Show off your steel ! (Pros too)

Randy Patton · Post by **Randy Patton** » 8 Jan 2009 1:12 am

Here is my contribution to the MSA clan

This is my 76 D12 Classic...

This is my 07 Milly...

Ray McCarthy · Post by **Ray McCarthy** » 9 Jan 2009 10:23 am

Herb Steiner · Post by **Herb Steiner** » 9 Jan 2009 5:32 pm

Paddy Long · Post by **Paddy Long** » 10 Jan 2009 3:18 pm

Norman Evans · Post by **Norman Evans** » 17 Jan 2009 2:10 pm

My Toys,

Norm Evans

Buddy Castleberry · Post by **Buddy Castleberry** » 19 Jan 2009 1:07 pm

Bobby Boggs · Post by **Bobby Boggs** » 19 Jan 2009 1:33 pm

Bump.

Tommy Shown · Post by **Tommy Shown** » 19 Jan 2009 10:28 pm

Mark Trzepacz wrote:Man, I would love to know how some of you boys get those end plates so nice and highly polished!(?)

Mother's is good, Mother's is wise.
I have used that Mother's polish and I have also used
a polish called Flitz. Both polishes will get the job
done.
Tommy Shown
As you can see Tommy is writing this while staying awake on the graveyard shift

Bernie Gonyea · Post by **Bernie Gonyea** » 20 Jan 2009 4:29 pm

Here's my Stage-one Steel [ 2007 ] Licensed by Zum..Bernie

Frank Freniere · Post by **Frank Freniere** » 23 Jan 2009 6:41 am

Skip Ellis · Post by **Skip Ellis** » 23 Jan 2009 8:56 am

Here's another one for the Desert Rose lovers out there.

Bernie Gonyea · Post by **Bernie Gonyea** » 23 Jan 2009 3:09 pm

Frank : I'm not familiar with your brand of guitar. Tell us a little about it, will you, please.

Skip, your Dessert Rose is a beauty
Thank you both for sharing your axes with us..Bernie

Henning Kock · Post by **Henning Kock** » 24 Jan 2009 5:11 am

Frank Freniere · Post by **Frank Freniere** » 24 Jan 2009 11:54 am

Hi Bernie -

It's an all-metal SGI S-10 I bought from Scotty in the early '80's. As you might guess, it's got a thin sound that I tell myself is Mooney-esque. The beauty of the thing is that it only weighs about 15 lbs. It does everything a S-10 w/ 3&4 does, only real easy to tote around.

I think they were made in Japan. Mitsuo Fujii played a D-10 at the ISGC Convention St. Louis back then. Regards, FF.

Mickey Adams · Post by **Mickey Adams** » 26 Jan 2009 6:00 pm

[/img]

Bernie Gonyea · Post by **Bernie Gonyea** » 26 Jan 2009 6:21 pm

Mickey : Those are two good looking Mullin guitars; love the color ; whom says black is better?Don't you have a new Jackson coming or already there ? I love to hear Austin Stewart and Jerry Newberry on their Mullins..If I were still active, I'd have one of these guitars. [ An SD-10 or 12..]Bernie

Clinton Erb · Post by **Clinton Erb** » 26 Jan 2009 6:33 pm

This guy....

Into this guy...

All into this guy...

[/img]

Cliff Kane · Post by **Cliff Kane** » 26 Jan 2009 6:41 pm

Here's another one:

A beautiful California blond:

Clinton Erb · Post by **Clinton Erb** » 26 Jan 2009 7:02 pm

Cliff Kane wrote:Here's another one:

A beautiful California blond:

Hawt dang!

Now that's pretty!

Tommy Young · Post by **Tommy Young** » 26 Jan 2009 7:31 pm

This is one that I just got thru totally rebuilding and painting it has red flakes in it along with the candy apple color but the camera clipped most of the flakes because of the red eye eliminator it has but a few showed thru

Roy Ayres · Post by **Roy Ayres** » 8 Feb 2009 5:30 pm

Excel Superb S10 6 + 5 Keyless with lock lever
Custom built to my specifications
Basic tuning: E 6/9
Lock lever gives: A6
(My copedent is on my website shown below in signature

Jamie Lennon · Post by **Jamie Lennon** » 26 Jun 2009 9:10 am

my baby !!! best steel guitar ever made !

Jamie Lennon · Post by **Jamie Lennon** » 13 Jul 2009 1:38 pm

any more ???

Jack Dougherty · Post by **Jack Dougherty** » 13 Jul 2009 2:49 pm

Cameron Tilbury · Post by **Cameron Tilbury** » 15 Jul 2009 4:05 am

Here's my baby...

and the two of us...

The Steel Guitar Forum

Show off your steel ! (Pros too)

Here are mine

Bump

Showing my picture

SGI Steel Guitar

Mickeys 2 Main Mullen G2's

Mickey's Mullins