| Author |
Topic: MSA WebSite"!!!!!!!!!!!!!!!!!!!! |
Ts McDonald
From:
Arlington, Texas USA
|
Posted 13 Jun 2002 1:50 pm |
|
If anyone has not visited the "New""MSA WebSite" this Afternoon, may I suggest that you really should "Take-A-View"!!!! "KowaBonga", Captain!!!!! Thanks, www.msapedalsteels.com
Ts
P.S. aka "PostScript"!!!!!
Today, Friday, 06-28-2002, I was with "My Mentor, aka "Reece" Anderson". I played and listened to Reece play the "New MSA Millennium", and I was totally in Awe of the "Tone and Sustain (Absolutely breathtaking), Smoothness of the Playing Action of the Guitar, Pedals, Knee Levers, etc. and the ability of the Guitar to be completely Stable
when playing it!!!!! As Richard from Boston so aptly stated, "You simply must hear and play this MSA Millennium to enjoy the excellent craftsmanship of this finely crafted Instrument, because the "Pictures" are great, but the Guitar, in person, is even more beautiful to See and Hear!!!!!
------------------
Ts 
[This message was edited by TS MCDONALD on 13 June 2002 at 03:23 PM.] [This message was edited by TS MCDONALD on 28 June 2002 at 11:36 AM.] |
|
|
|
Jim Smith
From:
Midlothian, TX, USA
|
Posted 13 Jun 2002 2:23 pm
|
|
http://www.msapedalsteels.com/
Very nice photos and a mostly "conventional" looking steel! From my first glance through the website, I see some neat features, modular pickups with a cover blended into the neck, different way of attaching the pedal bar, square stainless steel cross shafts, guide slots instead of holes for the pull rods, etc. 
I do see some things that I either don't care for or would take some getting used to though.  The 3D fretboards look like they would gather and hold a lot of dust. The neck switch is mounted on the rear of the back neck and has a center-off instead of a center-on switch. The pullers only have four holes. I don't see any split-tuner screws at the changer. The guitar has in-line ball joints with thumb wheels at the top of the pedal rods for height adustment - I'd be worried that they would move on their own.
Over all though, it's quite a stunning looking instrument. |
|
|
|
smike
From:
oakland, ca
|
Posted 13 Jun 2002 2:47 pm
|
|
wow... looks great. how much?
also, isn't that fingerboard going to collect dust over time? or are those sections not as recessed as they look?
bruce
aka smike |
|
|
|
Kyle Bennett
From:
Dallas, TX USA
|
Posted 13 Jun 2002 3:39 pm
|
|
Jim,
The 3-D fret pools are manufactured using an anti-static material. The frets are not that deep and we have not had any problem with dust. The bank switch can be wired either way, both on or both off (your choice). The pullers are also available with 5 slots (not photographed). The pedal adjustment knob has built in friction and will not move unless you move it! Split tuners also were not photographed.
Kyle
|
|
|
|
Jim Smith
From:
Midlothian, TX, USA
|
Posted 13 Jun 2002 3:55 pm
|
|
| Thanks for the update Kyle. That's interesting about the bank switch, I've never had any luck rewiring a center-on to be center-off or vice verse. As the split tuners are not on the photographed guitar, I assume the guitar is a prototype, which is even more impressive. |
|
|
|
Doyle Huff
From:
Broken Arrow, OK USA
|
Posted 13 Jun 2002 3:57 pm
|
|
| The 3-d fret board were more or less std on the Sho-Bud guitars. I have them on my Super-pro and have a little trouble with dust but a paint brush will clean them right up. Also the boards were not made from anti-static material. Just a personel thing, but I like the 3-d over the flat fret board. I'm not sure I like the black legs but I bet you could get std legs if you wanted them. Of course that adds to the weight. Good looking axe. |
|
|
|
Joey Ace
From:
Hamilton, Ontario, Canada
|
|
|
|
smike
From:
oakland, ca
|
Posted 13 Jun 2002 7:27 pm
|
|
i'm still not sure about the fretboard/dust issue, but...
those kind of look like the old msa nut rollers to me... if this is truly a state-of-the-art steel, how come it doesn't have ball-bearing nut rollers to eliminate any possible hysteresis? or are they there but hard to see in the pictures?
thanks,
bruce
aka smike |
|
|
|
Kyle Bennett
From:
Dallas, TX USA
|
Posted 13 Jun 2002 8:10 pm
|
|
Bruce,
The nut rollers and pull pins are made from a medical grade stainless that doesn’t require lubrication. No bearings needed on Millennium’s nut rollers.
Kyle
|
|
|
|
Doug Earnest
From:
Branson, MO USA
|
Posted 14 Jun 2002 6:47 am
|
|
Well, it looks good to me like I was sure it would. I like the pedal board clip thing.
Have I missed the sound bite ? It would be nice to hear a direct comparison of a vintage MSA and the new one in a sound clip. They are probably working on one. I would like to hear the same thing played on the two guitars, same amp settings, same player etc. Just curious.
Congratulations to MSA, I hope everything works out. Like they say, no guts no glory.
------------------
Doug Earnest
The only Zum Keyless U12, Fender Cyber Twin
|
|
|
|
CrowBear Schmitt
From:
Ariege, - PairO'knees, - France
|
Posted 14 Jun 2002 8:04 am
|
|
Congratulations MSA !
Steel glad to see ya'back...  |
|
|
|
Marco Schouten
From:
Amsterdam, The Netherlands
|
Posted 14 Jun 2002 9:15 am
|
|
A modern guitar like this begs for an advanced gearless tuner. Just my opinion.
------------------
Steelin' Greetings
Marco Schouten
Sho-Bud Pro III Custom
|
|
|
|
smike
From:
oakland, ca
|
Posted 14 Jun 2002 9:40 am
|
|
kyle -
thanks for the response.
still... how much?
it would be kind of nice to know how many guitars i would have to sell to get one!
thanks,
bruce l.
aka smike |
|
|
|
Brad Burch
|
Posted 14 Jun 2002 1:06 pm
|
|
Prices as listed. If someone gets a chance to play one, please post your comments:
Double 10 with 8 pedals and 5 knee levers $5995.00
Single 12 with 8 pedals and 5 knee levers $5495.00
Single 10 with 3 pedals and 5 knee levers, on dbl frame $4795.00
Single 10 with 3 pedals and 5 knee levers $4295.00
Each additional pedal or knee lever $200.00 |
|
|
|
Martin Abend
From:
Berlin, Germany
|
Posted 14 Jun 2002 2:41 pm
|
|
...a S-10 Anapeg would be less expensive AFAIK... But you'd have to wait longer...
Though I most problably will never be able to afford a new MSA I wish you all the best and God's rich blessings. |
|
|
|
richard burton
From:
Britain
|
Posted 14 Jun 2002 11:54 pm
|
|
| From looking at the pics, is the neck a folded piece of aluminium, similar to Carter design? It's not my favorite feature on a steel guitar. Maybe the carbon fibre body is strong enough not to need a cast neck? |
|
|
|
Kyle Bennett
From:
Dallas, TX USA
|
Posted 15 Jun 2002 3:59 am
|
|
Richard,
The necks on Millennium are not folded or cast. They are machined from aluminum billet. However, Millennium's strength is not relying on the necks. The strength and stability are in the carbon composite body.
Kyle |
|
|
|
Johan Jansen
From:
Europe
|
Posted 15 Jun 2002 8:58 am
|
|
I have seen Fender custom shop 6 strings for even more money. Quality has it's price.
I surely hope the MSA proves it's quality, in sound durability and service.
C'mon guys, give it a chance!!!!!
JJ |
|
|
|
Doug Seymour
From:
Jamestown NY USA (deceased)
|
Posted 16 Jun 2002 2:58 pm
|
|
So what's the matter with black legs?? There are lots of nice looking black legs!! You guys are all alike....the keyless don't look like a steel guitar should look.....they shouldn't have black legs & on & on! Come on!
It's how they sound & play that really makes any difference! or have I missed something in all these years?? |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 17 Jun 2002 11:56 am
|
|
| An S10 Anapeg would not be less expensive |
|
|
|
Rick Collins
From:
Claremont , CA USA
|
Posted 17 Jun 2002 12:43 pm
|
|
| Quote: |
| So what's the matter with black legs?? |
Nothing Doug, some people like caviar, some like peanut butter, some like both. Personally, between the two, I'll choose peanut butter everytime. And caviar is much more expensive and prefered by those with more discriminating taste. As you may have noticed, MSA is offering a multitude of colors, on the guitar and the legs. This is a good thing;___people's taste vary widely.
| Quote: |
| It's how they sound & play that really makes any difference! |
No, it is not. At least those are not the only factors. The second most expensive thing most people buy (the automobile second to their home) has a new style almost every year. To say that design doesn't matter for musical instruments, simply is not so.
| Quote: |
| or have I missed something in all these years?? |
You have. I'm not attempting to be a smarty, Doug; but believe me, design is a very important factor for steel guitars.
Rick
|
|
|
|
Doug Seymour
From:
Jamestown NY USA (deceased)
|
Posted 17 Jun 2002 4:59 pm
|
|
Once again......too soon old, too late smart!
Oh, dear, (sigh) |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 25 Jun 2002 10:37 pm
|
|
I'm confused. 
When we're talking "design"...are we talking appearance or engineering? |
|
|
|
Jim Cohen
From:
Philadelphia, PA
|
Posted 26 Jun 2002 4:37 am
|
|
| Yes. |
|
|
|
Reggie Duncan
From:
Mississippi
|
Posted 26 Jun 2002 5:56 am
|
|
| How much are the caps? |
|
|
|
