the longer scale, the fixed bridge and nut, and the wrap-around aluminum frame. A glassy tone is how I describe it. My buddy says it sounds like a Tele with pedals, and t'aint bad at that!
-
Gerald Menke
- Posts: 851
- Joined: 24 Jul 2001 12:01 am
- Location: Stormville NY, USA
- State/Province: -
- Country: United States
Interesting question, I'd like to add that Williams guitars have a distinctive tone, Bob Hoffnar and I get together from time to time and it's remarkable how different the Williams sounds from his old push-pull. Granted, his Emmons does sound tougher, more aggressive, but harmonics sound out of this world on the Williams. Listen to any record with Greg Leisz and you'll hear it. Funny thing is that when Bob plays my guitar, he sounds just like him, and when I try to play his, I sound like me.
-
Jim Cohen
- Posts: 21849
- Joined: 18 Nov 1999 1:01 am
- Location: Philadelphia, PA
- State/Province: Pennsylvania
- Country: United States
-
John De Maille
- Posts: 2306
- Joined: 16 Nov 1999 1:01 am
- Location: On a Mountain in Upstate Halcottsville, N.Y.
- State/Province: -
- Country: United States
-
Herb Steiner
- Posts: 12636
- Joined: 4 Aug 1998 11:00 pm
- Location: Briarcliff TX 78669, pop. 2,064
- State/Province: -
- Country: United States
To clarify matters, I never opined that Curly played a Sho~Bud on "Big Hits." It's fairly well known that he played a Fender 1K on that record.
Though I was a dear friend of Jimmy Day, I did mistakenly hold the belief for awhile that "Steel and Strings" was a Fender guitar. It was a Sho~Bud on that recording. In D9 tuning, incidentally.
------------------
Herb's Steel Guitar Pages
Texas Steel Guitar Association
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Herb Steiner on 10 September 2003 at 04:56 PM.]</p></FONT>
Though I was a dear friend of Jimmy Day, I did mistakenly hold the belief for awhile that "Steel and Strings" was a Fender guitar. It was a Sho~Bud on that recording. In D9 tuning, incidentally.
------------------
Herb's Steel Guitar Pages
Texas Steel Guitar Association
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Herb Steiner on 10 September 2003 at 04:56 PM.]</p></FONT>
