nv 112

Amplifiers, effects, pickups, electronic components, wiring, etc.

Moderator: Dave Mudgett

User avatar
Mike Bowles
Posts: 995
Joined: 4 Feb 2004 1:01 am
Location: Princeton, West Virginia, USA
State/Province: West Virginia
Country: United States

nv 112

Post by Mike Bowles »

my nv 112 has a really bad buzz nothing hooked up just the amp plugged up and turned on sometimes you can turn it off and back on and it will stop for a minute then start back house wiring is good tried it in a different room same thing i sent it back to peavey it stopped for a little while then started again it is not undert warranty i dont think very annoying any help would be appreciated
Mike Bowles
Top
Jack Ritter
Posts: 1104
Joined: 5 May 2005 12:01 am
Location: Enid, Oklahoma, USA
State/Province: Oklahoma
Country: United States

Post by Jack Ritter »

Any fluorscent bulbs with ballasts in the room or area? These can cause a hum. Jack
Zum D10 8x5,rev pre-amp, TC M300, Split 12, n-112, IZZY, Hilton vp, Geo L, BJS Hughey, Live Steel
Top
User avatar
Mike Bowles
Posts: 995
Joined: 4 Feb 2004 1:01 am
Location: Princeton, West Virginia, USA
State/Province: West Virginia
Country: United States

nv 112

Post by Mike Bowles »

thanks jack no fluorescent lights in the house
Mike Bowles
Top
Mike Brown
Posts: 5027
Joined: 4 Aug 1998 11:00 pm
Location: Meridian, Mississippi USA
State/Province: Mississippi
Country: United States

?

Post by Mike Brown »

Dimmer switches AC line? Does it buzz with no input. Is the reverb control turned up?
Top
User avatar
Mike Bowles
Posts: 995
Joined: 4 Feb 2004 1:01 am
Location: Princeton, West Virginia, USA
State/Province: West Virginia
Country: United States

nv112

Post by Mike Bowles »

thanks mike nothing hooked up to the amp sometimes you can turn it off and back on and it will stop then start buzzing again no reverb turned on at all there are no dimmer switches i moved the amp same thing wiring in the house is good its a new house
Mike Bowles
Top

Return to “Electronics”