| Author |
Topic: Korg GA Handheld Tuner |
Jeremy King
From:
Rochelle, GA, USA
|
|
|
|
Bill Ferguson
From:
Milton, FL USA
|
Posted 14 Apr 2021 5:41 am |
|
If there is a way to see the hertz numbers so that you can tune your offsets to match a tuning chart, it will be great.
I used a Korg with needle for many years. Once I memorized the tuning of each string and pedal, it worked as well as anything out there and cheap, small and last forever. I still have 2 in my stash.
_________________
AUTHORIZED George L's, Goodrich, Telonics and Peavey Dealer: I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables, Goodrich Baby Bloomer and Peavey Nashville 112. Can't get much sweeter. |
|
|
|
Tommy Mc
From:
Middlesex VT
|
Posted 14 Apr 2021 3:09 pm
|
|
Just my observation here, but it looks like this tuner will be less than ideal for "sweetened" tunings. As far as I can see (I checked the owners manual online) the display doesn't show lines that correspond to Hertz numbers. The accuracy is +-0.1% tuning straight up, but any offsets will be guesswork.
The best way I've found using similar tuners is to use the Calibration button to tune offsets. This tuner has a reference calibration between 436 and 445 Hz. Each Hz represents *approximately* 4 cents. For instance, to tune your G# to the Newman offset of -13 cents, setting the calibration to 437 should get you in the ballpark. Kind of clunky because you need to change the calibration several times to tune, and of course, bring along a cheat sheet.
I used the above method with Korg tuners for years until I discovered the free phone app Pitchlab Pro. You can program precise offsets into it. Of course, now that I have a Peterson, there's no looking back..... |
|
|
|
