| Author |
Topic: GFI Legs |
Neal Vosberg
From:
Tennessee, USA
|
Posted 1 Mar 2018 12:56 pm |
|
| What's the design on GFI legs? I've seen Ultras and Expos with what looks like the unadjustable microphone stand legs, and some with adjustable. |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 1 Mar 2018 2:38 pm
|
|
| I think the nonadjustable legs are on the entry level models. |
|
|
|
Karol Wainscott
From:
Kokomo , Indiana
|
Posted 1 Mar 2018 4:17 pm
|
|
| Erv , you are right . My Ultra has adjustable legs on it . |
|
|
|
Carl Heatley
From:
Morehead City,NC
|
Posted 1 Mar 2018 4:17 pm
|
|
The rear legs can adjust out to 7/8" or so.
Thread size is 5/8-11 so if you needed to lift the back up anymore you could just get some threaded bar and cut to length. |
|
|
|
Brint Hannay
From:
Maryland, USA
|
Posted 1 Mar 2018 4:51 pm
|
|
| My older Ultra has non-adjustable front legs, and adjustable ones on the rear. |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 2 Mar 2018 9:27 pm GFI legs
|
|
I have a GFI S12 U Ultra. The legs are light.
They are made of thick walled aluminum tubing.
The top all legs are threaded with a steel insert that screws into the body of the steel. On the bottom of the front legs have an aluminum insert that the pedal bar fits and clamps on.
The rear legs are also threated at the bottom and have adjustable inserts that allows one to adjust the back legs on an uneven floor.
I like these legs, They are much lighter than the adjustable legs, Which are made of steel. BJ |
|
|
|
