| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Evans Amps!
Reply to topic
Author Topic:  Evans Amps!
Steven Pearce


From:
Port Orchard Washington, USA
Post  Posted 11 Sep 2019 9:20 am    
Reply with quote

A few months ago, I saw a used Evans SE 200 with a 15 in it. It’s a 2005 model.
I hadn’t ever seen one in person...I had just come from a rehearsal and
had my lap steel with me. Well I had to try it out.
SO after 30+ years of Peavey amps, I plugged in the Evans.
And was I surprised. There was no harsh frequency anywhere. It
was the sound I was looking for. Since then I’ve played small clubs,
as well as a few outdoor shows, really big stages and grounds.
To me, it was the best ever. I AM NOT talking bad about my
Peaveys, they never let me down. But if you ever cross paths
with an Evans, just give it a try. IMHO and to my ears, it’s great.
Thanks,
Steve Pearce
ps, I been 35 years with the same band so they know my sound, they
all were grinnin after hearing the Evans.
_________________
http://www.fentonstwang.com/fr_home.cfm
View user's profile Send private message Send e-mail Visit poster's website
Barry Coker


From:
Bagley Alabama, USA
Post  Posted 11 Sep 2019 12:13 pm     Evans Amp
Reply with quote

I picked up an Evans BE-200 a few months ago 200 watts, 26 lbs. and a 10" speaker. This Little Brute can hold its own with any amp. Clean with lots of head room and weighs less than my Pack a Seat. I love mine.

Barry
_________________
Williams 400 SD-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!!
View user's profile Send private message Send e-mail
Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 11 Sep 2019 2:34 pm    
Reply with quote

Welcome to the Fraternal Order of Evans Owners.
_________________
Lee, from South Texas - Down On The Rio Grande

There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.


Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat
View user's profile Send private message Send e-mail
George Kimery


From:
Limestone, TN, USA
Post  Posted 11 Sep 2019 9:17 pm     Evans amps
Reply with quote

I had an Evans FET 500 I used for 20 years. Then over the years I have had every steel amp Peavey has made (except the new Session 115). a Steel King, a Twin Reverb, Mesa Boogie, Carvin BX 500, Steelaire, Katana, and a Webb. About two years ago, I got a Stereo Steel rack system, which beat all the others hands down. Then about a year ago, I added an Evans stereo pre-amp to the rack and ran it through the power amp section of the Stereo Steel. The Evans edges out the Stereo Steel, but not by a lot. There is times when a combo amp works out better and for backup, so this past Sunday, I picked up an Evans SE 200 on the way home from the Nashville Super Jam. It sounded great as expected, but not as good as the Evans in my rack system, which was running through a JBL D-130 speaker. The SE 200 had an Eminence Delta Lite speaker. I replaced the Delta Lite with a JBL D-130 which to my ears, really sweetened up the sound and made it sound as good as the rack version. The downside is I added about 1O LB of weight. I have read that an Eminence EPS 15 sounds the same as a JBL. I would like to try one due to their lighter weight and higher power rating. Bottom line, having owned just about everything (except the high end stuff like Milkman, Little Walter, Telonics, etc which I can't afford) for me, Evans is the cat's meow.
View user's profile Send private message Send e-mail
Tom Campbell


From:
Houston, Texas, USA
Post  Posted 12 Sep 2019 5:39 am    
Reply with quote

Hi Steve,

Same experience. Picked up an Evans SE-200 and never went back to the NV's. I tweak it (Evans) with a Freeloader that I had in my "inventory", but it doesn't really need it.
View user's profile Send private message Send e-mail
Tony Edwards


From:
Six Mile, South Carolina
Post  Posted 12 Sep 2019 8:06 am     Evans Amps
Reply with quote

I have an Evans SE200 which has the DPU (Digital Power Unit) and it sounds great. The only thing I would like better would be the SE300 (and there is one on the forum for sale) or maybe even the SE500 if I could afford one, but it is out the top at over $1700. Evans is a great amp, whether it be the pre-amp or rack mount amp or the combo.
_________________
CLR Custom 3x5 Pedal Steel, Quilter Steelaire Rackmount Pro w/ Telonics Ext. Cab, Evans SE-200 w/ Little Walter Ext. Cab, Goodrich L-120, Frenchy's Steel Mill Strings and tuning wrench, Ben's Tone Bar, Ibanez Delay/Echo, George L's Cables.
View user's profile Send private message Send e-mail
John Lacey


From:
Black Diamond, Alberta, Canada
Post  Posted 12 Sep 2019 10:44 am    
Reply with quote

I’ve got an older SE200 that I’ve put in a replacement EPSc 15” speaker in. Pretty happy with the sound except combined with my Zumsteel Hybrid and its wallace single coils the high end is a little much. Have to really watch the treble and push the body up sometimes.
View user's profile Send private message Send e-mail
Steven Pearce


From:
Port Orchard Washington, USA
Post  Posted 12 Sep 2019 9:53 pm    
Reply with quote

John, you’re right about the treble. Set at 2 gives me all I need.
I found that the Bass and Body kind of work together..
more bass, less body...less bass, etc..
I found my settings, wrote em down and I don’t mess with em.
Steve
_________________
http://www.fentonstwang.com/fr_home.cfm
View user's profile Send private message Send e-mail Visit poster's website
George Kimery


From:
Limestone, TN, USA
Post  Posted 13 Sep 2019 1:28 am     Evans amp!
Reply with quote

My stereo rack mount is on the bright side. The variable Z on my Black Box more than takes care of it. The Black Box has a Free Loader built in. My SE 200 has no issue with the highs at all. I have the treble on 5.
My guitar is a 1982 Zum with the original single coil pickups. The previous owner sold it because it was too bright. It appears your pickup can make a world of difference.

How do you guys have the expand and depth knobs set?
View user's profile Send private message Send e-mail
John Lacey


From:
Black Diamond, Alberta, Canada
Post  Posted 14 Sep 2019 10:57 am    
Reply with quote

I usually leave the expand knob off and the depth around 6 or 7.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron