| Author |
Topic: trying different techniques to play fast |
Myk Freedman
From:
Brooklyn
|
|
|
|
Stefan Robertson
From:
Hertfordshire, UK
|
Posted 29 Nov 2017 12:04 am |
|
Sweep picking is A great technique to have in your arsenal.
But speed is simply down to ~Hand, Eye, Fingerpick co-ordination.
Possibly get rid of the distortion.
Use fingerpicks
~Metronome and start slow and increase the speed.
Hammer -Ons are another way to approach speed picking.
So 4 key elements that offer variety to your performance and can be done at speed.
Fingerpicking with whatever type of blocking you know
Hammer-ons
Sweep Picking
Rolls
I left Harmonics out as I think its not usually a speed sound you go for but can be.
_________________
Stefan
Bill Hatcher custom 12 string Lap Steel Guitar
E13#9/F secrets: https://thelapsteelguitarist.wordpress.com
"Give it up for The Lap Steel Guitarist" |
|
|
|
Doug Beaumier
From:
Northampton, MA
|
|
|
|
Michael James
From:
La Crosse, Wisconsin, USA
|
Posted 29 Nov 2017 7:33 am
|
|
One way to get speed is to utilize open strings with hammer ons and pull offs. Study the technique dobro players use.
Granted it's not going work in every situation but you will be surprised how much you can do.
Another tip is don't drive on icy roads. It could be dangerous.  |
|
|
|
Andy Volk
From:
Boston, MA
|
Posted 29 Nov 2017 8:54 am
|
|
Speed on a string instrument is a combination of knowing where you're going, having the technique and muscle memory to execute what your brain is telling you to do, and that elusive X-factor of each individual's central nervous system wiring. For some of us, that speed brake is hard-wired so the speed limit is damn hard to surpass.
On a non-pedal steel, it gets even harder than a plucked string instrument because notes on the same string need to be articulated at high speeds or they just become a blur. Hammers and pulls work well but they are pretty dependent on certain keys, tunings and chord progression. e.g. can you play fast whole tone scales with hammers and pulls? Maybe...
The sweep picking you're using is one way to articulate fast arpeggios but it can grow old pretty quickly if you can't change the underlying scales or harmonies easily.
Debashish Bhattacharya has probably the fastest right in the business. He seems to use a lot of wrist with a kind of bounce off the string in the thumb. His fingers seem to be straighter that the curled position many modern pedal players use. Not quite sure how knowing this helps anyone.
https://www.youtube.com/watch?v=cuZHRJhoEIw
On the jazz forum, there are pages and pages on George Benson's unique way of holding the pick and how that leads to facilitating speed. Is there a steel guitar equivalent to Benson picking? Beats me!
This Tom Morrell cut has some pretty fast non-pedal playing in a swing context:
https://www.youtube.com/watch?v=GXkuSORjoqY
Joaquin was no slouch in the speed department. He had his set licks that facilitated speed in certain ways - such as the 7th chord position one whole step below the tonic chord. People who saw him in person have described his hand as "floating over the strings". He probably used pick and plan blocking in conjunction with left hand bar blocking - something the Hawaiian greats excelled at doing.
Here's Doug Beaumier's interesting speed picking exercise: http://playsteelguitar.com/wp-content/uploads/C6LapSteelSpeedpicking.pdf
anyway, good luck in your explorations, Myk!
_________________
Steel Guitar Books! Website: www.volkmediabooks.com |
|
|
|
Myk Freedman
From:
Brooklyn
|
Posted 29 Nov 2017 9:36 am
|
|
Hey everyone, thanks for checking out the video and for sharing your thoughts. Lot's to think about.
As the arpeggios are starting to feel more natural I'm beginning to work on a system to play scales in this manner. Oddly, as Andy was writing about playing the wholetone scale I was practicing that very sequence! The scales are a lot trickier to sweep pick, but not impossible. Opens a lot of doors to be able to play different modes.
I tend to not focus much on utilizing open strings for speed lines because it's too key dependent and I play a lot of chromatic music. That's why I'm interested in developing an approach I can use over any progression/key.
I have to chuckle a little when people say they'd like the distortion removed so they can hear what's going on. The distortion is as part of what's happening as anything else. 
_________________
http://mykfreedman.com |
|
|
|
Mike Neer
From:
NJ
|
Posted 29 Nov 2017 9:49 am
|
|
Myk, I dig the noise element especially.
For an experienced player of music, like Myk is, sometimes there is no traditional way for you to play what you're hearing except to physically invent it yourself.
_________________
http://www.steelinstruction.com/
http://mikeneer.com |
|
|
|
Andy Volk
From:
Boston, MA
|
Posted 29 Nov 2017 10:57 am
|
|
Whole tone arpeggios are such a cool sound!
Have you tried a flat pick? If you're after single note runs, sometimes you can pull off stuff with a flatpack that would not be possible playing fingerstyle. In C6th tuning, diminished arpeggios should be very playable via sweeping because of the way they lay out on there fretboard. I'll enjoy hearing what you come up with, Myk.
_________________
Steel Guitar Books! Website: www.volkmediabooks.com |
|
|
|
Guy Cundell
From:
More idle ramblings from South Australia
|
Posted 29 Nov 2017 1:44 pm
|
|
Very cool.
I thought you might like this. Mr Dunn in Jan 1935, one of the first recordings of electric steel. In AABA form, check the beginning of the B section.
http://picosong.com/wFf2x |
|
|
|
Norman Evans
From:
Tennessee
|
Posted 29 Nov 2017 2:54 pm
|
|
Here's a fairly fast one by a friend of mine at a jam session several years ago. Listen to the hammer-ons on the ending.
http://picosong.com/wFf6x/ |
|
|
|
Stefan Robertson
From:
Hertfordshire, UK
|
Posted 29 Nov 2017 3:23 pm
|
|
| Andy Volk wrote: |
Whole tone arpeggios are such a cool sound!
Have you tried a flat pick? If you're after single note runs, sometimes you can pull off stuff with a flatpack that would not be possible playing fingerstyle. In C6th tuning, diminished arpeggios should be very playable via sweeping because of the way they lay out on there fretboard. I'll enjoy hearing what you come up with, Myk.
|
Andy you referring to the whole tone scale or the arpeggios made from a chord
_________________
Stefan
Bill Hatcher custom 12 string Lap Steel Guitar
E13#9/F secrets: https://thelapsteelguitarist.wordpress.com
"Give it up for The Lap Steel Guitarist" |
|
|
|
Bill McCloskey
From:
Nanuet, NY
|
|
|
|
Andy Volk
From:
Boston, MA
|
Posted 29 Nov 2017 5:49 pm
|
|
Whole tone scale, Stefan. The dim idea was a separate point. I was multitasking badly today.
When I think of speed on a plucked string instrument, this is what comes to mind: https://www.youtube.com/watch?v=gxJIGixKmxw
Doug Jernigan matches this speed on pedal steel playing hoedown but Tal is playing at sax speeds thru changes. None of which is all that helpful on a lap steel.
_________________
Steel Guitar Books! Website: www.volkmediabooks.com |
|
|
|
Doug Beaumier
From:
Northampton, MA
|
|
|
|
Aaron Jennings
From:
Montana, USA
|
Posted 29 Nov 2017 7:35 pm
|
|
I thought this conversation about Buddy Emmons technique was actually really helpful in terms of thinking about hand technique versus speed:
http://bb.steelguitarforum.com/viewtopic.php?t=323447
It seems a lot of those really fast guys (Emmons, Jernigan) rely on fingerpicks and blocking techniques to get those banjo rolls and high speed licks.
I might get shot for this, but I've always loved Bob Brozman when he is on a roll...https://www.youtube.com/watch?v=i551eU_fYkE
I love the direction you are going, and the most recent album. The distortion is sweet, and wonderful. |
|
|
|
HowardR
From:
N.Y.C.-Fire Island-Asheville
|
|
|
|
Stefan Robertson
From:
Hertfordshire, UK
|
Posted 30 Nov 2017 3:10 am
|
|
| Andy Volk wrote: |
Whole tone scale, Stefan. The dim idea was a separate point. I was multitasking badly today.
When I think of speed on a plucked string instrument, this is what comes to mind: https://www.youtube.com/watch?v=gxJIGixKmxw
Doug Jernigan matches this speed on pedal steel playing hoedown but Tal is playing at sax speeds thru changes. None of which is all that helpful on a lap steel. |
Takes amazing right hand control but it can be done. Lots of rapid Chromatics and double picking notes and arpeggios.
Like Andreas Oberg said - start slow and build up from there. Its a matter of patience and persistence
_________________
Stefan
Bill Hatcher custom 12 string Lap Steel Guitar
E13#9/F secrets: https://thelapsteelguitarist.wordpress.com
"Give it up for The Lap Steel Guitarist" |
|
|
|
Bill McCloskey
From:
Nanuet, NY
|
Posted 30 Nov 2017 7:02 am
|
|
| Howard, thanks for posting the Rich Arnold stuff. He was amazing when he was playing dobro. unfortunately he gave up the dobro years ago. He has recently begun playing again on lap steel and tricone. He also has a new channel: https://www.youtube.com/channel/UCNKJM_EKfhZ84oIe9AB-bDg |
|
|
|
Bill McCloskey
From:
Nanuet, NY
|
Posted 30 Nov 2017 9:43 am
|
|
| BTW, Rich Arnold (Jazz McDobro) plays with 3 finger picks and a thumb pick to get that speed |
|
|
|
Myk Freedman
From:
Brooklyn
|
Posted 30 Nov 2017 4:25 pm
|
|
Thanks for the kind words, Mike, Guy and Aaron. And for all the links, everyone. I'm gonna have to work on my version of Donna Lee!
_________________
http://mykfreedman.com |
|
|
|
Mike Bagwell
From:
Greenville, SC, USA
|
|
|
|
Stefan Robertson
From:
Hertfordshire, UK
|
Posted 1 Dec 2017 6:24 am
|
|
His pedal steel work sounds cleaner than his non-pedal recordings. Where he does an abundance of rolls.
I wonder what tuning he uses? Anyone know?
_________________
Stefan
Bill Hatcher custom 12 string Lap Steel Guitar
E13#9/F secrets: https://thelapsteelguitarist.wordpress.com
"Give it up for The Lap Steel Guitarist" |
|
|
|
Mike Bagwell
From:
Greenville, SC, USA
|
Posted 2 Dec 2017 4:42 am
|
|
| C6 on the rear neck |
|
|
|
