| Author |
Topic: Telonics VP Emmons Push Pull Adaptor |
Bob Snelgrove
From:
san jose, ca
|
Posted 11 Oct 2018 7:57 pm |
|
Who makes them?
bob |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 12 Oct 2018 7:37 am Re: Telonics VP Emmons Push Pull Adaptor
|
|
| Bob Snelgrove wrote: |
Who makes them?
bob |
Hi Bob,
Keith Hilton makes them. They will fit up to either his pedal or the Telonics. I've been using one on my Telonics pedal for years. They are a fixed-pin design but will even work just fine if your Emmons guitar is an early one that's designed for a drop-pin pedal.
You can get one from Keith, of course but I believe Fred Justice and Gary Sill also carry them.
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Corbin Pratt
From:
Nashville
|
Posted 17 Oct 2018 5:54 am
|
|
I second what Lynn said. What tapers do you guys like with your Push Pull? I really enjoy taper 7. The Emmons taper with the extra heat at the end.
_________________
CP in Nashville
Show Pro SD-10, Shaw Amplifiers, Kemper |
|
|
|
Bob Snelgrove
From:
san jose, ca
|
Posted 17 Oct 2018 6:04 am
|
|
Got one coming from Keith. Great service, BTW 
bob |
|
|
|
Bob Snelgrove
From:
san jose, ca
|
Posted 22 Oct 2018 7:34 pm Re: Telonics VP Emmons Push Pull Adaptor
|
|
| Lynn Stafford wrote: |
| Bob Snelgrove wrote: |
Who makes them?
bob |
Hi Bob,
Keith Hilton makes them. They will fit up to either his pedal or the Telonics. I've been using one on my Telonics pedal for years. They are a fixed-pin design but will even work just fine if your Emmons guitar is an early one that's designed for a drop-pin pedal.
You can get one from Keith, of course but I believe Fred Justice and Gary Sill also carry them. |
Lynn,
I got it but don't see how it can possibly work. The back end of the pedal is off the floor because of the base of the TP pedal still contacting the floor first? My front legs only extend the length of the rubber end cap so there isn't enough clearance. Confused
bob
_________________
https://www.youtube.com/watch?v=KRwye98siA4
https://www.youtube.com/watch?v=vZlAdlrRYj0
http://www.reverbnation.com/bobsnelgrove
1978 Crawford Emmons P/P
1976 Tommy White P/P
1986 Franklin D-10 |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 31 Oct 2018 8:38 am Telonics VP Emmons Push Pull Adaptor
|
|
Bob,
I don't quite understand what you've described. Any chance you could post a photo or two of the pedal and the Hilton adapter attached to your steel?
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
