The Steel Guitar Forum Store 

Post new topic fender 800 info?
Reply to topic
Author Topic:  fender 800 info?
Jack Goodson

 

From:
new brockton,alabama (deceased)
Post  Posted 20 Apr 2018 6:22 pm    
Reply with quote

doe,s anyone have a manual or info on how to adjust tensions and tuning on a fender 800?....thanks jack
View user's profile Send private message

Dave Zirbel


From:
Sebastopol, CA USA
Post  Posted 20 Apr 2018 6:58 pm    
Reply with quote

This link should take you to a copy of the original manual.

https://lookaside.fbsbx.com/file/fender-800%20manual.pdf?token=AWyf5k3ZEaCYXuOnA2vK8wDrNqXB8Aa3HDtBwz7VA3a69bJ8MX419F6NQW1DQSUjF0RbApeGMGQnCEuFFGA9RQcRC1TBWNLWfg0XAZstTuY--IXyA1plNFzci7EoRm3yhsqkiVNwWgB0JMPchKs8xnvA
_________________
Dave Zirbel-
Sierra S-10 (Built by Ross Shafer),ZB, Fender 400 guitars, various tube and SS amps
View user's profile Send private message Send e-mail

Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 20 Apr 2018 7:52 pm    
Reply with quote

There are no tension adjustments, outside of the turnbuckles that adjust the (slightly critical) cable tension. (Though some players stretch or swap the lowering springs to change the feel of the pedals that lower strings.). Also, there are no timing adjustments, other than the one extra hole on each pedal bell crank. It "is what it is", In a manner of speaking. Fun to play, but really limited compared to modern steels.
View user's profile Send private message Send e-mail

Jim Palenscar

 

From:
Oceanside, Calif, USA
Post  Posted 21 Apr 2018 5:52 am    
Reply with quote

Changing the lower return springs really helps on the pedal that lowers the E's.
View user's profile Send private message Send e-mail Visit poster's website

Jack Goodson

 

From:
new brockton,alabama (deceased)
Post  Posted 21 Apr 2018 6:16 am     800 ?
Reply with quote

dave, i cannot get the sie to open, probably my lack of knowledge. jim, how do you replace the springs you are refering to, and what spring would you replace them with?....thanks jack
View user's profile Send private message

Dave Zirbel


From:
Sebastopol, CA USA
Post  Posted 21 Apr 2018 6:30 am    
Reply with quote

Might be difficult to read. You couldn't open the link probably because it was a link from a Facebook page







_________________
Dave Zirbel-
Sierra S-10 (Built by Ross Shafer),ZB, Fender 400 guitars, various tube and SS amps
View user's profile Send private message Send e-mail

Jim Palenscar

 

From:
Oceanside, Calif, USA
Post  Posted 21 Apr 2018 6:31 am    
Reply with quote

Hi Jack. Take an original one to a hardware store- and get one (or a couple of them) with less tension that is longer than you need and simply cut it a titch shorter than the original. IMHO the original springs had more tension than was needed and made the guitar harder to play. Be sure to check that not only do the new ones pull the lower back but also keep it back while raising- especially the 4th string for the E-F# raise if you have that on there.
View user's profile Send private message Send e-mail Visit poster's website


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP