| Author |
Topic: Sho~Bud Knee Lever Kits |
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 7 Dec 2014 8:15 am |
|
I'm in the process of restoring a 70's Sho~Bud #6139 S-10 with a rack and barrel under carriage (see photos below)
As you can see, It only has the original single RKL. My customer desires to have four total levers, so I'm looking for parts to make kits from.
I bought one "right" lever ass'y shown below from someone on eBay.
Below is what I now need:
(1) Rack ass'y for the "right" lever ass'y I now have that matches the existing racks.
(1) Complete kit for a "right" lever that matches the existing parts.
(1) Complete kit for a "left" lever that matches the existing parts.
Please email me with what you have and how much you want for your parts.
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Craig A Davidson
From:
Wisconsin Rapids, Wisconsin USA
|
Posted 7 Dec 2014 8:48 am
|
|
| Check with James Morehouse. He has been under the weather a bit but might be able to help you out. |
|
|
|
Paul Norman
From:
Washington, North Carolina, USA
|
Posted 7 Dec 2014 5:05 pm
|
|
| James Morehead. |
|
|
|
Michael Yahl
From:
Troy, Texas!
|
Posted 8 Dec 2014 6:41 pm
|
|
I can cover ya Lynn. Gimme a call.
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/ |
|
|
|
James Morehead
From:
Prague, Oklahoma, USA - R.I.P.
|
Posted 9 Dec 2014 6:50 am
|
|
Lynn, Are you not getting my emails? I've been waiting for you to get back with me about your request. 
_________________
"Good judgement comes from experience, and a lot of that comes from bad judgement"~old cowboy proverb.
shobud@windstream.net |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 9 Dec 2014 9:40 am
|
|
Hi James,
Thanks for posting. Hopefully, that means you're feeling better 
Yes, I did receive your two emails on Sunday but had a steel jam to attend that day and wasn't able to reply that evening. I'm sorry, but I've just have had a lot on my plate lately. I have needed to pack up a guitar to ship the Netherlands this afternoon, pick up another one from Los Angeles and then run a few errands, so I have a fairly busy schedule today also.
Someone has sent me a rack ass'y which should arrive any day now. As soon as I have it, I'll be able to determine where I can use it on this guitar. I'll then be able to compile a detailed list of parts to order.
Hopefully, between you and Michael I'll be able to get everything I need for this project!
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
James Morehead
From:
Prague, Oklahoma, USA - R.I.P.
|
Posted 9 Dec 2014 10:50 am
|
|
Cool enough, my Friend. I just wanted to make sure you were recieving my emails and not waiting on me to respond. And yes, each day, I gain back a little health!!
_________________
"Good judgement comes from experience, and a lot of that comes from bad judgement"~old cowboy proverb.
shobud@windstream.net |
|
|
|
Brian LeBlanc
From:
Falls Church, Virginia, USA
|
Posted 14 Apr 2024 7:30 am 6139....kneezz
|
|
know this is old...
i've got 2 39's
both need E raise lever kits
?
_________________
'Frenchy' LeBlanc...
ShoBud & Twins |
|
|
|
Dave Grafe
From:
Hudson River Valley NY
|
Posted 14 Apr 2024 9:35 am Re: 6139....kneezz
|
|
| Brian LeBlanc wrote: |
know this is old...
i've got 2 39's
both need E raise lever kits
? |
If you have needs it would probably be best to post your own thread Brian, rather than piggy-backing on this decade old post. Lynn is no longer working on instruments or able to answer messages and at this point it would be best to avoid any and all misunderstandings in that regard.
Best of luck in your quest. |
|
|
|
