The Steel Guitar Forum Store 

Post new topic Major to Minor tab
Reply to topic
Author Topic:  Major to Minor tab
Bruce W. Roberts

 

From:
Indiana, USA
Post  Posted 18 Jul 2019 6:26 am    
Reply with quote

Standard E9 tuning. Looking for a couple of ways to transition from a root chord (say C) to the minor (Am). So a simple stepping into the minor to provide a fluent change if that makes sense.

Thanks in advance and love this forum.
View user's profile Send private message Send e-mail

Brian Hollands


From:
Geneva, FL USA
Post  Posted 18 Jul 2019 6:49 am    
Reply with quote

This will probably help
https://bb.steelguitarforum.com/viewtopic.php?t=147199&highlight=chart
charts like these show chord positions at each fret using standard grips (there are other non-standard grip chords available).
In your example, from the no pedals position, the relative minor chord is gotten by adding the A pedal.
B&C give you the ii (only on strings 3,4,5,6,7) and lowering the E's gives you the iii.
From pedals down (C at the 3rd Fret) the relative minor is on the B&C pedals - kind of hard to do when you're already on A&B. Easier would be to release A&B (Cmaj at 3rd) and drop back two frets while lowering the E's.
_________________
'81 Sho-bud LDG, 2 EMCI's
View user's profile Send private message Send e-mail

Bruce W. Roberts

 

From:
Indiana, USA
Post  Posted 18 Jul 2019 7:07 am    
Reply with quote

I do have that chart. It is great. What I am looking for is playing a transition, in other words moving from the C chord to the A minor if that makes sense.
View user's profile Send private message Send e-mail

Fred Treece


From:
California, USA
Post  Posted 18 Jul 2019 7:55 am    
Reply with quote

Bruce W. Roberts wrote:
I do have that chart. It is great. What I am looking for is playing a transition, in other words moving from the C chord to the A minor if that makes sense.

If you are looking for a transition chord to put between C and Am, G or E will work. G is the V chord of C, and E is the V of Am. That’s why they resolve to Am nicely. You could also use E7+ (augmented), or G#dim. The fluidity of the transition depends on which Am voicing (or “grip”) you want to end up on. Some of the voicings for G or E may not be on the same strings you want to slide into for the Am.

The easiest transition chord would probably be a Cmaj7.

There’s also the C augmented (which is also Eaug) chord that will get you to Am. In no-pedals, fret 8, from any C chord grip, half-pedal A for Caug, then full pedal for Am.

If you are looking for tab examples, contact forumite Dick Sexton. He has over 400 free tabs of every lick he has ever played. I’m sure he has one that goes from C to Am.

If you meant something else, never mind the preceding gibberish 🤪
View user's profile Send private message Send e-mail

Bengt Erlandsen

 

From:
Brekstad, NORWAY
Post  Posted 18 Jul 2019 10:28 pm    
Reply with quote

There are several ways to go from C to Am.
C -> Caug -> Am (actually only the G note going G G# A)

C -> Bdim -> Am
C -> F -> Am
C -> Dm -> Am
C -> G#dim -> Am

Try exploring stuff around the 3rd fret w A+B pedals
Play strings 4 and 5 for the C
while those strings are ringing, slide back one or two frets, pick strings 5&6 and slide back up to 3rd fret, finish w the 7th string for the A note at 3rd fret.

Or a little more "what the ?"
Step 1: play 3rd fret(no pedals)strings 4 and 5 and squeeze A pedal
Step 2: play 3rd fret (no pedals) strings 4 and 5
Step 3: play 3rd fret w E-F lever strings 4 & 5 and slide to 5th fret while releasing the E-F lever

Step 3 is implied E7 to Am


B.Erlandsen
View user's profile Send private message


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP