| Author |
Topic: Specs and/or source for Zumsteel raise helper springs sought |
John McClung
From:
Olympia WA, USA
|
Posted 14 Jun 2023 11:37 am |
|
Anyone know where I can get a handful of springs to exactly match the ones already on my S12 Zum? TIA! Circa 1991 guitar.
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net |
|
|
|
Cody Stewart
From:
Traverse City Michigan, USA
|
Posted 15 Jun 2023 9:27 pm
|
|
Hey John, Did you contact Bruce? He still has a decent stock of parts and could potentially sell you a new raise helper “spring kit”
Otherwise, the hardware store may be the best option. I’m not sure it your vintage of Zum is similar to the more modern ones, but the adjustable plastics type clips that go through the comb bracket to quickly adjust spring tension can be purchased from Granger or Uline under bag ties.
If you’re just looking for one spring, something close to original from hardware should get you by just fine. Give me a call sometime if want advice on setting the timing on those springs for stabilizing the finger assembly. I’ve gotten pretty good at doing that.
All best,
CS
_________________
Bolt On’s: Red Belly, Brown Belly, 73 Sho~Bud Pro~II, Fender’s/Peavey’s. If it doesn't sound like 1968, then I probably won’t like it. |
|
|
|
Wayne Brown
From:
Bassano, Alberta, Canada
|
Posted 16 Jun 2023 4:49 am steel guitar parts
|
|
John do you have a picture you could share...we have a lot of springs we cannot identify....and maybe...
thanks
wayne
_________________
Owner Out West Music,Seats,Parts and accessories
www.outwestcountry.ca |
|
|
|
John McClung
From:
Olympia WA, USA
|
Posted 16 Jun 2023 8:13 am
|
|
Cody, thanks for the tip. I checked PSGParts.com, no Zum springs listed there. I'll give Bruce a call.
Here's pic of the existing springs on my Zum S12. All strings get raised except string 7 in my current setup:
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net |
|
|
|
John McClung
From:
Olympia WA, USA
|
Posted 16 Jun 2023 8:20 am
|
|
Cody, thanks for the tip. I checked PSGParts.com, no Zum springs listed there.
Here's pic of the existing springs on my Zum S12. All strings get raised except string 7 in my current seetup:
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net |
|
|
|
Jon Light
From:
Saugerties, NY
|
Posted 16 Jun 2023 9:01 am
|
|
John -- this is a Williams raise helper spring. I don't have any extra but if it matches, you can source it.
 |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 16 Jun 2023 9:33 am
|
|
I took several off an 81 Zum but I don't know if they're the same or if I still have them. I'll let you know if I do.
Those nylon attachments are available several places. They are called beaded zip ties or ball knot ties. |
|
|
|
Wayne Brown
From:
Bassano, Alberta, Canada
|
Posted 18 Jun 2023 2:33 am steel guitar parts
|
|
Thanks for the picture John ...any chance you can get a closed measurement like Jon did...it would give me a starting point as we have a lot....a lot of springs  Also they look roughly like just a return springs... carter uses the same looking spring but i'll check. Jon's measurements against the new Carter springs I have here.
Also Thanks Jon, nice to see my calipers at works again LOL
thanks
wayne
_________________
Owner Out West Music,Seats,Parts and accessories
www.outwestcountry.ca |
|
|
|
Wayne Brown
From:
Bassano, Alberta, Canada
|
Posted 19 Jun 2023 4:15 am steel guitar parts
|
|
Well i have a few MSA springs here and they seam to measure out at 5/16 wide and about 1 5/8 long...the Carter ones measure out just under 5/16 and about 1 1/2 long...i also have a ton of sho-bud that i still have to go through...but it gives you an idea
thanks
wayne
_________________
Owner Out West Music,Seats,Parts and accessories
www.outwestcountry.ca |
|
|
|
Jerry Jones
From:
Franklin, Tenn.
|
Posted 19 Jun 2023 4:56 am
|
|
From my Zum:
1.5 overall length (outside hook to outside of hook)
.250 diameter
.029 wire diameter
_________________
Jerry Jones |
|
|
|
