| Author |
Topic: Lube bottle/applicator |
Nathan Delacretaz
From:
Austin, Texas, USA
|
Posted 10 Feb 2003 8:55 am |
|
| Where does a guy find a bottle/oil can with a super fine needle-type nose for lubing your steel? Sewing supply shop? |
|
|
|
Mark Herrick
From:
Bakersfield, CA
|
Posted 10 Feb 2003 9:01 am
|
|
| The bottles of "Tri-Flow" that you can get at a bicycle shop come with a plastic tube; "Super Lube" (a similar teflon/oil product) that you can probably get at a fishing tackle shop has a small metal tube; you could try a hobby shop where you'll probably find a small plastic bottle with a top incorporating a plastic or metal tube. |
|
|
|
John Hawkins
From:
Onalaska, Tx. on Lake Livingston * R.I.P.
|
Posted 10 Feb 2003 9:21 am
|
|
Nathan,
Go to the Carter Guitar site here on the forum or call Ann Fabian at the Carter number .
They sell a small bottle with a tube that extends and / or retracks and will reach any part of you steel you want . They are just perfect for lubrication any and all parts .
John |
|
|
|
Nathan Delacretaz
From:
Austin, Texas, USA
|
Posted 10 Feb 2003 9:24 am
|
|
| Thanks very much for the tips, guys. |
|
|
|
Rex Thomas
From:
Thompson's Station, TN
|
Posted 10 Feb 2003 10:06 am
|
|
| I got my "NEEDLEPOINT BOTTLE" from Hobby Town USA. You can get different size needles for more or less flow, but the first one I grabbed off the shelf works GREAT. There are 2 Hobby Town USA's in Austin. |
|
|
|
Herb Steiner
From:
Spicewood TX 78669
|
Posted 10 Feb 2003 10:36 am
|
|
I use an gun oil product called "Break Free" which has a needle tube applicator. It's a flow bottle type thing, non-aerosol, which I prefer for neatness. Break Free should be available at most sporting goods stores that handle firearms.
------------------
Herb's Steel Guitar Pages
Texas Steel Guitar Association
|
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 10 Feb 2003 12:46 pm
|
|
Radio Shack has a good applicator. It has a long nose and squeeze type container. Also Singer sewing machine has an oiler for sale like you are looking for. I bought one a Wally World.
Erv |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 10 Feb 2003 6:41 pm
|
|
| I use 2.5 cc syringes (hypodermic needles). They do allow the most accurate application, but they do look...ahem, intimidating (or maybe "incriminating" is a better word). Industrial supply houses normally carry them, as they are used for dispensing fluxes, lubricants, and adhesives in many factories. The ones they sell have the points ground off so they can't comfortably be used for illicit purposes. |
|
|
|
Nathan Delacretaz
From:
Austin, Texas, USA
|
Posted 11 Feb 2003 6:04 am
|
|
| Thanks again, fellas - I can't wait to see the look on my wife's face when I come home with gun supplies and/or syringes! |
|
|
|
Rex Thomas
From:
Thompson's Station, TN
|
Posted 11 Feb 2003 1:36 pm
|
|
 |
|
|
|
Ann Fabian
From:
Mesquite, Texas, USA
|
|
|
|
Emmett Roch
From:
Texas Hill Country
|
Posted 14 Feb 2003 4:55 pm
|
|
I use the yellow plastic oiler that fits in the buttstock cavity of an M-14 rifle. When you unscrew the cap, it has a small metal rod attached that you can drip the oil down to where you need it. For some of the harder-to-reach areas on my guitar (like where several pull rods are bunched together), I have a .10" drill bit about 4" long that I dip into the oil and let it drip slowly through the grooves in the tip of the bit.
For years I used Rem-Oil, a light oil designed for firearms; here in Spain it's hard to find readily-available gun-related products, but sewing machine oil can be had. You might have to oil your changer more often with the lightweight stuff, but it's less likely to collect lint and dust.
Just my $.02 worth...
------------------
___________________
GFI S-12 extended E9
[This message was edited by Emmett Roch on 14 February 2003 at 04:56 PM.] |
|
|
|
Bob Cox
From:
Buckeye State
|
Posted 14 Feb 2003 5:45 pm
|
|
| Walmart fishing department has an oiler with a needle point for fishing reels whoops, that fishin reels! |
|
|
|
Sonny Jenkins
From:
Texas Masonic Retirement Center,,,Arlington Tx
|
Posted 15 Feb 2003 9:33 am
|
|
| I noticed in Home Depot the other day a small plastic bottle of graphite with a hypodermic needle type applicator. Is graphite a suitable lubricant for PSG? |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 15 Feb 2003 8:19 pm
|
|
| Go to a plastic supply store. They have a small plastic bottle with a long needle nose for applying solvent to cement plexiglas together. |
|
|
|
