Author |
Topic: Session 500 Chassi |
Gary Arnold
From: Panhandle of Florida, USA
|
Posted 9 Mar 2018 10:58 pm
|
|
Can you run two(2) 15"-4ohm speakers out of a Session 500 chassi ? |
|
|
|
Steven Paris
From: Los Angeles
|
Posted 10 Mar 2018 1:18 pm
|
|
Only if you wire them in SERIES. _________________ Emmons & Peavey |
|
|
|
Jack Goodson
From: new brockton,alabama (deceased)
|
Posted 10 Mar 2018 1:38 pm Speaker?
|
|
I believe if you plug the second 4/ohmspeaker in the speaker out on back of chassis it converts the ohms load to a 2/ohm, which boost the out put of the amp from 250 watt with the internal speaker to 300 watts with both speakers. The amp is designed to do this from the factory....thanks jack |
|
|
|
Gary Arnold
From: Panhandle of Florida, USA
|
Posted 12 Mar 2018 10:54 pm
|
|
Thanks Jack for the info: Will I be able to use 2-4ohm speakers or will one have to be 2-ohms ? Thanks, Gary
One more thing, do you how to contact Jerry Miller, he is in Alabama also I think. He had a couple of Session 500 a few months ago, all I want is a Chassi in real good condition. Thanks again, Gary |
|
|
|
Mike Brown
From: Meridian, Mississippi USA
|
Posted 13 Mar 2018 5:16 am Session 500
|
|
The Session 500 can handle a 2 ohm speaker load, so when connecting a second 4 ohm BW speaker to the second jack, creates a two ohm load on the amp for it to produce its full output power. |
|
|
|
Gary Arnold
From: Panhandle of Florida, USA
|
Posted 13 Mar 2018 1:07 pm
|
|
Jack I think his name may be Jimmy Miller not Jerry Miller. Thanks |
|
|
|