| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic once again, sorry, volume pedal first or delay?
Reply to topic
Author Topic:  once again, sorry, volume pedal first or delay?
Norbert Dengler


From:
germany
Post  Posted 9 Feb 2019 11:59 am    
Reply with quote

this might have been beaten to death, but anyhow, what's your opinion?
View user's profile Send private message Send e-mail
Justin Emmert


From:
Martinsville, VA
Post  Posted 9 Feb 2019 12:05 pm    
Reply with quote

Volume pedal first. Interested to hear other opinions..
View user's profile Send private message Send e-mail
b0b


From:
Cloverdale, CA
Post  Posted 9 Feb 2019 12:08 pm    
Reply with quote

Volume pedal before delay/reverb. I don't know of anyone who does it differently.
_________________
-𝕓𝕆𝕓- (SGF Admin) Bobby Lee β™ͺ @b0blee β™ͺ Copedents β™ͺ Recordings
View user's profile Send private message Send e-mail Visit poster's website
Drew Pierce


From:
Arkansas, USA
Post  Posted 9 Feb 2019 8:03 pm    
Reply with quote

If there's an Izzy or Match Box, that first, then the VP, then FX, then amp. If the amp has an FX loop, I put FX there and go direct to amp from Izzy/MB/VP.
_________________
Drew Pierce
Emmons D10 Fatback, S10 bolt-on, Zum D10, Evans RE500, Hilton volume and delay pedals.
View user's profile Send private message Send e-mail
Ian Rae


From:
Redditch, England
Post  Posted 10 Feb 2019 1:35 am    
Reply with quote

The volume pedal is part of the instrument. You wouldn't put anything between the fiddle and the bow.

The obvious exception is a matching device, which would be like the rosin.
_________________
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics mini rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website
Richard Sinkler


From:
aka: Rusty Strings -- Oakdale, California
Post  Posted 10 Feb 2019 7:05 am    
Reply with quote

I put my reverb/ delay in the effects loop of my amp. If it didn't have an effects loop, I would run it after the volume pedal so the volume pedal wouldn't cut off the tails or slap backs when backing the volume pedal down to decrease volume.

A good rule of thumb that I keep seeing is, time altering devices (delay, verb, etc...) should be right before the amp (or in the fx loop). Pedals that react to picking attack (distortion, envelope filter/auto-wah, etc...), before the volume pedal.
_________________
CLICK HERE to visit my website with Mickey Adams videos.

Mullen SD12 3p/4k, Carter D10 9p/9k, Peavey Nashville 400 with a BW1502-4, Hilton VP, Tech 21 Roto Choir, Wampler Euphoria, EH Mel9, Zoom MS50G
View user's profile Send private message Send e-mail Visit poster's website
Mark van Allen


From:
Watkinsville, Ga. USA
Post  Posted 13 Feb 2019 3:39 am    
Reply with quote

Usually, I’d suggest what Richard says. These are tools, though, so it’s what you want them to do. Some Fuzz, OD, Auto-wah, etc. pedals sound really cool with the ability to change how hard you hit them ( after the VP) Generally I would think most people want to hear the tail on reverb or delay trail off in a natural way, so after VP. But experimentation might give you a whole new sound!
_________________
Stop by the Steel Store at: www.markvanallen.com
www.musicfarmstudio.com
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Support This Forum



BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron