| Author |
Topic: ZB parts |
Charlie Moore
From:
Deville, Louisiana, USA
|
Posted 10 May 2014 6:27 am |
|
Anybody have any old changer parts for D 10 ser#0107 what ever year it is,I need the little fiber pieces that go under the horse shoe part of changer,hope I made sense of what I need..thanks for any help...CM
_________________
Use it up,wear it out,make it do,or do without..... |
|
|
|
John Gilman
From:
Jericho, VT USA
|
Posted 10 May 2014 11:50 am
|
|
Hey Charlie
I know what you're talking about. I don't have any spares, but I measured one from 0078 at .053" thick. So somewhere around 50 thousandths will probably work.
Hope this helps.
_________________
74 Sho-Bud ProII
73 Sho-Bud/Surratt/Marrs D-10
72 Emmons PP D-10
69 ZB Custom D-10 |
|
|
|
Charlie Moore
From:
Deville, Louisiana, USA
|
Posted 10 May 2014 1:53 pm Parts
|
|
Thanks John,I wonder if metal would work better than fiber...CM
_________________
Use it up,wear it out,make it do,or do without..... |
|
|
|
John Gilman
From:
Jericho, VT USA
|
Posted 11 May 2014 11:30 am
|
|
Don't know the answer on that one, Charlie. I would assume that different materials would alter the tone on the plain strings. FWIW, it looks like circuit board phenolic is close to the right thickness at 1/16 and could be sanded down to .050 fairly easily. It is my assumption that those shims are in there to bring the plain strings up to approximately the same height as the wound strings but I leave it to the ZB experts to correct me on that.
_________________
74 Sho-Bud ProII
73 Sho-Bud/Surratt/Marrs D-10
72 Emmons PP D-10
69 ZB Custom D-10 |
|
|
|
Charlie Moore
From:
Deville, Louisiana, USA
|
Posted 11 May 2014 4:46 pm Zb
|
|
thanks for your input John...CM
_________________
Use it up,wear it out,make it do,or do without..... |
|
|
|
Charlie Moore
From:
Deville, Louisiana, USA
|
Posted 18 May 2014 9:46 am parts
|
|
TTT
_________________
Use it up,wear it out,make it do,or do without..... |
|
|
|
