Thomas Parts

winston · From: Frankfort, Kentucky 40601

I am looking for some Thomas changer rods if anyone has some. I need 24" and longer and have a slot in the bellcrank end for a cotter pin. Would take some shorter ones also. These rods are smaller in diameter than shobud or msa. thanks Winston May

winston · From: Frankfort, Kentucky 40601

OK does anyone know where to buy .095 rods 24-30 inches long so I can make my own rods. thanks winston may

Richard Sinkler · From: aka: Rusty Strings -- Missoula, Montana

That is standard 3/32" rods used by many builders. When I re-rodded my Carter, I bought 3/32" stainless welding rod through Amazon. You might visit some local welding shops and see what they have. You could also try Michael Yahl at psgparts.com . Or even some of the current builders and see if they will sell you some. You will probably have to drill and tap them yourself.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 54 years and still counting.

winston · From: Frankfort, Kentucky 40601

Thanks Richard, I never thought of Amazon. winston may

Richard Sinkler · From: aka: Rusty Strings -- Missoula, Montana

Jerry Overstreet · From: Louisville Ky

Sent a message Winston.

Forum Index > Wanted To Buy		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: