The Steel Guitar Forum Store 

Post new topic Making a Custom Fret Board
Reply to topic
Author Topic:  Making a Custom Fret Board
Bobby D. Jones

 

From:
West Virginia, USA
Post  Posted 30 Jun 2022 9:13 pm    
Reply with quote

Fretboards can be made easy if you have a fretboard of proper size for a pattern.

Cut a piece of thin plexiglass to match the neck.

Smooth and polish the sides and changer end edges of the plexiglass.

Lay the plexiglass on top of the fretboard being copied [b]upside down[/b]. And tape fast so it will not move.
Carefully masking tape both sides of each fret, And fill area between each fret. Tape edges carefully with masking tape. If you want fret markers to match frets cut out the pattern you choose.
Spray paint the frets and fret markers with color you choose. When paint is dry remove all tape.
Retape edges and spray background color on fret board. When paint is dry remove tape.

Turn fretboard over and secure to neck with screws or glue.




By doing the painting on the bottom of the fret board the plexiglass protects paint from scratching. These fretboards was made in 1970.
View user's profile Send private message Send e-mail

Mike Neer


From:
NJ
Post  Posted 10 Feb 2024 7:40 pm    
Reply with quote

Bobby, thanks for posting this. I found the thread in a search for “custom fretboards”.
I’m going to try and make a custom fretboard for one of my steels based on the microtonal 22 shrutis of Indian music. I will have to do the calculations for the fret markers. Will let you know how it turns out.
_________________
http://www.steelinstruction.com/
http://mikeneer.com
View user's profile Send private message Send e-mail Visit poster's website

Per Berner


From:
Skövde, Sweden
Post  Posted 10 Feb 2024 10:39 pm    
Reply with quote

Or just print your design on paper, and place transparent plexiglass on top.
View user's profile Send private message Send e-mail Visit poster's website

Chris Lucker

 

From:
Los Angeles, California USA
Post  Posted 18 Feb 2024 5:41 pm    
Reply with quote

Or do what Wright did and cut a piece of black/white/ black mica to the fretboard shape you want and cut through the black top to reveal the white where you want frets. To make fret markers, Wright sharpened a piece of metal tube, mounted in his drill press and made white circles where he needed fret makers.
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars.
View user's profile Send private message Send e-mail

Rob Segal

 

From:
New York NY
Post  Posted 21 Feb 2024 7:26 pm     Custom Fretboards
Reply with quote

Mike, Jim Palenscar has made several for me, glossy black background and polished aluminum fret lines and markers. Try him -- Rob
_________________
Rob Segal
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP