| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Session 500 N400 tandem
Reply to topic
Author Topic:  Session 500 N400 tandem
Patrick Huey


From:
Nacogdoches, Texas, USA
Post  Posted 9 May 2019 4:41 am    
Reply with quote

I have a Session 500 and a Nashville 400 with a Profex II and Fuhrman power conditioner in the rack, and use a Goodrich L120 volume pedal. How would I best hook the herd together so as to use both amps in stereo? Thanks folks!
_________________
Pre RP Mullen D10 8/7, Carter S-10 3/4, previous Cougar SD-10 3/4 & GFI S-10 3/2, Peavey Session 500, previous Peavey Nashville 400, Boss DD-5, Hilton Digital Sustain, '88 Les Paul Custom, Fender Stratocaster, Takamine acoustics, Marshall amps, Boss effects, Ibanez Tube Screamer, and it all started with an old cranky worn out Kay acoustic you could slide a Mack truck between the strings and fretboard on!!
View user's profile Send private message Send e-mail
Richard Sinkler


From:
aka: Rusty Strings -- Oakdale, California
Post  Posted 9 May 2019 5:55 am    
Reply with quote

I would go from guitar to volume pedal, to Profex, and the left and right outputs to the 2 amps.
_________________
CLICK HERE to visit my website with Mickey Adams videos.

Mullen SD12 3p/4k, Carter D10 9p/9k, Peavey Nashville 400 with a BW1502-4, Hilton VP, Tech 21 Roto Choir, Wampler Euphoria, EH Mel9, Zoom MS50G
View user's profile Send private message Send e-mail Visit poster's website
Dennis Detweiler


From:
Solon, Iowa, US
Post  Posted 9 May 2019 6:25 am    
Reply with quote

Yikes! Hefty herd! Makes my joints crack just thinking about it. Best to have one on each side of the stage to keep the stage from flipping over. Laughing
As Richard said. Plus, might have to add a two prong adapter to one amp to lift ground if you get hum from the ground loop between amps.
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation Preamp, TC Electronic M-350 Processor, Crown XLS 1002 Stereo Rack Head, 15" Eminence EPS-15C, ShoBud Pedal, 1949 Epiphone D-8. And, too much extra gear.
View user's profile Send private message Send e-mail
Patrick Huey


From:
Nacogdoches, Texas, USA
Post  Posted 9 May 2019 8:03 am    
Reply with quote

Dennis Detweiler wrote:
Yikes! Hefty herd! Makes my joints crack just thinking about it. Best to have one on each side of the stage to keep the stage from flipping over. Laughing
As Richard said. Plus, might have to add a two prong adapter to one amp to lift ground if you get hum from the ground loop between amps.

Where do I plug into the amps?
_________________
Pre RP Mullen D10 8/7, Carter S-10 3/4, previous Cougar SD-10 3/4 & GFI S-10 3/2, Peavey Session 500, previous Peavey Nashville 400, Boss DD-5, Hilton Digital Sustain, '88 Les Paul Custom, Fender Stratocaster, Takamine acoustics, Marshall amps, Boss effects, Ibanez Tube Screamer, and it all started with an old cranky worn out Kay acoustic you could slide a Mack truck between the strings and fretboard on!!
View user's profile Send private message Send e-mail
Dennis Detweiler


From:
Solon, Iowa, US
Post  Posted 9 May 2019 8:08 am    
Reply with quote

Into the front inputs. There's two on each amp. I'd use the left #1 input on each.
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation Preamp, TC Electronic M-350 Processor, Crown XLS 1002 Stereo Rack Head, 15" Eminence EPS-15C, ShoBud Pedal, 1949 Epiphone D-8. And, too much extra gear.
View user's profile Send private message Send e-mail
Mike Brown


From:
Meridian, Mississippi USA
Post  Posted 9 May 2019 1:52 pm     Peavey
Reply with quote

Thanks for the help in replying guys.
View user's profile Send private message
Patrick Huey


From:
Nacogdoches, Texas, USA
Post  Posted 9 May 2019 3:51 pm     Re: Peavey
Reply with quote

Mike Brown wrote:
Thanks for the help in replying guys.

Mike yes thanks everyone! And Mike, its best to run directly into the amps and no need to plug into the effects loop, sir?
Thanks again!
_________________
Pre RP Mullen D10 8/7, Carter S-10 3/4, previous Cougar SD-10 3/4 & GFI S-10 3/2, Peavey Session 500, previous Peavey Nashville 400, Boss DD-5, Hilton Digital Sustain, '88 Les Paul Custom, Fender Stratocaster, Takamine acoustics, Marshall amps, Boss effects, Ibanez Tube Screamer, and it all started with an old cranky worn out Kay acoustic you could slide a Mack truck between the strings and fretboard on!!
View user's profile Send private message Send e-mail
Patrick Huey


From:
Nacogdoches, Texas, USA
Post  Posted 9 May 2019 3:53 pm    
Reply with quote

Dennis Detweiler wrote:
Yikes! Hefty herd! Makes my joints crack just thinking about it. Best to have one on each side of the stage to keep the stage from flipping over. Laughing
As Richard said. Plus, might have to add a two prong adapter to one amp to lift ground if you get hum from the ground loop between amps.

Dennis, I’ve got wheels on everything and a collapsible dolly lol thankfully I don’t move them out of the house much 😁
_________________
Pre RP Mullen D10 8/7, Carter S-10 3/4, previous Cougar SD-10 3/4 & GFI S-10 3/2, Peavey Session 500, previous Peavey Nashville 400, Boss DD-5, Hilton Digital Sustain, '88 Les Paul Custom, Fender Stratocaster, Takamine acoustics, Marshall amps, Boss effects, Ibanez Tube Screamer, and it all started with an old cranky worn out Kay acoustic you could slide a Mack truck between the strings and fretboard on!!
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Support This Forum



BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron