| Author |
Topic: Quilter Blockdock retaining plate screws |
Roger Crawford
From:
Griffin, GA USA
|
Posted 25 Mar 2023 8:47 am |
|
In reading up on the Quilter TT12 combo (yeah, I just bought one), it was mentioned that it would be great if the thumbscrews for the retaining plate were captive. This probably isn't a big enough issue to be addressed by Quilter. However, for $1.50, you can get e clips that will hold the thumbscrews captive. Takes less than two minutes to install and no chasing or losing the thumbscrews!
 |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 25 Mar 2023 1:39 pm
|
|
When I first got mine I took the amp out and set it on top of the speaker cabinet. That turned into a hassle and extra time at packing up time. I now leave it in the amp cabinet and eliminate that.
_________________
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit |
|
|
|
David Wren
From:
Placerville, California, USA
|
Posted 26 Mar 2023 7:08 pm
|
|
Hmmmmmm, Roger I think you may have hit on something...
this weekend I checked my mounting screws on my Quilter TT-15... and they had loosened somewhat.
Nice tip!
_________________
Dave Wren
'96 Carter U12,7X7; 1936 7 string National; Line 6 HX Stomp; Quilter TT-15/TB202; Quilter "Steelaire"; DV Mark "GH 250"with 15" 1501 BW; Boss "Katana" 100 Head w/Line 6 Cab; Telonics VP. |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 27 Mar 2023 2:21 am
|
|
| David Wren wrote: |
Hmmmmmm, Roger I think you may have hit on something...
this weekend I checked my mounting screws on my Quilter TT-15... and they had loosened somewhat.
Nice tip! |
I find the screws will loosen just sitting. As previously stated I don't take the amp out and the screws will still loosen slightly. I also bought slightly longer screws when I first got it (when I was taking it out) as the original screws were hard to start because of length. I'll have to research the longer screws as I bought them on Amazon a couple years ago.
Update: Here is the longer screws on Amazon https://www.amazon.com/gp/product/B00A9NI2AI/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&psc=1
_________________
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit |
|
|
|
Doug Beaumier
From:
Northampton, MA
|
|
|
|
Dale Rottacker
From:
Walla Walla Washington, USA
|
|
|
|
