| Author |
Topic: 4th string conflict |
Tommy Thompson
From:
tampa, fl
|
Posted 8 Oct 2015 8:14 pm |
|
| Seems on my sho-bud professional I have an issue tuning string 4. If I tune the key, then the lower lever and the raise lever, then the pedal 3, when I go back to the raise lever and apply it,then it goes too sharp. Can I correct this with the stop? What am I doing wrong? I never had this problem before. |
|
|
|
Jeff Mead
From:
London, England
|
Posted 9 Oct 2015 12:11 am
|
|
I had a similar problem on my 6139 where if I raised my Es, I'd have to give it a little nudge with the E lower to get it back in tune.
I fixed it by putting some lubrication in the changer.
It's an easy fix and can't do any harm and might be worth a try in case it's sticking on something. |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 9 Oct 2015 1:02 am
|
|
I'd check that the rack of the lever returns far enough that the little bit of wire on the barrel doesn't still contact the rack.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Dan Beller-McKenna
From:
Durham, New Hampshire, USA
|
Posted 9 Oct 2015 1:52 am
|
|
| What Lane said. |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 9 Oct 2015 3:53 am
|
|
I've noticed that, over the years, many racks have lost their little springs to retract the racks. I bet there was a reason for those springs...
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
