| Author |
Topic: Harlin Brothers Multi-Kord Adjustment Tool |
Allen Hahn
From:
Washington DC, USA
|
Posted 9 Aug 2020 1:18 pm |
|
I have a 6-string, single neck Multi-Kord. Am trying to tune it. I can do it by hand with a screwdriver of course, but would like to obtain the tool specifically designed for tuning the pedals (adjusting the little screws on the metal bars that raise/lower the strings, then locking the nuts under the screws) that Harlin Brothers supplied with the instruments. Anyone have one they would wish to part with?
Best wishes,
Allen |
|
|
|
C Dixon
From:
Duluth, GA USA
|
Posted 10 Aug 2020 10:53 am
|
|
deleted
_________________
A broken heart + †= a new heart.
Last edited by C Dixon on 5 Sep 2020 5:37 am; edited 1 time in total |
|
|
|
Burnell Groft
From:
Pennsylvania, USA
|
Posted 19 Aug 2020 3:37 pm Special Screw Driver
|
|
| He needs that special screw driver that has the nut tightener right on the screw driver.The raise and lower screw are on the same bar there are 12 offset screws six to raise and six to lower. press the pedal down then turn the screw to the right pitch then tighten the nut to secure the screw. |
|
|
|
