| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Need a tech to check out my NV400
Reply to topic
Author Topic:  Need a tech to check out my NV400
Tim Harr


From:
Dunlap, Illinois
Post  Posted 29 Jan 2019 11:05 am    
Reply with quote

Hi guys -

Pulled out a NV 400 of mine and was surprised to hear that there is a a distortion that shouldn't be there. A low end, airy thud type distortion. Was first thinking it might be the speaker... the reverb tank has been removed.
I have troubleshooted this thing and have deducted that it is the pre-amp section. I connected another pre-amp to the power amp in on the NV400. Sounds normal.

There are no mods..it is 100% stock.

Either way, I would like to have someone go through it and give it some tech bench love.

Ideally, I would send you the amp itself and leave the cab and speaker here.

Any suggestions on who is the best at this?

Thanks!
_________________
Tim Harr
Mullen G2 D-10 (9/5)

Retired US Army Band (Pedal Steel/Dobro/Guitar)
View user's profile Send private message Send e-mail
Richard Sinkler


From:
aka: Rusty Strings -- Oakdale, California
Post  Posted 29 Jan 2019 11:33 am    
Reply with quote

Send it to Peavey. They are reasonable and quick. Only need to send chassis and reverb spring. Even though you don't use the spring, send it anyway.
_________________
CLICK HERE to visit my website with Mickey Adams videos.

Mullen SD12 3p/4k, Carter D10 9p/9k, Peavey Nashville 400 with a BW1502-4, Hilton VP, Tech 21 Roto Choir, Wampler Euphoria, EH Mel9, Zoom MS50G
View user's profile Send private message Send e-mail Visit poster's website
Pat Moore


From:
Virginia USA
Post  Posted 30 Jan 2019 3:04 am    
Reply with quote

Yep, Peavey! Best bet!
_________________
Emmons D10 SKH, Emmons D10 PP, Emmons ST10 PP
Quilter Steelaire, Peavey Amps, Dodd Princeton Amp
Fender Telecaster
View user's profile Send private message Send e-mail
Bill Ferguson


From:
Norcross, GA USA
Post  Posted 30 Jan 2019 4:46 am    
Reply with quote

Yes, send it to Peavey. Call Mike Brown first and he will arrange "priority" repair.

More than likely it is just a dirty switching jack.

Have you tried using a short patch cable and connecting (on the back of the amp) a cord from the PreAmp out to the Power Amp in. This bypasses the switching jack and if it works, just leave the cable there. Won't hurt a thing.

Also, try plugging your cable from your volume pedal to the amp into the PreEQ Patch IN and see if that helps.

If either one of these work, you can continue to use your amp that way.

If they don't then you probably should send it in.
Take the chassis out and pack it carefully in a Heavy Guage Box, with lots of cushion around the chassis.

Send to:
Peavey Service Center
Attn: Mike Brown
710 A Street
Meridian, MS 39301

Be sure and include a note stating the problem you are having.

Hope this helps
_________________
AUTHORIZED GeorgeL's, Goodrich, Telonics, BJS and Peavey Dealer: 1993 Green Emmons D-10 LeGrande w/ Emmons 108 pickups, 2004 Mahogany Carter D-10 w/ Lawrence XR16 pickups, Goodrich OMNI or Telonics Volume Pedal, George L's Cable & Strings, Peavey Nashville 112 (New Model), Peavey Session 115 (#1) and a Telonics Combo 112
View user's profile Send private message Send e-mail Visit poster's website
Mike Brown


From:
Meridian, Mississippi USA
Post  Posted 30 Jan 2019 9:12 am     Peavey Service Center
Reply with quote

Better yet, I highly suggest that you purchase a can of Peavey Funk Out FIRST! Then spray each input and output jack. Insert a 1/4" plug into each about ten to 15 times and then check for proper operation of the amplifier.
View user's profile Send private message
Jerry Erickson


From:
Atlanta,IL 61723
Post  Posted 1 Feb 2019 8:46 pm    
Reply with quote

Plug a cable into fx send and return jacks and see if the amp sounds normal again. IIRC, there are jacks on the front as well. Do them one at a time.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Support This Forum



BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron