| Author |
Topic: Hilton pedal problem need help |
Wayne Quinn
From:
Cape Breton.NovaScotia
|
Posted 30 May 2017 1:58 pm |
|
I have a Hilton pedal 4 yrs old. it just all of a sudden goes dead on me. seems if i take it and fool with it, like pull out the cable going to the amp, or if i move it around upside down , ext, it seem to work again for a while. when playing i can here my tone change all of a sudden. then its like it fades to no volume then if i fool with it again it comes back for a while any one have any suggestions
_________________
D10 Carter, SD10 Mullen .Nashville 400,. peavey 112 Boss DD3., RV5, |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 30 May 2017 3:27 pm
|
|
That sounds like bad cables.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Wayne Quinn
From:
Cape Breton.NovaScotia
|
Posted 30 May 2017 4:11 pm
|
|
i changed the cables a few times Lane still the same results. that was my first thought to.
_________________
D10 Carter, SD10 Mullen .Nashville 400,. peavey 112 Boss DD3., RV5, |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 30 May 2017 4:35 pm
|
|
Check for loose jacks, loose/broken solder joints in the jacks, check for connections at the power inlet.
Keith's email is all over the forum, email him.
It's likely to be something simple.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 31 May 2017 2:19 am
|
|
Could be the power supply connection (jack). I was having problems with mine and I could wiggle the power connection and it would come and go. I replaced the power jack on the pedal and no more problems.
Could also be the plug on the power supply cable.
_________________
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit |
|
|
|
Wayne Quinn
From:
Cape Breton.NovaScotia
|
Posted 31 May 2017 5:15 am thanks
|
|
Jack thanks for that information. i will check that out .if the supply cord was acting up would it still supply some juice to the pedal. because the light on my pedal does not go out.
_________________
D10 Carter, SD10 Mullen .Nashville 400,. peavey 112 Boss DD3., RV5, |
|
|
|
Jim Cohen
From:
Philadelphia, PA
|
|
|
|
Wayne Quinn
From:
Cape Breton.NovaScotia
|
Posted 31 May 2017 11:50 am Hilton pedal problem?
|
|
Hey guy,s i was talking to Mr Hilton to day by way of Jim Cohan and Keith is working with me on resolving the problem. and thanks to Lane and Jack that chimed in with your suggestions
_________________
D10 Carter, SD10 Mullen .Nashville 400,. peavey 112 Boss DD3., RV5, |
|
|
|
