| Author |
Topic: Goodrich L120 transformation |
John Sluszny
From:
Brussels, Belgium
|
Posted 15 Nov 2002 8:02 am |
|
I have a Goodrich "Low Profile" L 120 volume pedal.
Is there a way I could transform it into a "regular" 120? {i.e. by putting something under it (toe & heel)}
Could someone give the measurments of a 120 fully depressed and raised,heel and toe?
Thanks.JS |
|
|
|
Gino Iorfida
From:
Pittsburgh, Pennsylvania, USA
|
Posted 15 Nov 2002 5:03 pm
|
|
The easiest way to transform a L120 into a standard 120 would be to find someone willing to make a trade with you  |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 15 Nov 2002 5:44 pm
|
|
| Well, here's an idea...simply cut a piece of wood about 3/4" thick the same size as the bottom of the pedal. Sand it smooth and spray it with matching paint, and then remove the rubber feet from the pedal> Glue the wood to the bottom of the pedal, and then re-attach the rubber feet to the wood with small wood screws. |
|
|
|
anewcomb
From:
Astoria NY
|
Posted 19 Nov 2002 2:04 pm
|
|
I jacked up the heel of mine with a rectangle of plywood, but didn't glue it on there. Instead I screwed it on with longer screws I bought, ones that fit the tapped holes the screws for the rubber feet went into. This works fine and the pedal can still be sold later as a proper L-120.
------------------
Andy Newcomb a beginner on the steel guitar
Williams Keyless S-10, Rickenbacher Model 59
|
|
|
|
