| Author |
Topic: BL pickups for Legrande 2 1994 |
Bart Vervaeck
From:
Belgium
|
Posted 12 Apr 2021 11:35 pm |
|
Hi all,
Is it true that some Bill Lawrence 705 are too big/too high to mount on an Emmons LL2? I was told that the space between PU and strings is too little with BL 705's causing the strings to get out of tune because of the magnetics of the PU.. If that is true, how could it be solved?
Thanks! |
|
|
|
John Swain
From:
Winchester, Va
|
Posted 13 Apr 2021 4:59 am
|
|
| I may be wrong, but I think that problem is only with the Legrande lll. 710s fit in my 93 Legrande |
|
|
|
Bob Hoffnar
From:
Austin, Tx
|
Posted 13 Apr 2021 5:00 am
|
|
Bart,
The legrand III’s with the counterforce have an issue with pickups not fitting. I think a 705 should fit into a legrand II. I haven’t put a 705 in a legrand II myself so I could be wrong though.
Also the magnetic force of a pickup does not affect intonation at all. So don’t worry about that one.
_________________
Bob |
|
|
|
Norman Evans
From:
Tennessee
|
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 13 Apr 2021 5:44 am
|
|
That video seems overly complicated. The original 705's that were on my Franklin had a (wide mount) mounting plate attached (with four holes for the mounting screws). I swapped the 705's with 710's which also came with the wide mount plate.
A friend installed the 705's in his LLII steel and didn't have any problems (that he mentioned) and didn't have to disassemble the necks like the video.
_________________
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit |
|
|
|
Bob Hoffnar
From:
Austin, Tx
|
Posted 14 Apr 2021 6:44 pm
|
|
| Jack Stoner wrote: |
That video seems overly complicated. The original 705's that were on my Franklin had a (wide mount) mounting plate attached (with four holes for the mounting screws). I swapped the 705's with 710's which also came with the wide mount plate.
A friend installed the 705's in his LLII steel and didn't have any problems (that he mentioned) and didn't have to disassemble the necks like the video. |
Jack, I’m with you that. I have put a lot of pickups in different steels and never went to all that trouble.
_________________
Bob |
|
|
|
J Hollenberg
From:
Vlaardingen, The Netherlands
|
Posted 16 Apr 2021 5:06 am
|
|
Fits perfectly in a Lashley LeGrande from 1993
_________________
Sjaak Hollenberg
Emmons Lashley LeGrande SD10 from 1993 |
|
|
|
Gene Tani
From:
Pac NW
|
Posted 17 Apr 2021 12:38 pm
|
|
I measured a few if you can measure the cavity or the pickup that's in there now. The 710's and 16s had various thickness baseplates and the new ones have pole pieces going thru baseplate, I don't know if 705's have any changes like that
https://bb.steelguitarforum.com/viewtopic.php?p=2947044#2947044
_________________
- keyless Sonny Jenkins laps stay in tune forever!; Carter PSG
- The secret sauce: polyester sweatpants to buff your picks, cheapo Presonus channel strip for preamp/EQ/compress/limiter, Diet Mountain Dew |
|
|
|
Tommy Shown
From:
Denham Springs, La.
|
Posted 20 Apr 2021 12:54 pm
|
|
| I have a 705 on my Lashley LeGrande III. And it fit perfectly in its place. |
|
|
|
