| Author |
Topic: Emmons all-pull split-tuning procedure? |
Roger Rettig
From:
Naples, FL
|
Posted 4 Nov 2022 4:31 am |
|
I used to have several copies of the factory-issued instruction sheet; now I can't find one.
I almost remember the steps but I've run into trouble on my 5th string since I removed the B to A lower the other day.
Does anyone have a copy they could scan and share, please? |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 4 Nov 2022 7:00 am
|
|
Tune open string at keyhead
Tune raise normally @ R endplate
Tune split w raise and lower engaged w original lowering hex
Tune final lower w allen screw behind changer
Just remember - this only works if you're not lowering the string twice (ie-5th string to a Bb and an A. If you are lowering it twice you need an additional rod). |
|
|
|
Roger Rettig
From:
Naples, FL
|
Posted 4 Nov 2022 8:44 am
|
|
Thanks, Jim!
That was the problem - I was lowering 5 to an A using an extra rod (LG only has two lowers), but I moved the LKV to raise the 6th a whole step. I backed off that third rod that facilitated the two lowers. After I'd done that, the split-tune on my B to Bb and A pedal had become out of tune.
Fixed now, thanks to you. I'll remember that sequence. 
I'll leave that redundant rod there in case I change my mind, but I doubt I will. |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 4 Nov 2022 9:18 am
|
|
The procedure Jim posted, tuning the lower split first, is also the written procedure on a Zum, and probably others.
I had tunable splits on my Franklin (5th and 6th strings) with stop screws, like the Emmons and others, (only Franklin with the screws). I could tune the split first or the full lower first, made no difference.
_________________
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit (for sale) |
|
|
|
