| Author |
Topic: GLe 66 |
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 24 Apr 2021 2:32 pm |
|
my question is i changed pickups went to a Gle66 my sd10rp had a single coil in it do i use the 2 springs on the GLe66 that were on the single coil? thanks really need help.
_________________
Mike Bowles |
|
|
|
Tucker Jackson
From:
Portland, Oregon, USA
|
Posted 24 Apr 2021 4:56 pm
|
|
| Mike, I would use the springs. Otherwise, the pickup might drop to the bottom of the cavity, even though you were trying to adjust it to sit higher. |
|
|
|
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 25 Apr 2021 8:55 am GLe 66
|
|
THANKS Tucker it has 2 screws that stick down should i clip them off
Thanks Tucker it has 2 screws sticking down should i clip them off?
_________________
Mike Bowles |
|
|
|
Tucker Jackson
From:
Portland, Oregon, USA
|
Posted 25 Apr 2021 7:10 pm
|
|
Sorry, Mike, I don't quite understand what screws you're referring to.
A common way to do it is to put the springs around the screws that mount the pickup to the guitar. When you unscrew them to raise the pickup, it's the springs that provide the tension to push it upward. |
|
|
|
