Dallas Seminar March 2014 (UPDATE)

Buck Reid · Post by **Buck Reid** » 10 Sep 2013 4:49 pm

Thank you for your interest in attending my seminar in Dallas (March-2014)! My plan is to explain my approach to a few tunes from my "A Work In Progress" CD and will be open to general questions also. I will have CD's, Rhythm Track CD's and Tab booklets available for purchase... all of which we'll be working from. Audio recorders are welcome but no video recorders please.

Also... here is a link to the TSGA website for additional info: http://www.texassteelguitar.org/jam.html

To register please send your contact info along check or money order in the amount of $70 to address below. I will confirm your registration via email when payment is received.

Looking forward to seeing everyone... thanks again !

Buck

Buck Reid
8921 - Apt. E
Saundersville, RD
Mt. Juliet, TN 37122

buckreid@comcast.net

Sid Hudson · Post by **Sid Hudson** » 10 Sep 2013 5:31 pm

It will be great

Mickey Adams · Post by **Mickey Adams** » 10 Sep 2013 6:26 pm

Count me IN!!>......

Wally Moyers · Post by **Wally Moyers** » 10 Sep 2013 7:25 pm

Cool!

Buck Reid · Post by **Buck Reid** » 24 Sep 2013 11:27 am

Thanks to those who have registered and I'll be looking forward to seeing you in March! Still seats available folks.

Ken Byng · Post by **Ken Byng** » 30 Sep 2013 12:36 pm

I'm in Buck - payment sent. I'm looking forward to seeing and hearing some of those sizzling licks and runs from Sourdough, "Scrapple" and Alabama Jubilee.

Buck Reid · Post by **Buck Reid** » 30 Sep 2013 4:48 pm

Thank you Ken! I have you confirmed and look forward to seeing you. Please send me your current email address for my records.

pdl20 · Post by **pdl20** » 4 Oct 2013 8:56 pm

Buck, I plan on being there ,will send in the money after first of the year. i went to Mike Johnsons last year and it was well worth it, so will your seminar, Its really nice to have you all do a show and tell and the how and why of your playing. looking forward to it. Rudy

Buck Reid · Post by **Buck Reid** » 8 Oct 2013 1:03 am

Great Rudy... look forward to seeing you there!

Buck Reid · Post by **Buck Reid** » 10 Oct 2013 9:56 am

UPDATE: I spoke with Albert Talley, President of the TSGA today and have some new info for the Dallas seminar in March 2014.

Due to limited space we will not have room for guitars or amps. I will have binder booklets with the tabbed material we will be covering. I do encourage everyone to bring their own note pads and an audio recorder for reference later. The seating capacity is 75 and I have had a few folks register in advance. Thanks to all for your interest and support and I look forward to seeing you in March.

Bob Snelgrove · Post by **Bob Snelgrove** » 10 Oct 2013 3:44 pm

Buck Reid wrote:UPDATE: I spoke with Albert Talley, President of the TSGA today and have some new info for the Dallas seminar in March 2014.

Due to limited space we will not have room for guitars or amps. I will have binder booklets with the tabbed material we will be covering. I do encourage everyone to bring their own note pads and an audio recorder for reference later. The seating capacity is 75 and I have had a few folks register in advance. Thanks to all for your interest and support and I look forward to seeing you in March.

\

Hey Buck!

Why not video tape it sell it down the road? It would be a great supplement for the attendees and priceless for us that can't make it!

bob

Buck Reid · Post by **Buck Reid** » 26 Oct 2013 8:00 am

Hi Bob! Thanks for the suggestion... I have given it some thought. For me personally, I think preparing for the seminar and two shows that weekend is about as much as I can bite off. I do plan to do some kind of instructional video at some point and would rather do it in a more controlled and less hectic environment. Again... thanks for the input and hope all is well with you!

Also... I would encourage folks who are interested to register early as many have and we only have 75 seats.

Thanks again to all for their interest and support!

Buck Reid · Post by **Buck Reid** » 26 Oct 2013 4:50 pm

Rudy... received your email and in my attempt to reply, I got the following error message...

<pdl20w>: host core
mpb005b.r1000.mail.aol.com[172.29.191.83] said: 554
5.7.1 Your mail could not be delivered because the recipient is only
accepting mail from specific email addresses. If you feel you received this
in error, please contact the recipient directly and ask them to check their
email settings. (in reply to end of DATA command)

I don't know what this means except you might have a filter on your email inbox... fine with me. Just wanted you to know I got your email and all is good.
Thanks!!

pdl20 · Post by **pdl20** » 26 Oct 2013 8:39 pm

sorry, will try again later. fee on way in a couple of weeks for Dallas. Rudy

Ken Byng · Post by **Ken Byng** » 14 Nov 2013 12:19 am

Bumpety bump

Ken Byng · Post by **Ken Byng** » 14 Nov 2013 12:19 am

Duplicate post

Olli Haavisto · Post by **Olli Haavisto** » 22 Nov 2013 2:07 am

Done.

Buck Reid · Post by **Buck Reid** » 27 Nov 2013 9:35 am

Thank you to those who have already registered! I'm hearing that there are questions about covering material on both the E9th & C6th tunings. I will be discussing some of my approach using tunes from my "A Work In Progress" cd, using both tunings. I also plan to have time for some miscellaneous questions in the hope that it will be helpful. There are still seats available and hope to see many smiling faces there. Happy Thanksgiving to everyone!

steve takacs · Post by **steve takacs** » 1 Dec 2013 12:48 pm

Buck, Where can I buy your A Work In Progress" CD and the tab that goes along with it. I'd have it sent to a USA address. Thanks stevet

Ken Byng · Post by **Ken Byng** » 1 Dec 2013 1:19 pm

Steve
Please see Bruce Bouton's thread and the response to your post.

Ken

Buck Reid · Post by **Buck Reid** » 1 Dec 2013 5:14 pm

Hi Steve... you can find it at www.buckreid.com Thanks for your interest.

steve takacs · Post by **steve takacs** » 1 Dec 2013 7:28 pm

Thanks, Buck Ken and Craig Bakerof Lil Izzy fame who also sent me this site address. Unfortunately I can not get into some sites from here in China. Fortunately in about three weeks I will be outside China for a few weeks and should be able to access it though. Thanks, all, steve

Buck Reid · Post by **Buck Reid** » 1 Dec 2013 7:54 pm

No worries Steve. If you like, you can email me at buckreid@comcast.net

Buck Reid · Post by **Buck Reid** » 30 Dec 2013 10:21 am

Hope everyone had a great Christmas and Happy New Year in advance!

Thanks to those who have already registered for the seminar. Just a heads up that there are still seats available but if you want to attend, I would encourage you to register now as the seats are filling faster now. I look forward to seeing everyone in March.

Buck Reid · Post by **Buck Reid** » 9 Jan 2014 9:13 am

The Steel Guitar Forum

Dallas Seminar March 2014 (UPDATE)

Dallas Seminar March 2014 (UPDATE)

Dallas Seminar March 2014

Buck.Its this Aol thing i guess.

"A Work In Progress" CD and tab