| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic String gauges, tension and tone
Reply to topic
Author Topic:  String gauges, tension and tone
Mike Harris


From:
Texas, USA
Post  Posted 1 Feb 2019 11:12 am    
Reply with quote

I just expanded from a Dynalap S-8 to a Fender T-8 (24.5" scale). I am trying to figure out which strings to buy for C6th (low A, high G) and A6th (low F#, high E) tunings. The gauges given on Cindy Cashdollar's web page tend to be heavier than SIT sets and other recommended gauges. Is it simply a matter of personal preference--tight and strong versus loose and twangy? I've got to get 3 sets so I'd like to get it as right as I can the first time. Any advice appreciated. Thanks.
View user's profile Send private message Send e-mail
Douglas Bryant


From:
California, USA
Post  Posted 1 Feb 2019 5:37 pm    
Reply with quote

This might help .....

https://www.hawaiiansteel.com/learning/gauges.php
View user's profile Send private message Send e-mail
Nic Neufeld


From:
Kansas City, Missouri
Post  Posted 1 Feb 2019 6:42 pm    
Reply with quote

I think if you're going for a high G C6, given that you are looking at an 8 string tuning, it might be easy enough to just to get an 8 string C6 with high E set, and add a .012 plain steel (or whichever everyone deems best) to add to it for the high G.

SIT has a good collection of reasonably priced string sets for 8 string including C6, A6, E13, etc.:
https://sitstrings.com/products/pedal-steel-lap-steel/non-pedal-lap-steel

Lately I've been mostly sticking with John Pearse sets to get B11 and C13 with the deep low tuned B and C...
_________________
Waikīkī, at night when the shadows are falling
I hear the rolling surf calling
Calling and calling to me
View user's profile Send private message Send e-mail
Peter Jacobs


From:
Northern Virginia
Post  Posted 2 Feb 2019 2:10 pm    
Reply with quote

I think it’s really personal preference. I don’t want the strings to be too loose and floppy, but I don’t want to be playing on telephone cables, either. On the wound strings, especially the lowest ones, I’ll check how easy it is to push them near the fretboard - one size up or down can make a big difference. Same with “thuddiness” — if the lowest string is too heavy, it may not ring as much as I want it to. Like most things, it’s a trade off...
_________________
Peter
---------
www.splinterville.com
YouTube: https://goo.gl/tbM7Zo
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron