| Author |
Topic: My new project |
Jimmy Gibson
From:
Cornwall, England
|
Posted 19 Jul 2020 1:49 pm |
|
Not sure if anyone is interested in my new project,I recently picked up this stunning looking Springfield D10 and ,at the moment it has 3x4,but over the next few weeks I am going to put the undercarriage back to original,a previous owner removed all the original parts from under the steel and put a different pull system on,but it is ok and plays quite well,but is hard to adjust the tuning as it is,so I think it will be better with all the original parts,and luckily all the original undercarriage came with it,pedals bellcranks ect,The System is very similar to the Blanton steel,
JG
 |
|
|
|
Ross Shafer
From:
Petaluma, California
|
Posted 19 Jul 2020 5:19 pm
|
|
| Cool steel! Under the skirt shots please! |
|
|
|
Larry Dering
From:
Missouri, USA
|
Posted 19 Jul 2020 6:05 pm
|
|
| Good looking steel. Love that headstock. |
|
|
|
Jimmy Gibson
From:
Cornwall, England
|
Posted 19 Jul 2020 10:03 pm Underbelly pics.
|
|
Hi Ross,thanks for your interest and ,I will upload a couple of pictures of the underside as it is now,and when it has been put back to the original.
JG.. |
|
|
|
Jimmy Gibson
From:
Cornwall, England
|
Posted 21 Jul 2020 2:15 am Pics
|
|
Here are the pictures of how it came to me,as I said it plays pretty good,but is a bit awkward to tune .
JG.
 |
|
|
|
Bob Carlucci
From:
Candor, New York, USA
|
Posted 21 Jul 2020 4:47 am
|
|
Strange.. Square cross shafts, yet I see some MSA looking bellcranks, and Bud barrels and round pullers...
Looks like someone put it together at some point using whatever good quality parts they could acquire... It certainly is not cobbled together, and looks well done.. Not familiar with the Springfield brand.. Is it a European built guitar?........ bob
_________________
I'm over the hill and hittin'rocks on the way down!
no gear list for me.. you don't have the time...... |
|
|
|
Jimmy Gibson
From:
Cornwall, England
|
Posted 21 Jul 2020 5:40 am Hi Bob
|
|
Hi Bob it’s been a while,hope you are keeping well and keeping safe,the steel was made in the UK by a guy called James Kerr,and you are correct the chap who had it before me used all good quality parts he even replaced the original wooden necks for Mullen aluminium necks,and the steel looks stunning,and as I said it played pretty good,but is was a bit fiddly to tune because the Sho-Bud barrels are a little hard to turn to tune the lower strings.
Take care .
Jimmy. |
|
|
|
