INSTRUCTION STRINGS ACCESSORIES MUSIC LINKS
 Visit Our Catalog at SteelGuitarShopper.com for Steel Guitars, Strings, Instruction, Music and Accessories 
Forum Index
where steel players meet online
The Steel Guitar Forum

Back from SWSGA - The SGF Store is Now Open
for Business at SteelGuitarShopper.com



Post new topic studio
Reply to topic
Author Topic:  studio
Reggie Duncan


From:
Mississippi
Post Posted 23 Nov 2017 9:06 pm     Reply with quote

I have a 12 x 20 room to treat acoustically. Planning on getting 12" x 12" panels and bass traps.
I have a recording desk with speakers with my chair about 7' off the 12' wall...two speakers...standard listening/mixing setup. Has anyone experimented with leaving a space between the panels when mounting or is it best to butt them up together? I was thinking of placing 4 of the panels together in 3 locations on the wall behind the speakers. Advice welcomed!
TBANKS!
_________________
reggie.duncan.9275@facebook.com
View user's profile Send private message Send e-mail
Rick Schacter


From:
Portland, Or.
Post Posted 24 Nov 2017 6:18 am     Reply with quote

Don’t make the acoustics in your room too dead.
Bass traps should used.

In my studio, I have some Auralex panels behind my reference monitors as well as on each sidewall, placed just about the same height where my ears are when I’m sitting in front of my monitors.

The rest of my room is “live”.

An acoustic panel above your head might be good to have as well.

Auralex has kits that are designed for different size rooms.
You could check them out.

https://www.sweetwater.com/store/search.php?s=Auralex+roominators

Rick
View user's profile Send private message Send e-mail
ajm


From:
Los Angeles
Post Posted 24 Nov 2017 8:38 am     Reply with quote

This guy has many IMO really good videos/lessons on Youtube.

No need to thank me for further complicating things.

https://www.youtube.com/watch?v=6Z7lopu2pFk
View user's profile Send private message
Godfrey Arthur


From:
Philippines
Post Posted 10 Dec 2017 8:27 am     Reply with quote

You don't want it too dead.

But whatever you do make sure your mix position is the same on the left as it is on the right with you sitting in the center of that mix position in the center of the end of the room you place your mixer and speakers for a good phantom image out of your monitors.






As far as butting the foam panels together or not, you would need to know how your room responds to your mix position before you do this.

Foam addresses high frequencies so you might want to experiment with them before you commit to a whole bunch of them all over the walls. And they don't all do what they are claimed to do.

Using cloth with dead air space behind like a gobo might get better results.




This above is elaborate but burlap or breathable cloth stretched over a thin wood frame with some sound absorbing material, fiberglas or sound proofing tiles behind the stretch of cloth where the cloth does not actually touch the sound absorbing material but hung with a little space between, might work better than foam panels to trap certain high frequencies inside of the dead air space behind the cloth rather than be reflective off a foam wedge panel.

And it may take some time to pass to figure this out after doing mixes for a while with your designated monitors. You will want to get used to hearing many mixes, pro released ones to get to know your monitors and your room to know where additional high frequency treatment is needed ..or not.

The foam treatment has much to do with where your ears are. You would more likely be hearing sound reflecting off the sides of the mix position than you would hearing sound reflecting from behind the monitors.
_________________
From the Bronx via Manila
ShoBud The Pro 1
YES it's my REAL NAME!
View user's profile Send private message
Daryl Thisdelle


From:
New Brunswick, Canada
Post Posted 13 Dec 2017 6:15 pm     Room treatment Reply with quote

Prime Acoustic sells room treatment kits that work top notch. You should have where you listen to your recordings and do mixes fairly quiet. There should be no bouncing of sound in that area. There is first order 2nd order and so on of sound bouncing around the room. The opposite end of your studio should be more open. If you can not hear properly then you will never know what is wrong. Do not skimp on room treatment. Plus it is a must to put treatment over your listening area. My recording studio has room treatment in it and I spared no money on this part of it..If you treat your room properly everything will work much better and easier in your studio. If you skimp on this part of it your room will not be able to tell you much of what is right and what is wrong in your mix. I can send you pics of what I did to my studio so you can see what can and has to be done. Remember there is a right way and a wrong way.. make sure you listen and do your room the right way.. If you want help email me or send me a message..
Daryl
_________________
Williams 700 Keyless SD 12 String Universal Lacguer Body Wood Neck Alumitone Pick Up GD Walker Stereo Steel Amp Preamp Combo With 2x15 inch JBL Speakers In Tuned Cabinets, Hilton Digital Sustain Pedal, Telonics Volume Pedal. Steel Seat With Back Rest And Swivel And Adjustable Legs. George L Cables. BJS Bar. Nookies Thumb Pick National Finger Picks. Jagwires Petterson Strobo Plus HD Tuner
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Steel Guitar Music
Instrumental steel guitar CDs for your permanent collection
www.SteelGuitarMusic.com

BIAB Styles
Ray Price Shuffles
for Band-in-a-Box

by Jim Baron

Please review our Forum Rules and Policies

The Steel Guitar Forum
148 South Cloverdale Blvd.
Cloverdale, CA 95425 USA

Support This Forum

advertisement