Color-coded tuning nuts- yea or nay? |
Yes |
|
68% |
[ 32 ] |
No, not interesting |
|
21% |
[ 10 ] |
Conditional yes (please comment below) |
|
10% |
[ 5 ] |
|
Total Votes : 47 |
|
Author |
Topic: Colored tuning nuts? |
Dave Stroud
From: Texas
|
Posted 2 Jul 2018 4:56 pm
|
|
Does anyone sell colored tuning nuts to help identify them easier?
Last edited by Dave Stroud on 2 Jul 2018 5:34 pm; edited 1 time in total |
|
|
|
Dennis Montgomery
From: Western Washington
|
Posted 2 Jul 2018 5:09 pm
|
|
Why not just get a few different color permanent sharpies and DIY |
|
|
|
Dave Stroud
From: Texas
|
Posted 2 Jul 2018 5:17 pm
|
|
I thought about that.... But I'd like to have something more presentable. If there's any interest in truly colored nylon tuners, I might make them. Dyes are expensive and it's a bit of a process, but I don't like fidgeting around for the right tuner. It'd be nice to have them color-coded for each pedal or knee lever.
I created a poll to gauge interest. |
|
|
|
Richard Sinkler
From: aka: Rusty Strings -- Missoula, Montana
|
Posted 2 Jul 2018 5:58 pm
|
|
Dennis Montgomery wrote: |
Why not just get a few different color permanent sharpies and DIY |
I did the Sharpie thing when I got my Carter. It was 8p/10k, so there was a whole truckload of them babies. _________________ Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 54 years and still counting. |
|
|
|
Dennis Montgomery
From: Western Washington
|
Posted 2 Jul 2018 7:53 pm
|
|
Just noticed the poll and voted Yes. My Mullen 12 string 7x4 should arrive soon and I think I just might have to break out the sharpies |
|
|
|
Jerry Overstreet
From: Louisville Ky
|
Posted 2 Jul 2018 8:10 pm
|
|
Personally, I wouldn't want them color coded according to lever and pedal, but it would be a really good idea where you have multiple raises or lowers on the same string. Also on unusual or infrequent used ones, say like a split rod tuner.
For people like me that have really loaded up guitars, or Universal tunings, the ability to positively identify a tuner quickly would be nice.
Probably 3 colors would be enough...I think anything more would be confusing.
Just as examples, black for a split rod tuning, red for one of multiple changes such as on the 4th, 5th string raises, and maybe the gray for multiple lowers etc.....or however the player would like to customize their guitar.
But there are so many different i.d.'s and lengths, I don't know if it would be practical to mfg. |
|
|
|
Ian Rae
From: Redditch, England
|
Posted 2 Jul 2018 11:39 pm
|
|
If they were supplied with a pilot hole I'd happily drill them out to the right size. _________________ Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
|
Stu Schulman
From: Ulster Park New Yawk (deceased)
|
Posted 3 Jul 2018 12:48 am
|
|
I use green,red,and black sharpness and usually get a bunch on my fingers. _________________ Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
Ross Shafer
From: Petaluma, California
|
Posted 3 Jul 2018 6:09 am
|
|
"Dyes are expensive and it's a bit of a process"
Look no further than Ritt Dye...cheap and super easy....just boil water. Works on nylon tuners perfectly and the color is permanent. |
|
|
|
Richard Sinkler
From: aka: Rusty Strings -- Missoula, Montana
|
Posted 3 Jul 2018 6:43 am
|
|
I also use sharpies to color the tops of the band on my picks so I can quickly determine which one goes on which finger. _________________ Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 54 years and still counting. |
|
|
|
Dave Stroud
From: Texas
|
Posted 3 Jul 2018 8:41 am
|
|
Ross Shafer wrote: |
Look no further than Ritt Dye...cheap and super easy....just boil water. Works on nylon tuners perfectly and the color is permanent. |
Have you had any issues with fading over time, bleeding when touching the tuners, or getting a nice, deep color?
I ask because only a portion of all-purpose dye is compatible with synthetic fibers like nylon. |
|
|
|
Barry Blackwood
|
Posted 3 Jul 2018 9:02 am
|
|
Seems like a good idea. Maybe one color for raise and another for lower. More would be confusing. |
|
|
|
Dave Stroud
From: Texas
|
Posted 3 Jul 2018 9:51 am
|
|
I really like the idea of just using a color if there's more than one raise or lower on a string. But if one tuning nut is colored, it'd be better to have every tuner associated with that change colored as well.
For simplicity, it also makes sense to give priority to the pedals when assigning colors, and use the same color pattern from left to right on both necks. |
|
|
|
Dennis Montgomery
From: Western Washington
|
Posted 3 Jul 2018 9:55 am
|
|
I'd go for a different color for each pedal and knee |
|
|
|
Dave Stroud
From: Texas
|
Posted 3 Jul 2018 10:03 am
|
|
Dennis, that was what I thought at first, but I think it might be more confusing than having all the knee levers plain. I'll make two comparison images tonight to show what I mean a little better.
Well, actually.... It also depends on your copedent and if you have more tuning nuts on there than usual. I'm not sure about universal copedents. Those might benefit from more colors. |
|
|
|
Dennis Montgomery
From: Western Washington
|
Posted 3 Jul 2018 10:21 am
|
|
That's a good thought...plain is a color too |
|
|
|
Dave Stroud
From: Texas
|
Posted 3 Jul 2018 11:50 am
|
|
Minor side-question.... How long do tuner nuts last with regular use?
I haven't been playing long enough to wear any out. I'm guessing at least a couple decades? |
|
|
|
Jack Stoner
From: Kansas City, MO
|
Posted 3 Jul 2018 12:56 pm
|
|
My Franklin's drop return compensator "tuning" nuts are colored black on the end. Nothing else.
Mike (Martin) Weenik used the Ritt dye to color code the tuning nuts on the guitars he built. _________________ GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit |
|
|
|
Ron Pruter
From: Arizona, USA
|
Posted 3 Jul 2018 2:42 pm
|
|
If you have rod splits, colored nuts are a must. Accidentally turning those is going to mess you up.
BTW...In general, black would look better than white ' cause white get's all dirty looking from the aluminum wrenches rubbing off on them. No, black ones wouldn't sound better!! RP _________________ Emmons SKH Le Grande, '73 Fender P/J bass, Tick tack bass, Regal high strung, USA Nashville 112. |
|
|
|
Ross Shafer
From: Petaluma, California
|
Posted 3 Jul 2018 7:43 pm
|
|
Dave Stroud wrote: |
Have you had any issues with fading over time, bleeding when touching the tuners, or getting a nice, deep color? |
Nope...lots out there on the google |
|
|
|
Ken Metcalf
From: San Antonio Texas USA
|
Posted 4 Jul 2018 5:58 am
|
|
Just compensators. |
|
|
|
Richard Sinkler
From: aka: Rusty Strings -- Missoula, Montana
|
Posted 4 Jul 2018 8:08 am
|
|
I have switched the one's I colored back to white one's on my Carter. I never colored them on the Mullen.
I have no problem knowing which one is a split. Both Carter and Mullen use the raise hole closest to the axle. Compensators may be a good candidate for coloring.
Although the coloring for each pedal helped me on the Carter. I had 5p/6k on my E9. My SD12 Mullen is 3p/4k, so it's easy to tell what nut needs to be tuned. _________________ Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 54 years and still counting. |
|
|
|
Pete Burak
From: Portland, OR USA
|
Posted 4 Jul 2018 1:26 pm
|
|
I have seen the colored-in-with-marker ones, and I know it is a personal matter of taste, but I prefer a uniform color for the tuners (all the same color) against the mostly shiny silver endplate material.
It maybe takes a sec but you will memorize where every tuner for every pedal/lever/compensator is. |
|
|
|
Dave Stroud
From: Texas
|
Posted 8 Jul 2018 4:21 pm
|
|
Well I got some dyes in the mail yesterday. These are high-quality dyes specifically for synthetic fibers like nylon. They are more permanent than normal acid dyes, and have excellent wet and light fastness. Might seem like overkill for the nylon tuners, but I want them to come out as nice-looking as possible.
I'll start dyeing some later this week when my hex rods come in.
The colors I got are:
Royal Blue
Deep Red
Deep Violet
Jet Black
Spruce
Mustard Yellow
Turquoise
|
|
|
|
Charlie Hansen
From: Halifax, NS Canada and Various Southern Towns.
|
Posted 8 Jul 2018 6:05 pm
|
|
I use fingernail polish. When the wife isn't looking. _________________ I don't know much but what I know I know very well.
Carter S-10 3X5, Peavey Nashville 112, plus Regal dobro and too many other instruments to mention.
Bluegrass Island CFCY FM 95.1 Charlottetown, PE, Canada, on the web at cfcy.fm.
A Touch Of Texas CIOE FM 97.5 Sackville, NS, Canada,
on the web at cioe975.ca. |
|
|
|